• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.24-29
• /
• 2002

In any rapid prototyping process, the layer by layer building process introduces an area error between the staircase and the surface line specified by the computer-aided design model. This affects the dimensional accuracy as well as the surface finish for different part build orientations. This paper describes a methodology for computing the area error for any orientation of the part built by the fused deposition modelling system. This technique can be applied to determine the best build orientation of the part, based on the minimum area error. This technique is verified by comparing the results with the experimental measurements of the area error of the parts built at different orientations.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1405-1419
• /
• 2018

An image fusion method is proposed on the basis of depth model segmentation to overcome the shortcomings of noise interference and artifacts caused by infrared and visible image fusion. Firstly, the deep Boltzmann machine is used to perform the priori learning of infrared and visible target and background contour, and the depth segmentation model of the contour is constructed. The Split Bregman iterative algorithm is employed to gain the optimal energy segmentation of infrared and visible image contours. Then, the nonsubsampled contourlet transform (NSCT) transform is taken to decompose the source image, and the corresponding rules are used to integrate the coefficients in the light of the segmented background contour. Finally, the NSCT inverse transform is used to reconstruct the fused image. The simulation results of MATLAB indicates that the proposed algorithm can obtain the fusion result of both target and background contours effectively, with a high contrast and noise suppression in subjective evaluation as well as great merits in objective quantitative indicators.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.103-117
• /
• 1993

The purpose of this study is to clarify the adaptation of beauty of traditional dress depicted contemporary Korean fashion design. For this purpose, the external form and the internal meaning based on 'the double roots' proposed by W$\ddot{o}$lfflin were analyzed in Korean traditional dress. Documentary studies and objective studies were done with descriptive and content analytic methods. And homospatial process was devised in order to develop the traditional identity in contemporary fashion design. The results were as follows: 1. As the external form, H. O. A silhouette, chogori, ch'ima, paji, and po concerning internal type, kaftan, flat form related to structured type were represented. Traditional color sense were love of white, contrasting as well as analogous color harmony shown often in nature phenomena, and temperate achromatic color harmony. Texture were characterized as rough and coarse expressing vividness, fine and smooth expressing delicateness and tenderness. As the internal meaning, the beauty of purity related to nature, tragedy, and symbolism were represented. 2. Since 1980's. Korean fashion designers frequently applied unstructural kaftan form and H silhouette to Korean fashion design, and sought natural and pliable line in whole dress. Use of white and achromatic color harmony as well as use of linnen were prominent. Designers' aesthetic consciousness was pursuit of the beauty of nature. Representative designers who concentrated on expressing traditional beauty were Lee Shinwoo, Sul Yoonhyung, Jin Taiok and others. 3. A homospatial process could be a method in the creative design which enables to express Korean identity in fashion design, and could suggest ideas of new designs full of Korean identity by superimposed and fused imaginery.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.1029-1036
• /
• 2012

Push-pull-type copolymers - low-band-gap copolymers of electron-rich fused-ring units (such as cyclopentadithiophene; CPDT) and electron-deficient units (such as benzothiadiazole; BT) - are promising donor materials for organic solar cells. Following a design principles proposed in our previous study, we investigate the electronic structure of a series of new CPDTBT derivatives with various electron-withdrawing groups using the time-dependent density functional theory and predict their power conversion efficiency from a newlydeveloped protocol using the Scharber diagram. Significantly improved efficiencies are expected for derivatives with carbonyl [C=O], carbonothioyl [C=S], dicyano [$C(CN)_2$] and dicyanomethylene [C=$C(CN)_2$] groups, but these polymers with no long alkyl side chain attached to them are likely to be insoluble in most organic solvents and inapplicable to low-cost solution processes. We thus devise several approaches to attach alkyl side chains to these polymers while keeping their high efficiencies.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.281-286
• /
• 2001

In this study, product design and prototype manufacturing of a plastic water-pump pulley has been tried. The designed model is supposed to be made of 33 % glass reinforced resin of which the tensile strength is 180 MPa, and has 24 ribs on each side to increase its structural strength. Structural analysis under a static load of 300 kgf acting on both edges of the belt has been carried out using a commercial finite element code, MARC. The analysis result showed the maximum effective stress near a rib of designed model would be at most 35 MPa (less than 20% of the tensile strength), therefore, the plastic product would be sufficiently safe under that loading condition. On the basis of the structural analysis, a prototype of the designed model has been manufactured by using the fused deposition modelling (FDM) method which is one of the rapid prototyping (RP) methods, using ABS resin and support materials. The CAD data exported to the RP system in STL format was prepared by a commercial solid modeling software, SolidWorks. It has been proved that the plastic pulley can successfully replace the existing flow-formed steel product.

