• 제목, 요약, 키워드: Fur quality

검색결과 236건 처리시간 0.033초

금석문 영상 향상을 위한 형태학적 필터 (Morphological Filter for Enhancement of Monumental Inscription Image)

  • 김기석;최호형
    • 한국산업정보학회:학술대회논문집
    • /
    • /
    • pp.311-317
    • /
    • 2001
  • The study on Shilla monumental inscription has beer accomplished by many historians. However, the research on enhancement of monumental inscription image using digital image processing technique is not sufficient. The preprocessing using computer is needed fur accurate interpretation of history. In this paper, digital image enhancement algorithm based on mathematical morphology for noise reduction and character clearness is proposed. In the experiment, the subjective image quality is improved using the proposed algorithm.

  • PDF

Calculation of Equivalent Feeder Geometries for CANDU Transient Simulations

  • Cho, Seungyon;Muzumdar, Ajit
    • 한국원자력학회:학술대회논문집
    • /
    • /
    • pp.429-436
    • /
    • 1995
  • This paper describes a methodology for determination of representative CANDU feeder geometry and the pressure drops between inlet/outlet header and fuel channel in the primary loop. A code, MEDOC, was developed based on this methodology and helps perform a calculation of equivalent feeder geometry for a selected channel group on the basis of feeder geometry data (fluid volume, mass flow rate, loss factor) and given property data pressure, quality, density) at inlet/outlet header. The equivalent feeder geometry calculated based on this methodology will be useful fur the transient thermohydraulic analysis of the primary heat transport system for the CANDU heavy water-cooled pressure tube reactor.

  • PDF

Effect of Drawing Parameters on the evenness of C/P Blended Rovings

  • Kim Gyu-Ho;Lee Dae-Hun;Ju Chang-Hwan
    • 한국섬유공학회:학술대회논문집
    • /
    • /
    • pp.398-401
    • /
    • 1998
  • The evenness of roving is greatly important fur the improvement of quality in final yarns. In order to produce even rovings, all fibers would have to be uniformly distributed over the whole rovings. However, that is ruled out by the inhomogeneity of fiber materials aid by the mechanical constraint. Accordingly, there are limits to the achievable fiber assembly evenness. Also, since the evenness of roving has greatly influenced on the evenness of slivers in drawing process, the optimum condition of drawing process is very important. (omitted)

  • PDF

호텔.레스토랑의 서비스품질 인식 차이(Gap)와 경영성과 간의 상관성 (The Effect of Cognitive Gap on the Hotel Restaurant Performance)

  • 나영선;박기안;이훈영
    • 한국조리학회지
    • /
    • v.8 no.2
    • /
    • pp.37-58
    • /
    • 2002
  • Up to these days, hotels are assumed to compete each other. Due to the spread of high quality the hotel restaurants have begun to face an intensive competition. Hotel food at Beverage have become the more competitive along with fund, good price, service, quality food, and management know-how. It causes the hotel restaurants confront with management difficulties. In order to overcome the management difficulties, hotel restaurants have to improve their marketing abilities and especially to improve their service quality. For this, it is necessary fur hotel restaurants to investigate how their service providers and receivers recognize their service quality. In this research, we examined the cognitive three types of cognitive gaps among customers, service providers, and managers both on the service quality and on the positioning of hotel restaurants. Their cognitive gaps proved negatively correlated with hotel's performance. This research suggests the following findings. Firstly, the competitiveness of hotel restaurant depends on the accurate communication and consensus among managers, service providers, and customers. Secondly, using the information about cognitive gaps recognized, each hotel restaurant should develop concrete marketing plans and strategies with a careful consideration about its current competitive position and management condition.

  • PDF

Plate and Shell 열교환기내의 R-22 응축압력강하 특성에 관한 실험적 연구 (An Experimental Study on Pressure drop Characteristics in Plate and Shell Heat Exchanger)

  • 이기백;서무교;박재홍;김영수
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.25 no.6
    • /
    • pp.1220-1227
    • /
    • 2001
  • The condensation pressure drop fur refrigerant R-22 flowing in the plate and shell heat exchanger were investigated experimentally in this study. Two vertical counterflow channels were formed in the exchanger by three plates of commercial geometry with a corrugated trapezoid shape of a chevron angel of $45^{\circ}$. The condensing R-22 flowing down in one channel exchanges heat with the cold water flowing up in the other channel. The effects of the mean vapor quality, mass flux, average imposed heat flux and system pressure of R-22 on the pressure drop were explored in detail. The quality change of R-22 between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.05. The present data showed that pressure drop increases with the vapor quality. At a higher mass flux, pressure drop is higher for the entire range of the vapor quality. Also, a rise in the average imposed heat flux causes an slight increase in the Pressure drop. Finally, at a higher system pressure the pressure drop is found to be slightly lower. Correlation is also provided for the measured pressure drops in terms of the friction factor.

