• Steel and Composite Structures
• /
• v.45 no.6
• /
• pp.907-929
• /
• 2022

Compression experiments were conducted to investigate the compressive behavior of built-up open-section columns consisting of four cold-formed steel channels (BOCCFSs) of different lengths, thicknesses, and cross-section sizes (OB90 and OB140). The load-displacement curves, failure modes, and maximum compression strength values were analyzed in detail. The tests showed that the failure modes of the OB90 specimens transformed from a large deformation concentration induced by local buckling to flexural buckling with the increase in the slenderness ratio. The failure modes of all OB140 specimens were deformation concentration, except for one long specimen, whose failure mode was flexural buckling. When the slenderness ratios of the specimens were less than 55, the failure modes were controlled by local buckling. Finite element models were built using ABAQUS software and validated to further analyze the mechanical behavior of the BOCCFSs. A parametric study was conducted and used to explore a wide design space. The numerical analysis results showed that when the screw spacing was between 150 mm and 450 mm, the difference in the maximum compression strength values of the specimens was less than 4%. The applicability and effectiveness of the design methods in Chinese GB50018-2002 and AISI-S100-2016 for calculating the compression strength values of the BOCCFSs were evaluated. The prediction methods based on the assumptions produced predictions of the strength that were between 33% to 10% conservative as compared to the tests and the finite element analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.755-762
• /
• 2000

Entropy coders as a noiseless compression method are widely used as end-point compression for images so there have been many contributions to increase of entropy coder performance and to reduction of entropy coder complexity. In this paper, we propose some entropy coders based on binary forward classification (BFC). BFC requires overhead of classification but there is no change between the amount of input information and that of classified output information, which we prove this property in this paper. And using the proved property, we propose entropy coders which are Golomb-Rice coder after BFC (BFC+GR) and arithmetic coder with BFC(BFC+A). The proposed entropy decoders do not have further complexity Son BFC. Simulation results also show better performance than other entropy coders which have similar complexity to proposed coders.

• Steel and Composite Structures
• /
• v.21 no.2
• /
• pp.357-371
• /
• 2016

Column base connections are critical components in steel structures because they transfer axial forces, shear forces and moments to the foundation. Exposed column bases are quite commonly used in low- to medium-rise buildings. To investigate shear transfer in exposed column base plates, four large scale specimens were subjected to a combination of axial load (compression or tension) and lateral shear deformations. The main parameters examined experimentally include the number of anchor rod, arrangement of anchor rod, type of lateral loading, and axial force ratio. It is observed that the shear resisting mechanism of exposed column base changed as the axial force changed. When the axial force is in compression, the resisting mechanism is rotation type, and the shear force will be resisted by friction force between base plate and mortar layer. The specimens could sustain inelastic deformation with minimal strength deterioration up to column rotation angle of 3%. The moment resistance and energy dissipation will be increased as the number of anchor rods increased. Moreover, moment resistance could be further increased if the anchor rods were arranged in details. When the axial force is in tension, the resisting mechanism is slip type, and the shear force will be resisted by the anchor rods. And the shear resistance was reduced significantly when the axial force was changed from compression to tension. The test results indicated that the current design approach could estimate the moment resistance within reasonable acceptance, but overestimate the shear resistance of exposed column base.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.6
• /
• pp.122-128
• /
• 1998

This paper presents compression of image sequences based on the classification of interframe difference image blocks. classification process consists of image activity classification and energy distribution classification. In the activity classification, interframe difference image blocks are classified into activity blocks and non-activity blocks using the edge detection. In the distribution classification, activity blocks are further classified into vertical blocks, horizontal blocks, and small activity blocks using the AC energy distribution features. The RBFN, trained with numerical classification results, successfully classifies difference image blocks according to image details. Image sequence compressing based on the classification of interframe difference image blocks using the RBFN shows better compression results and less training time than the classical sorting method and the MLP network.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.89-95
• /
• 2016

