• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.117-120
• /
• 2007

The main purpose of this paper is to introduce the early traffic opening-capable continuous multi-layer asphalt pavement maintenance method using electric arc furnace slag aggregate and emulsified asphalt to the actual construction sites. As well known, the previous surface treatment method of emulsified asphalt mixture have various shortcomings such as long work-time, traffic congestions, plastic deformation and poor evenness. Thus, the proposed method has enabled tile early traffic opening by utilizing the optimized emulsified asphalt after consideration of the climate and road conditions in Korea. The application of the electric furnace slag with $6\;{\sim}\;18\;mm$ thickness is helpful to become a environment-friendly construction method. And also, it has been improved enough to accommodate night-time works of mechanized construction activities for wearing course and control course.

• 대한전기학회논문지
• /
• 제40권12호
• /
• pp.1262-1268
• /
• 1991

The electric furnace which has time delay and time varying characteristics cannot be controlled easily. In this paper, a fuzzy controller for a electric furnace is implemented using one chip processor 8751 and IBM PC. The fuzzy controller is implemented in the PC. The One chip processor 8751 can sense the furnace internal temperature and pass it to IBM PC and generate the driving signal for SSR. The membership function of the fuzzy controller is determined by Least Square method. from the experiments, we can show that the fuzzy controller can improve robustness to the load variation. And the settling time is reduce 4500 (sec) to 2500 (sec).

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.512-517
• /
• 2009

순산소 연소에서 $SO_2$ 농도는 배가스의 재순환으로 인해 기존의 공기연소에 비해 3배 이상 높게 나타나고, $CO_2$ 농도와 $SO_2$ 농도가 높기 때문에 탈황현상이 기존의 공기 연소와는 다르게 나타난다. 본 연구에서는 순산소 연소조건에서 로내탈황 특성을 알아보기 위해 Drop Tube Furnace(DTF)를 이용하여, 반응온도, 유입 $SO_2$ 농도 그리고 Ca/S 비 등의 운전변수에 따른 $SO_2$ 제거효율을 측정하였으며 수분의 영향에 대해서도 알아보았다. 반응온도, 유입 $SO_2$ 농도 그리고 Ca/S 비가 증가함에 따라 $SO_2$ 제거효율은 증가하였고 유입가스 내 수분이 존재할 경우 $SO_2$ 제거효율은 약 4~6% 증가하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.453-456
• /
• 2006

In this study, the experiment was carried out to investigate and analyze the influence of fineness of blast furnace slag powder on the properties of high strength concrete. The main experimental variables were water/binder ratio 27.5, 31.5, 35.5(%) water content $165kg/m^3$ and mineral admixtures such as blast furnace slag powder. Even in a case where the ratio of blast furnace slag powder is 70%, using a fineness of 8000 grade afforded a higher strength development than using a plain concrete, which indicates the potential of high utilization in the future. Although it has been pointed out that the concrete using blast furnace slag powder has a problem of yielding relatively low rate of strength development in the early age, it is demonstrated that this can be resolved by using a powder with fineness greater than 6000 grade. It is considered necessary that powder fineness should be upgraded for the applications such as high performance concrete to be used in high strength required areas by considering hydration heat control and early strength requirements in the future.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.195-200
• /
• 2014

Occupational fatal injury rate per 10,000 population of Korea is still higher among the OECD member countries. To prevent fatal injuries, the causes of accidents including human error should be analyzed and then appropriate countermeasures should be established. There was an severe converter furnace accident resulting in five people death by chocking in 2013. Although the accident type of the furnace accident was suffocation, many safety problems were included before reaching the death of suffocation. If the safety problems are reviewed throughly, the alternative measures based on the review would be very useful in preventing similar accidents. In this study, we investigated the converter furnace accident by using human error analysis and accident scenario analysis. As a result, it was found that the accident was caused by some human errors, inappropriate task sequence and lack of control in coordinating work by several subordinating companies. From the review of this case, the followings are suggested: First, systematic human error analysis should be included in the investigation of fatal injury accidents. Second, multi man-machine accident scenario analyis is useful in most of coordinating work. Third, the more provision of information on system state will lessen human errors. Fourth, the coordinating control in safety should be performed in the work conducting by several different companies.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2003년도 추계학술대회 및 정기총회
• /
• pp.201-204
• /
• 2003

A hybrid artificial intelligence approach based on combining case based reasoning and neural networks is presented. The approach is designed to allow for solving blowing control of BOF(basic oxygen furnace), example of which lie at the core of steelmaking process control systems application in the steel industry. According to this hybrid approach, the system, when faced with a new problem, first retrieves similar cases and neural network is used to solve the problem. Experimental Results indicate that combining case based reasoning and neural network offers an efficient approach to solving control and prediction problem

