• Journal of Navigation and Port Research
• /
• v.35 no.4
• /
• pp.335-342
• /
• 2011

The purposes of this study were to analyze the effects of a marine leisure exhibition event(MLEE)'s appraisal attributes on visitors' satisfaction and rep-visit intention and thus provide fundamental information that facilitates developing effective marketing and operational strategies for a MLEE. In order to accomplish such purposes, this study employed a survey with a total of 300 visitors to a MLEE hosted by G Province. Questionnaires were developed on the basis of related studies and modified to reflect the study context. Then, such questionnaires were verified to be valid and reliable through content validity, factor analysis and internal consistency analysis. Valid 286 questionnaires were analyzed with correlation analysis and multiple regression analysis on significance level of .05. Following findings were derived from current study. First of all, the appraisal attributes of a MLEE had a significant effect on visitors' satisfaction and among them only the factor of event program had a unique relation with the levels of satisfaction. In addition, the appraisal attributes of the MLEE also had a significant effect on visitors' rep-visit intention behavior and among them event program, transportation and employee factors had unique relations with the performance variable in order. In conclusion, all the research hypotheses that had been set up through previous studies were confirmed in this study.

• Clinical and Experimental Pediatrics
• /
• v.50 no.12
• /
• pp.1165-1172
• /
• 2007

Self/non-self discrimination and unresponsiveness to self is the fundamental properties of the immune system. Self-tolerance is a state in which the individual is incapable of developing an immune response to an individual's own antigens and it underlies the ability to remain tolerant of individual's own tissue components. Several mechanisms have been postulated to explain the tolerant state. They can be broadly classified into two groups: central tolerance and peripheral tolerance. Several mechanisms exist, some of which are shared between T cells and B cells. In central tolerance, the recognition of self-antigen by lymphocytes in bone marrow or thymus during development is required, resulting in receptor editing (revision), clonal deletion, anergy or generation of regulatory T cells. Not all self-reactive B or T cells are centrally purged from the repertoire. Additional mechanisms of peripheral tolerance are required, such as anergy, suppression, deletion or clonal ignorance. Tolerance is antigen specific. Generating and maintaining the self-tolerance for T cells and B cells are complex. Failure of self-tolerance results in immune responses against self-antigens. Such reactions are called autoimmunity and may give rise to autoimmune diseases. Development of autoimmune disease is affected by properties of the genes of the individual and the environment, both infectious and non-infectious. The host's genes affect its susceptibility to autoimmunity and the environmental factors promote the activation of self-reactive lymphocytes, developing the autoimmunity. The changes in participating antigens (epitope spreading), cells, cytokines or other inflammatory mediators contribute to the progress from initial activation to a chronic state of autoimmune diseases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.255-258
• /
• 2009

Leading developed countries have studied energy self-sufficient houses such as zero or low energy buildings to reduce energy consumption for buildings since the early 1990s. Moreover, some developed countries have actually constructed self-sufficient houses and operated them for demonstration, expanding use of such houses. Korea has also established Zero Energy Solar House(ZeSH) and studied energy independence. Therefore, this study analyzed research result regarding ZeSH, self-sufficient energy house hold of Korea, found out technologies used for heating energy independence, used building interpretation program(ESP_r) to evaluate performance of each factors and analyzed energy reduction quantitatively. Results from the research are as follows: Reduction rate of actual detached house's heating load was also analyzed quantitatively depending on application of each technology. When each factor was applied step-by-step, annual reduction rate of heating load depending on increase in insulation thickness reached 6.6~22.2 %. Annual reduction rate of heating load depending on increase insulation thickness, and change in window heating performance and area ratio reached 31.5 %. Annual reduction rate of heating load through high-sealing and high-insulation depending on change in leakage rate reached 40.0~88.9 %. Annual reduction of heating load, when Mass Wall and attached sun space was applied were applied reached 28.5~39.2 %, respectively.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.493-501
• /
• 1995

Optimum design of a viscoelastic damping layer which is unconstrainedly cohered on a steel plate is discussed from the viewpoint of the modal loss factor. Themodal loss factor is analyzed by using the energy method to the base steel plate and cohered damping layer. Optimum distributions of the viscoelastic damping layer for modes are obtained by sequentially changing the position of a piece of damping layer to another position which contributes to maximizing the modal loss factors. Analytical procedure performed by using this method simulated for 3 fundamental modes of an edge-fixed plate. Simulated results indicate that the modal loss factor ratios can be increase by as much as 210%, or more, by optimizing the thickness distribution of the damping layer to two times of the initial condition which is entirely covered. Optimum configurations for the modes are revealed by positions where added damping treatments become most effective. The calculated results by this method are validated by comparison with the experimental results and the calculated results obtained by the Ross-Ungar-Kerwin's model in the case of the layer is uniformly treated over the steel plate.