  • PDF

호주 재택 노인을 위한 주택수리 및 개조사례 연구 - 멜버른과 시드니를 중심으로 - (A Case Study on Reusing Maintenance and Alterations by the Elderly Residing Melbourne and Sydney in Australia)

  • 이영심;이상해
    • 한국주거학회논문집
    • /
    • v.13 no.1
    • /
    • pp.44-52
    • /
    • 2002
  • As a result of the expansion of the nuclear family in society, there has been an increase in the number of elderly people who want to live independently of their children. Australia is one of the countries which has initiated an extensive welfare program for its senior citizens. These services include maintenance of, and alterations to their own homes to make living conditions safer and more manageable. This case study was aimed at finding ways of adapting the services provided in Australia, to meet the needs of elderly Koreans who are in similar situations. It evaluated houses which had been renovated and altered fur the normal as well as the disabled elderly in both Melbourne and Sydney. results of research were as following : 1) Most elderly usually wished to remain as long as possible in their own home and it made them very stable in psychologically. 2) Housing maintenance and alterations were provided as one of social care services fur elderly with low expense and loan from government. 3) Many elderly were also getting various kinds of social services, fur example, meals on wheels, transportation and cleaning service with housing alterations and these ones let their quality of life more improved. 4) Occupational therapist and Architect were always involved in the process of housing alterations for disabled elderly. 5) The alterations which related to bathroom, toilet and steps were very popular and those were considered essential design guide applications for planning of housing for elderly in the future.

PDP용 무연 투명유전체의 Dry Film 개발 (Development of Dry Films of Lead-free Transparent Dielectrics for PDP)

  • 이지훈;방재철
    • 한국산학기술학회논문지
    • /
    • v.6 no.6
    • /
    • pp.497-501
    • /
    • 2005
  • Dry film 공정에 의해 PDP(Plasma Display Panel)용 무연 투명유전체를 제조하였다. 여러 슬러리 조성으로부터 고밀도 green sheet를 제조하는데 최적의 조성을 선정하였다. 한편, 슬러리는 양질의 green sheet를 제작하는데 적합한 shear thinning 특성을 나타냈다. 제조한 투명유전체의 열팽창계수는 유리기판인 PD-200과 유사한 $97{\times}10^{-7}/^{\circ}C$로 측정되었다. PD-200에 접합된 투명유전체의 단면 주사현미경 관찰로부터 두 층은 갭이 없이 매우 견실히 접합되어 있음을 확인할 수 있었다.

  • PDF

Parameter Design and Analysis for Aluminum Resistance Spot Welding

  • Cho, Yong-Joon;Li, Wei;Hu, S. Jack
    • Journal of Welding and Joining
    • /
    • v.20 no.2
    • /
    • pp.102-108
    • /
    • 2002
  • Resistance spot welding of aluminum alloys is based upon Joule heating of the components by passing a large current in a short duration. Since aluminum alloys have the potential to replace steels fur automobile body assemblies, it is important to study the process robustness of aluminum spot welding process. In order to evaluate the effects of process parameters on the weld quality, major process variables and abnormal process conditions were selected and analyzed. A newly developed two-stage, sliding-level experiment was adopted fur effective parameter design and analysis. Suitable ranges of welding current and button diameters were obtained through the experiment. The effects of the factors and their levels on the variation of acceptable welding current were considered in terms of main effects. From the results, it is concluded that any abnormal process condition decreases the suitable current range in the weld lobe curve. Pareto analysis of variance was also introduced to estimate the significant factors on the signal-to-noise (S/N) ratio. Among the six factors studied, fit-up condition is found to be the most significant factor influencing the SM ratio. Using a Pareto diagram, the optimal condition is determined and the SM ratio is significantly improved using the optimal condition.

단속형 가변 적층 쾌속 초형 공정(VLM-ST)을 위한 정밀도 향상에 관한 연구 및 실험적 검증 (Accuracy Improvement in Transfer-Type Variable Lamination Manufacturing Process using Expandable Polystyrene Foam and Experimental Verification)

  • 최홍석;안동규;이상호;양동열
    • 한국정밀공학회지
    • /
    • v.19 no.7
    • /
    • pp.97-105
    • /
    • 2002
  • The use of rapid prototyping (RP) has reduced time to market, cut total costs and improved product quality by giving design and manufacturing teams the opportunity to verify and fine tune designs before committing them to expensive tooling and fabrication. In order to improve their unique characteristics according to the working principles, Variable Lamination Manufacturing process (VLM-ST) and corresponding CAD/CAM software (VLM-Slicer) is developed. The objective of this study is to improve the accuracy of VLM-ST process, and it can be done by offset fur cutting error correction, cutting path overrun fur sharp edge and reference shape generation for off-line stacking. It has been shown that, through the verification experiments for given practical shapes, the proposed algorithms are effective for diverse categories of three-dimensional shapes.

Services of Algae to the Environment

  • Rai, Lal-Chand;Har Darshan Kumar;Frieder Helmut Mohn;Carl Johannas Soeder
    • Journal of Microbiology and Biotechnology
    • /
    • v.10 no.2
    • /
    • pp.119-136
    • /
    • 2000
  • Being autotrophic, algae occupy a trategic place in the biosphere. They produce oxygen both directly and indirectly through the chloroplasts of all green plants. The chloroplasts are believed to have originated from archaic prokaryotic algae through endosymbiosis with primitive eukaryotic cells. Phytoplankton and other algae regulate the global environment not only by releasing oxygen but also by fixing carbon dioxide. They affect water quality, help in the treatment of sewage, and produce biomass. They can be used to produce hydrogen which is a clean fuel, and biodiesel, and fix $N_2$ for use as a biofertilizer. Some other services of algae to the environment include restoration of metal damaged ecosystems, reducing the atmospheric $CO_2$ load and citigating global warming, reclamation of saline-alkaline unfertile lands, and production of dimethyl sulphide (DMS) and oxides of nitrogen (NOx) involved in the regulation of UV radiation. ozone concentration, and global warming. Algae can be valuable in understanding and resolving certain environmental issues.

  • PDF