• 콘크리트학회논문집
• /
• 제14권4호
• /
• pp.597-607
• /
• 2002

우리나라에서 2000년도에 발생된 전기로 및 전로슬래그를 합하면 약 600만 톤 정도로서 주로 도로포장재료 및 매립재 등과 같은 한정된 용도로만 활용되어 왔다. 그 이유는 제강과정 중 유리석회가 슬래그화 되지 않고 불안정한 상태로 슬래그 내부에 잔존하기 때문에 콘크리트 구조물 내에서 팽창을 일으킬 가능성이 클 뿐만 아니라, 팽창이 심할 경우 구조물의 균열 내지는 붕괴까지도 야기 시킬 수 있으므로 콘크리트용 골재로 사용해서는 안 된다고 규정하고 있다. 따라서 제강슬래그를 콘크리트용 골재로 사용하기 위해서는 제강슬래그 자체의 팽창성 억제 내지는 안정화 처리가 우선 해결되어야 할 과제로 생각된다. 본 연구에서는 제강슬래그 골재의 팽창성을 저감시키기 위한 목적으로 6종류의 에이징 방법을 선정하여 안정화의 효율에 대하여 비교 검토하였다. 전로슬래그 골재의 경우, 본 연구에서 실시한 에이징 처리 방법으로서는 콘크리트용 골재로서 요구되는 팽창률을 저감시키는데 한계가 있었을 뿐만 아니라, 에이징 처리한 전로슬래그 골재 사용 콘크리트의 강도도 재령과 더불어 감소하는 문제점이 있음을 확인하였다. 그러나 전기로슬래그 골재를 온수중 및 증기중 에이징 처리할 경우, 팽창률이 전로슬래그 골재의 약 2/3 정도에 지나지 않는 효율을 나타내었으며, 이를 사용한 콘크리트의 강도도 전로슬래그 골재 사용 콘크리트와는 달리 보통콘크리트의 강도에 상응하는 비교적 좋은 결과를 나타내므로 콘크리트용 골재로서 사용 가능성을 시사하였다.

• 한국건설순환자원학회논문집
• /
• 제3권4호
• /
• pp.301-306
• /
• 2015

이 연구에서는 해양 콘크리트의 균열저항성 및 내구성을 향상시킨 고성능 해양 콘크리트 개발 연구의 일환으로 광물질 혼화재를 혼입한 콘크리트의 강도, 수화발열 특성 및 염해저항성에 대한 해석적 평가를 실시하였다. 고로슬래그와 플라이애시를 광물질 혼화재로 검토하였으며, 고로슬래그 치환율은 70%까지 플라이애시 치환율은 40%까지 검토하였다. 해석검토 결과, 고로슬래그 및 플라이애시 치환은 모두 압축강도를 크게 저하시키는 결과를 보였으며, 수화발열 특성에서는 고로슬래그는 영향이 적은 반면, 플라이애시는 수화발열량 저감에 크게 효과가 있는 것으로 나타났다. 염소이온 침투 특성에서는 고로슬래그는 침투저항성을 증대시키는 반면, 플라이애시는 저하시키는 경향을 보였다. 해석적 평가를 통해 수화열과 염해내구성을 동시에 고려할 경우, 적절한 양의 고로슬래그와 플라이애시를 함께 사용한 3성분계 시멘트 배합 구성이 효과적일 것으로 판단된다.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.120-127
• /
• 2009

An electric furnace, inside which desired temperatures are kept constant by generating heat, is known to be a difficult system to control and model exactly because system parameters and response delay time vary as the temperature and position are changed. In this study the heating system of ceramic drying furnaces with time-varying parameters is mathematically modeled as a second order system and control parameters are estimated by using a RIV (Recursive Instrumental-Variable) method. A modified bang-bang control with magnitude tuning is proposed in the time optimal temperature control of ceramic drying electric furnaces and its performance is experimentally verified. It is proven that temperature tracking of adaptive time optimal control using a second order model is more stable than the GPCEW (Generalized Predictive Control with Exponential Weight) and rapidly settles down by pre-estimation of the system parameters.

• 제어로봇시스템학회논문지
• /
• 제16권10호
• /
• pp.1006-1012
• /
• 2010

The hot rolling process ranks the highest position for production in steel making process. The hot strip manufacturing processes consist of the reheating furnace, roughing and finishing mill and coiler. The reheating furnace heats the slab. The roughing and finishing mill produce the hot strip from slab. The hot strip quality mainly depends on finishing mill, which consists of 4-high 7 stands. The looper is installed between stands and is used for controlling the strip tension by the looper angle for better material flow. It is difficult to control the strip tension with the coupled looper system from interaction between the looper angle and strip tension. Too much deviation of strip tension severely affects the poor width quality of the hot strip. It is important to control simultaneously both the looper angle and strip tension with each of their target values. This paper proposes the fuzzy tension control, which is developed to minimize the width deviation of the hot strip by maintaining the proper strip tension between stands and to achieve the stable operation of the coupled looper system. The fuzzy tension control performance is compared with the conventional PID control by experimental results.