• Journal of Mechanical Science and Technology
• /
• v.16 no.6
• /
• pp.851-860
• /
• 2002

In this study, it was attempted to obtain the fundamental data for the formation and oxidation of soot from a diesel engine. Combustion of spray injected into a cylinder is complex phenomenon having physical and chemical processes, and these processes affect each other. There are many factors in the mechanism of the formation and oxidization of soot and it is necessary to observe spray combustion microscopically. In order to observe with that view, free fuel droplet array was used as an experimental object and the droplet array was injected into an atmospheric combustion chamber with high temperature. Ambient temperature of the combustion chamber, interdroplet spacing, and droplet diameter were selected as parameters, which affect the formation and oxidation of soot. In this study, it was found that the parameters also affect ignition delay of droplet. The ambient temperature especially affected the ignition delay of droplet as well as the flame temperature after self-ignition. As the interdroplet spacing that means the local equivalence ratio in a combustion chamber was narrow, formation of soot was increased. As diameter of droplet was large, surface area of the droplet was also broad, and hence evaporation of the droplet was more active than that of a droplet with relative small diameter.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.74-81
• /
• 2013

Due to its accuracy and efficiency, reduced kinetic mechanism of diesel surrogate is widely used as fuel model when applying 3-D diesel engine simulation. But for the well-developed prediction of diesel surrogate reduced kinetic mechanism, it is important to know some meaningful factors which affect to ignition delay time. Meanwhile, ignition delay time consists of two parts. One is the chemical ignition delay time related with the chemical reaction, and the other is the physical ignition delay time which is affected by physical behavior of the fuel droplet. Especially for chemical ignition delay time, chemical properties of each fuel were studied for a long time, but researches on their mixtures have not been done widely. So it is necessary to understand the chemical characteristics of their mixtures for more precise and detailed modeling of surrogate diesel oil. And it shows same ignition trend of paraffin mixture with those of single component, and shorter ignition delay at low/high initial temperature when mixing paraffin and toluene.

• Earthquakes and Structures
• /
• v.10 no.5
• /
• pp.1033-1048
• /
• 2016

An analytical solution based on the neutral surface concept is developed to study the free vibration behavior of simply supported functionally graded plate reposed on the elastic foundation by taking into account the effect of transverse shear deformations. No transversal shear correction factors are needed because a correct representation of the transversal shearing strain obtained by using a new refined shear deformation theory. The foundation is described by the Winkler-Pasternak model. The Young's modulus of the plate is assumed to vary continuously through the thickness according to a power law formulation, and the Poisson ratio is held constant. The equation of motion for FG rectangular plates resting on elastic foundation is obtained through Hamilton's principle. Numerical examples are provided to show the effect of foundation stiffness parameters presented for thick to thin plates and for various values of the gradient index, aspect and side to thickness ratio. It was found that the proposed theory predicts the fundamental frequencies very well with the ones available in literature.

• Smart Structures and Systems
• /
• v.4 no.3
• /
• pp.367-389
• /
• 2008

Shape Memory Alloys (SMAs) are unique materials with a paramount potential for various applications in bridges. The novelty of this material lies in its ability to undergo large deformations and return to its undeformed shape through stress removal (superelasticity) or heating (shape memory effect). In particular, Ni-Ti alloys have distinct thermomechanical properties including superelasticity, shape memory effect, and hysteretic damping. SMA along with sensing devices can be effectively used to construct smart Reinforced Concrete (RC) bridges that can detect and repair damage, and adapt to changes in the loading conditions. SMA can also be used to retrofit existing deficient bridges. This includes the use of external post-tensioning, dampers, isolators and/or restrainers. This paper critically examines the fundamental characteristics of SMA and available sensing devices emphasizing the factors that control their properties. Existing SMA models are discussed and the application of one of the models to analyze a bridge pier is presented. SMA applications in the construction of smart bridge structures are discussed. Future trends and methods to achieve smart bridges are also proposed.

• Architectural research
• /
• v.7 no.1
• /
• pp.49-54
• /
• 2005

Conventional studies have focused on the reduction in the water-cement ratio, the use of various admixtures, etc., to ensure the durability of reinforced concrete structures against such deterioration factors as carbonation and chloride attack. However, improvement in the concrete quality alone is not considered sufficient or realistic for meeting the recent demand for a service life of over 100 years. This study intends to improve the durability of reinforced concrete structures by improvement in the reinforcing steel, which has remained untouched due to cost problems, through subtle adjustment of the steel components to keep the cost low. As a fundamental study on the performance of Cr-bearing rebars in steel reinforced concrete structures exposed to corrosive environments, The test specimens were made by installing 8 types of rebars in concretes with a chloride ion content of 0.3, 0.6, 1.2, 2.4 and $24kg/m^3$. Corrosion accelerated curing were then conducted with them. The corrosion resistance of Cr-bearing rebars was examined by measuring crack widths, half-cell potential, corrosion area and weight loss after 155 cycles of corrosion-accelerating curing. The results of the study showed that the corrosion resistance increased as the Cr content increased regardless of the content of chloride ions, and that the Cr-bearing rebars with a Cr content of 5% and 9% showed high corrosion resistance in concretes with a chloride ion content of 1.2 and $2.4kg/m^3$, respectively.

• Environmental Analysis Health and Toxicology
• /
• v.6 no.3_4
• /
• pp.133-141
• /
• 1991

Vermistabilization is the stabilization of organic wastes using earthworms. The worms maintain aerobic conditions in the waste, accelerating and enhancing the biological decomposition of the waste. This study was carried out to find out fundamental factors affecting the performance of the process such as temperature, moisture content and pH condition of nightsoil sludge, and to evaluate the worms excreta (casting) as fertilizer. The results could be summarized as follows; the optimum range of temperature was observed 10~3$0^{\circ}C$ while survival rate of eathworm decreased rapidly at 35$^{\circ}C$ within 6 days and death occurred at 5$^{\circ}C$. Those of moisture content and pH condition were 50~70% and 5~8, respectively. Earthworms were revealed to change the composition of N in nightsoil sludge consisting of$NH_3$-N (71%), $NO_2$-N (2%) and $NO_3$-N (27%) into that $NH_3$-N (24%), $NO_2$-N (1%), $NO_3$-N (75%) in earthworm excreta, respectively The concentrations of NH$_3$and H$_2$S gas in pig manure were reduced by 59.2% and 45.2% in case of mixing pig manure with casting.