• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.165-168
• /
• 2016

Surface protein internalin (InlA) is a major virulence factor of the food-borne pathogen L. monocytogenes. It plays an important role in bacteria crossing the host's barrier by specific interaction with the cell adhesion molecule E-cadherin. Study of this protein will help to find better ways to prevent listeriosis. In this study, a monoclonal antibody against InlA was used to detect InlA. The reaction was label-free and monitored in real time with an oblique-incidence reflectivity-difference (OI-RD) technique. The kinetic constants k_on and k_off and the equilibrium dissociation constant K_d for this reaction were also obtained. These parameters indicate that the antibody is capable of detecting InlA. Additionally, the results also demonstrate the feasibility of using OI-RD for proteomics research and bacteria detection.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.459-463
• /
• 2009

The adsorption features of malachite green onto activated carbon have been investigated for its treatment from aqueous solution. The influential factors were examined the initial concentration of malachite green, reaction temperature, and pH. Under experimental conditions, adsorption equilibrium of malachite green was attained within 2 hr after the adsorption started. The adsorption reaction of malachite green followed the pseudo-second order rate model, and the adsorption rate constants(k2) decreased with increasing initial concentrations of malachite green. Adsorption behavior of malachite green on activated carbon was found to follow the Freundlich model well in the initial adsorbate concentration range. With increase in temperature, the adsorbed amount of malachite green at equilibrium increased, which indicate that the adsorption reaction was endothermic reaction. Thermodynamic parameters for malachite green adsorption reaction were estimated at varying temperatures, and in the pH range of 2-10, adsorption of malachite green increased.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1485-1490
• /
• 2008

This paper proposes a new Fourier transform-based phasor estimation method to eliminate the adverse influence of the exponentially decaying dc offsets when Discrete Fourier Transform (DFT) is used to calculate the phasor of the fundamental frequency component in a relaying signal. By subtracting the result of odd-sample-set DFT from the result of even-sample-set DFT, the information of dc offsets can be obtained. Two dc offsets in a relaying signal are treated as one dc offset which is piecewise approximated in one cycle data window. The effect of the dc offsets can be eliminated by the approximated dc offset. The performance of the proposed algorithm is evaluated by using computer-simulated signals and EMTP-generated signals. The algorithm is also tested on a hardware board with TMS320C32 microprocessor. The evaluation results indicate that the proposed algorithm has the stable and accurate eliminating performance even if the input signal contains two decaying dc components having different time constants.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.353-354
• /
• 2014

An active vibration control technique of a time-varying cantilever beam is proposed in this study. A simple in-house coil sensor instead of expensive commercial sensors was used to measure the vibrational displacement of the beam. Active band pass filters and artificial neutral net works detect the frequencies, amplitudes, and phases of the main vibration mode. The time constants of the low pass filter representing the positive position feedback controller are updated in real-time, which generates the control voltage input to actuate the piezoelectric actuator and suppress the vibration. An experiment was successfully performed to verify the algorithm for a cantilever beam, which fundamental natural frequency arbitrarily varies between 9 Hz ~ 18 Hz. The present active vibration suppression technique can be applied to variety of structures which undergoes large variation of dynamic characteristics while operating.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.961-966
• /
• 2000

It is difficult to change or remedy concrete structure after hardened. It is usual to evaluate the quality of hardened concrete using several test method. This study was performed to make fundamental data that could be used to evaluate the quality of hardened concrete. This study is to estimate mix proportion of hardened concrete. Each elements of concrete needed different estimation methods. First, the cement that handled by the most important compounds measured by XRF(X-ray fluorecence) machine with scanning Ca-K${\alpha}$. Second, the coarse aggregate that divided by maximum size measured by the area comparison method that starts from the assumption of uniform distribution. Third, the fine aggregate measured by the weight comparison method that needs several prerequsite constants which concerned cement hydration reaction. Fourth, the water content would be estimated by expert system that has data base of design data, the contents of above estimation results, the characteristics of concrete strength. As the result of the above research, some conclusions are as follows. The cement estimation method resulted by reliability of mean 96.7%, standard deviation 3.92. The area comparison method resulted by reliability of mean 95.3%, standard deviation 2.08. The weight comparison method resulted by reliability of mean 93.3%, standard deviation 3.35.

• 한국재료학회지
• /
• 제3권1호
• /
• pp.19-27
• /
• 1993

RF magnetrom sputtering으로 52/48 PZT target을 사용하여 PZT thin film을 증착시킨후, furnace annealing을 실시하여 Si 기판에서는 55$0^{\circ}C$에서부터 안정상인 peroskite구조가 형성되었다. Si기판위에서는 후속열처리시 계면에 상당한 산화막층이 형성되었으며 TiN 기판위에서는 후속열처리시 TiN층은 사라지고 Ti$O_2$층이 형성되었다. Si$O_2$기판에서는 후속열처리후에도 안정한 PZT film을 형성시킬 수 있었다. As-depo.시에는 PZT film의 조성비가 균일하게 유지되었으나 75$0^{\circ}C$후속열 처리시에는 상당량의 Pb가 Si기판으로 diffusion하였으며 Si도 out-diffusion하였다. 전기적 특성은 10KHz에서 C-V를 측정결과 약 1300정도의유전상수 값이 나왔으나 후속열처리시 표면에 crack이 발생하였다.

