• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.13 no.1
• /
• pp.81-88
• /
• 2009

Purpose : To find out correlation between the Vocal indicators and the 'Buzhongyiqi-Tang questionnaire'. Method : The 'Buzhongyiqi-Tang questionnaire' is given to 83 healthy adults and collected their voice /a/ /e/ /i/ /o/ /u/. Analyze mean values of each factors of the Vocal indicators and the 'Buzhongyiqi-Tang questionnaire'. Conclusions : R square values of /i/ sound in factor 1 and factor 3 of 'Buzhongyiqi-Tang questionnaire' are noticeably high. The value of vocal diagnosis index F0, Fundamental Frequency, in Factor 1 and factor 3 of 'Buzhongyiqi-Tang questionnaire' are considerable. The research has shown conclusively that there is a link between The value of vocal diagnosis index F0 and Factor 3, lung deficiency factor, of 'Buzhongyiqi-Tang questionnaire'.

• Journal of Surface Science and Engineering
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2003

In general, the microstructure in thin films was known to evolve in similar manner according to the energy striking the condensing film at similar homologous temperature, Th for the materials of the same crystal structure. The fundamental factors affecting particle energy are a function of processing parameters such as working pressure, bias voltage, target/sputtering gas mass ratio, cathode shape, and substrate orientation. In this study, Al, Cu, Pt films of the same crystal structure of face centered cubic (FCC) have been prepared under various processing parameters. The influence of processing variables on the microstructures and residual stress states in the films has been studied.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.19-27
• /
• 1994

Mimosa and Quebracho are, in general, tanned with leather skin, finished silk fabrics according to temperature, treatment time, tannin concetration, pH, and studies that relation between tannin weighting and various factors. This makes fundamental study on characteristic of tannin treated fabrics. and the results are as fallows : 1. λ$_{max}$ was found at 278.5nm for Mimosa. 279.5nm for Quebracho. Also a stability was good in standing time and heating. 2. The higher tannin treatment temprature was, the better tannin weighting effect was. But they were slightly decreased at over 8$0^{\circ}C$, and K/S was slowly increased. 3. As tannin treatment time increased, tannin weighting effect increased but they were decreased at over 8$0^{\circ}C$, 90min. 4. As tannin concentration increased, tannin weighting was increased. 5. In tannin weighting effect according to various pH conditions, the it's best range of pH were 3.5~5.5 of Mimosa, 2.5~3.5 of Quebracho.o.

• Journal of the Korean Society for information Management
• /
• v.22 no.1 s.55
• /
• pp.5-20
• /
• 2005

This study aims at the fundamental factors needed to make the policy for internet reference service of public records were presented, considering the methods for improvement of internet reference service of national assembly records. For this purpose, reference service theory of recorded informations and examples of foreign congress reference services were analyzed. From the result of analysis, three tasks were proposed as an improvement plan for internet reference services of national assembly records: establishment of access policy, improvement of reference service programs, and activation of communication with users.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.362-369
• /
• 2008

In this study, we developed RBFN(Radial Basis Function Networks) based load modeling method with harmonic components. The developed method considers harmonic information as well as fundamental frequency and voltage considered as essential factors in conventional method. Thus, the proposed method makes it possible to effectively estimate load characteristics in power lines with harmonics. RBFN has some advantage such as simple structure and rapid computation ability compared with multi-layer perceptorn which is extensively applied for load modeling. To verify the effectiveness, the proposed method has been intensively tested with various dataset acquired under the different frequency and voltage and compared it with conventional methods such as polynomial method, MLPN and RBFN with no harmonic components.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.3
• /
• pp.35-42
• /
• 2008

The purpose of this study is to provide the fundamental materials for architectural planning of the Multipurpose Senior Center according to regional characteristics, and to analyze the Multipurpose Senior Center at the view of the program and utilization. For the analysis of the actual condition are surveyed 164 respondents und programs in four facilities in Deajeon. The results of this study are as follows; 1. the characteristics, problems and demands of the section of social education, the counseling, the medical rehabilitation, the sports education, etc. 2. the consideration factors for the planning of the program and volume of the Multipurpose Senior Center on the basic of the rate of increase in population of the Elderly in regions.

• Korean Institute of Interior Design Journal
• /
• no.5
• /
• pp.30-36
• /
• 1995

Light plays an important role in making a continuity of space and in determining the distinctive expression and char-acter of a space. Particularly, the introduction of natural light derives from our esthetic needs, as well as from the fundamental biologi-cal necessities of human beings. And also, adaptation to time and space is the vital factor of human survival and prosperity. Our visual recognition of light is usually formed not only by practical illumination but by analogy, expection and expe-rienced of lighting itself. As the forecase of natural light is (almost) impossible be-cause of variables such as changing weather, reflection rate of light and the patterns of shade, in designing the introduc-tion of daylight, there should be follow-ed careful considera-tion of the adaptation to such variety and the impet-us of light. The research was conducted to mane a contribution to cre-ate more rich and beautiful interior spaces by studying the characteristic of light which is one of the important factors of interior space design, and by inquiring the way to intro-duce light and its effect through the practical examples of Alvar Aalto, Le Corbusier and Louis I. Kahn.

• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.97-104
• /
• 1996

It is very important to obtain the knowledge of loads and flow patterns in most processes because these information are the fundamental data of die design and process design. The objective of present study is to investigate loads and metal flow patterns for various process conditions in flat die extrusion of square-bars from circular billets. For analyzing the metal flow patterns of the billets photo etching is used on sections of split specimen. From this method metal flow patterns are analyzed for various area reductions friction factors and punch stroke through the process from initial-stage to final-stage. Experiments are carried out with hard solder billets at room temperature.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.663-669
• /
• 2002

Electro-flotation (EF) has shown advantages, such as a high removal efficiency and easy control of bubble generation, over dissolved air flotation. However, the fundamental characteristics of the process have not been investigated in detail. According to recent modeling results from trajectory analysis, the size of the bubble is one of the most important factors that affect the efficiency of collision between bubble and particle. In this paper, the size characteristics of bubbles generated from EF under various conditions are measured using a new method for bubble size measurement, the Particle Counter Method (PCM). The size of the generated bubbles was found to be constant with respect to applied voltage but to vary with the electrode materials. These results and their implications are discussed.

• Asia pacific journal of information systems
• /
• v.16 no.3
• /
• pp.117-142
• /
• 2006

The purposes of this paper are to find out the characteristics of organizational members' cognitive structure for the effective acceptance of a six sigma innovative method in the organization. The author hypothesized the characteristics of individual cognitive structure is one of the most important factors on the acceptance of a six sigma method in the organizations for verifying through literature reviews, in-depth interviews and an analysis of questionnaire. This study is the first trial to corroborate the influence of characteristics of individual cognitive structure on the acceptance of a six sigma method. This can be utilized as an integrated appraisal model for the evaluation of acceptance of a six sigma method. The result not only helps the organizations that a six sigma method was recently introduced, to decrease the trial-and-errors experienced by the preceding groups, but can be used as fundamental data to establish an concrete strategy of a six sigma acceptance.