This study investigated the design factors of the opening area in order to consider the kinematic stability of a valve plate, conducting an analysis of the reduction effects of pressure pulsation and flow ripple depending on the design factors, using the $SimulationX^{(R)}$ (Germany) hydraulic analysis program. Further, we performed a structure analysis to confirm the kinematic stability of the valve plate in a swash plate type piston pump, and analyzed the effects of pulsation on a 1-step V-type notch, 2-step V-type notch, and 2-step U-type notch to determine the effects of pulsation reduction. Finally, we show the effectiveness of our proposed design of the pre-compression sections on a valve plate in terms of low pulsation by using the hydraulic analysis program, $SimulationX^{(R)}$.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.505-510
• /
• 2018

In this study, we allocate bits by quantizing these fractal coefficients through a quantizer which can extract the probability distribution. In the coding process of IFS, a variable size block method is used to shorten the coding time and improve the compression ratio. In the future, it will be necessary to further improve the coding time and the compression rate while maintaining the best image quality in the fractal coding process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2068-2086
• /
• 2011

Based on the quincunx sub-sampling grid, the New Interleaved Hierarchical INTerpolation (NIHINT) method is recognized as a superior pyramid data structure for the lossless and progressive coding of natural images. In this paper, we propose a new image interpolation algorithm, Edge Adaptive Hierarchical INTerpolation (EAHINT), for a further reduction in the entropy of interpolation errors. We compute the local variance of the causal context to model the strength of a local edge around a target pixel and then apply three statistical decision rules to classify the local edge into a strong edge, a weak edge, or a medium edge. According to these local edge types, we apply an interpolation method to the target pixel using a one-directional interpolator for a strong edge, a multi-directional adaptive weighting interpolator for a medium edge, or a non-directional static weighting linear interpolator for a weak edge. Experimental results show that the proposed algorithm achieves a better compression bit rate than the NIHINT method for lossless image coding. It is shown that the compression bit rate is much better for images that are rich in directional edges and textures. Our algorithm also shows better rate-distortion performance and visual quality for progressive image transmission.

• Journal of KIISE:Software and Applications
• /
• v.30 no.7_8
• /
• pp.687-695
• /
• 2003

In this paper, we present a document image compression system based on segmentation, Quincunx downsampling, (5/3) wavelet lifting and subband-oriented SPIHT coding. We reduced the coding time by the adaptation of subband-oriented SPIHT coding and Quincunx downsampling. And to increase compression rate further, we applied arithmetic coding to the bitstream of SPIHT coding output. Finally, we present the reconstructed images for visual comparison and also present the compression rates and PSNR values under various scalar quantization methods.

• Journal of ILASS-Korea
• /
• v.17 no.2
• /
• pp.71-76
• /
• 2012

The aim of this work was to investigate the combustion and nanoparticle emission characteristics of premixed charge compression ignition (PCCI) combustion at various test conditions using a single cylinder common-rail diesel engine. In order to create the homogeneity of fuel-air mixture, the premixed fuel (gasoline) was injected into premixing chamber during the intake process and then the diesel fuel was directly injected into the combustion chamber as an ignition source for the gasoline premixture. From these results, it revealed that the ignition delays and combustion durations were gradually prolonged and the peak combustion pressure were increased because diesel fuel was injected early injection timing with the increase of premixed ratio. In addition, as the increase of premixed ratio, total particle number is generally decreased and particle volume also indicated low levels at the direct injection timing from BTDC $20^{\circ}$ to TDC. At further advanced injection timing, total particle number and volume were generally increased

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1124-1131
• /
• 2008

Thanks to a new in-situ seismic probe, using bender elements and penetration scheme, a simple linear relationship between undrained shear strength(Cu) and shear wave velocity(Vs) was obtained. This priceless relationship is worthy to be illuminated further in ideal laboratory environment. To avoid sampling disturbance effect, special consolidation cylinders were used to make normally consolidated specimens from kaolinite suspension. The undrained shear strengths of the specimens were measured using unconsolidated undrained triaxial compression tests. Also shear wave velocity measurements were performedprior to shearing the same specimens, using the bender elements installed in the base pedestal and the top cap of the triaxial compression cell. The Cu-Vs relationship is fairly linear and supports the linear trend of clayey silt obtained using field testing. Also the classic density-shear modulus relationship for soft clay proposed by Hardin and Black(1969) was once more verified hereby.