• Journal of the Korean Society of Costume
• /
• v.56 no.7 s.107
• /
• pp.101-114
• /
• 2006

The purpose of this study was to delve into the features of paradigm in conjunction with changing convergence culture in the 21st century's knowledge-based society, the influence of convergence paradigm on fashion, and changes in convergence culture. After identifying the features of the paradigm of knowledge-based society in association with changing convergence culture, the characteristics of fashion paradigm were examined in con=junction with the characteristics of the paradigm, and the convergence phenomena of modern fashion were investigated to figure out fashion trends. The findings of the study were as follows: According to the features of ubiquitous technology based on the theories of Mark Weiser and other futurologists, the characteristics of changing convergence culture in knowledge-based society could be classified into invisibility, relationship and materialized virtuality. When relevant theories were reviewed, invisibility, relationship and materialized virtuality are identified as the unique features of the paradigm of changing convergence culture in knowledge-based society. But those characteristics aren't separate concepts. Instead, they are being connected and fused together, thanks to universalized digital technology and ubiquitous technology. Changing convergence culture has brought a change to fashion paradigm as well. There is a type of design that lets all the characteristics stand out, and another design fuses just some of them together conceptually or formally. That is, fashion paradigm is marked by a combination of invisibility, relationship and an embodiment of virtual reality to be in line with changes in convergence culture.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.453-458
• /
• 2015

We presented a quad-rotor controlling algorithm design by using sensor fusion in this paper. The controller design technique was performed by a PD controller with a Kalman filter and compensation algorithm for increasing the stability and reliability of the quad-rotor attitude. In this paper, we propose an attitude estimation algorithm for quad-rotor based sensor fusion by using the Kalman filter. For this reason, firstly, we studied the platform configuration and principle of the quad-rotor. Secondly, the bias errors of a gyro sensor, acceleration and geomagnetic sensor are compensated. The measured values of each sensor are then fused via a Kalman filter. Finally, the performance of the proposed algorithm is evaluated through experimental data of attitude estimation. As a result, the proposed sensor fusion algorithm showed superior attitude estimation performance, and also proved that robust attitude estimation is possible even in disturbance.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.224-233
• /
• 2016

We propose a new method to visualize 3D models for FDM (Fused Deposition. Modeling) printing that appearance of the printed results can be predicted more realistically as that the efficiency of the modeling-printing process can be improved. The layered nature of horizontal slicing and the vibratory nozzle movements of customer-level FDM 3D printers leaving the characteristic patterns of noisy stripes on the surfaces of printed objects make difficulties in prediction of printed result in company with the thermal contraction of filament material. First, our method analyses the G-codes generated by common slicers to obtain proper outlines and take advantages of a modified version of Perlin noise based texturing method for rendering efficiency and enough number of control parameters on the visual details. The results show improved rendering details of pre-visualization of FDM printing.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.111-118
• /
• 2011

This paper proposed a smart phone tour game using A-GPS. This game is a fused content of tourism and education. This game is based on the historical background of Silla and spatial background of GyoengJu. Game event has occurred by comparing pre-measured GPS values and smart phone A-GPS values. The field test of event were used to correct the A-GPS error by 3 times. This paper has looked at game planning and run screen. In addition, the future direction of the game were discussed.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.149-154
• /
• 2008

Housing may be construed as a place where people are settled for living, namely, family members make a home and a place, where all human living is grounded. Also, the common housing type of a certain time reflects the living of the time. With the advent of the lifestyle of a new social class attaching importance to the multi-purpose of act and function, complexity, and convenience from the 21st century, people required a housing space where work, rest, living, and recreational activities are overlapped, fused, and integrated on the axes of space and time. In addition, along with the expansion of network and digital convergence from a social perspective, the appearance of new businesses, products, and business models affects the life and culture of consumers, which leads to the destruction of the borders and spheres throughout society. Thus, the study analyzed the characteristics of the spatial organizational type of collective housing in Japanese cities since the 1990s and withdrew the organizational type of each room in order to identify the uniquely differentiated characteristics of Japanese housing.