• 분석과학
• /
• 제10권5호
• /
• pp.370-377
• /
• 1997

Co(II), Cu(II) 및 Zn(II) 이온을 디티존으로 용매추출하는 과정에서의 여러 가지 기초적인 정보에 대해 조사하였다. $25^{\circ}C$에서 클로로포름에 녹인 디티존의 수용액상과 유기상 사이에서 구한 $K_{a1}/K_p$값은 $4.72{\times}10^{-11}$이었다. 금속 이온과 디티존이 착물을 형성할 때의 조성비를 몰비법을 이용하여 조사하였다. 금속-디티존 착물이 수용액과 클로로포름 용매 사이에서 분배되는 평형에서의 추출률은 Co(II)의 경우 pH 8.0에서 92.3%이고, Cu(II)의 경우는 pH 4.0에서 97.1%이며, Zn(II)은 pH 7.0에서 99.0%로서 최대값을 나타내었다. 그리고 최적의 실험조건하에서 Co(II), Cu(II) 및 Zn(II)이온에 대한 추출상수를 결정하였다.

• 한국지반공학회지:지반
• /
• 제3권1호
• /
• pp.25-38
• /
• 1987

항타응력의 추정은 말뚝박기 해머의 선정, 기성말뚝의 설계, 말뚝박기 가능성의 판단 및 말뚝박기 시방서의 각성에 필요 불가결하다. 그러나, 현재 사용되고 있는 Newton의 충격이론에 의한 경타공식들은 토질이나 해머의 용량에 따라 나름데로 결함을 갖고 있으며, 파동방정식에 의하여 해석된 수치해석법은 대형컴퓨터를 사용하 여야 하고 몇가지의 토질정수를 가정에 의하여 입력하는 것과 말뚝을 타격할 때마다 누적되는 잔재 응력을 고려하지 않는 등의 이유로 즉시추정에는 제약이 따르고 오차가 누적되는 결과를 초래할 수 있으며, 또 한편, 계기에 의하여 항타응력을 실측하는 것은 많은 비용과 시간이 소요된다. 그러므로, 본 연구에서는 항타응력을 파동이론 및 말뚝의 잔류응력에 의하여 항타응력에 가장 크게 영향을 미치는 변수들을 고려하여 해석하므로써 대형컴퓨터를 사용할 수 없는 현장에서 말뚝의 전장에 걸쳐 항타응력을 추정할 수 있는 간편한 산출식을 제시하고, 이의 신뢰성을 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.35-39
• /
• 2000

$ZnIn_2S_4$ and $ZnGaInS_4:Er^{3+}$ single crystals crystallized in the rhombohedral (hexagonal) space group $C_{3v}^5(R3m)$, with lattice constants $a=3.852{\AA},\;c=37.215{\AA}$ for $ZnIn_2S_4$, and $a=3.823{\AA}$, and $c=35.975{\AA}$ for $ZnIn_2S_4:Er^{3+}$. The optical absorption measured near the fundamental band edge showed that the optical energy band structure of there compounds had a direct and indirect band gap, the direct and indirect energy gaps are found to be 2.778 and 2.682 eV for $ZnIn_2S_4$, and 2.725 and 2.651eV for $ZnIn_2S_4:Er^{3+}$ at 293 K. The photoluminescence spectra of $ZnIn_2S_4:Er^{3+}$ measured in the wavelength ranges of $500nm{\sim}900nm$ at 10 K. Eight sharp emission peaks due to $Er^{3+}$ ion are observed in the regions of $549.5{\sim}550.0nm,\;661.3{\sim}676.5nm$, and $811.1{\sim}834.1nm$, and $1528.2{\sim}1556.0nm$ in $CdGaInS_4:Er^{3+}$ single crystal. These PL peaks were attributed to the radiative transitions between the split electron energy levels of the $Er^{3+}$ ions occupied at $C_{2v}$, symmetry of the $ZnIn_2S_4$ single crystals host lattice.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.56-59
• /
• 2000

$CdGaInS_4$ and $CdGaInS_4:Er^{3+}$ single crystals crystallized in the rhombohedral(hexagonal) structure. with lattice constants $a=3.913{\AA},\;c=37.245{\AA}$ for $CdGaInS_4$, and $a=3.899{\AA}$ and $c=36.970{\AA}$ for $CdGaInS_4:Er^{3+}$. The optical absorption measured near the fundamental band edge showed that the optical energy band structure of these compounds had a direct and indirect band gap. the direct and indirect energy gaps are found to be 2.771 and 2.503 eV for $CdGaInS_4$, and 2.665 and 2.479 eV for $CdGaInS_4:Er^{3+}$ at 10 K. The temperature dependence of the optical energy gap was well represented by the Varshni equation. In $CdGaInS_4$, the values of ${\alpha},\;{\beta}$ of the direct and the indirect energy gap were found to be $7.57{\times}10^{-4}eV/K$. $6.53{\times}10^{-4}eV/K$ and 240K. 197K. and the values of ${\alpha}$ and ${\beta}$ of the direct and the indirect energy gap in the $CdGaInS_4:Er^{3+}$ were given by $8.28{\times}10^{-4}eV/K,\;2.08{\times}10^{-4}eV/K$ and 425 K, 283 K, respectively.