• Journal of Fashion Business
• /
• v.28 no.1
• /
• pp.113-130
• /
• 2024

A questionnaire survey of farmers engaged in actual farming was conducted to investigate the farmers' actual wearing conditions and preferences for agricultural workwear to develop workwear that is suitable for improved agricultural work efficiency. We extracted basic data necessary for the development of agricultural workwear. Analysis of the photographs taken showed differences in the shoes and gloves worn depending on the type of work. The percentages of men and women were equal among the agricultural workers. The age of the agricultural workers was analyzed and the results showed a higher percentage of those over 50 years old, indicating that the age of the agricultural workers was higher than in other industries. It was found that the waist, knees, and elbows of the workers were pulled during work, and analysis showed that the symptoms resulting from clothing pulling were more severe when the wearing dimensions were larger. It was recognized that the important aspects of workwear are those related to work, such as functionality, activity, and work efficiency. In addition to workwear, the most commonly worn auxiliary equipment was gloves, and other items included hats, armbands, work shoes, boots, seat chairs, and masks. When developing rural workwear, it is necessary to consider the fit, type of work, and materials of the workwear. Future research should focus on materials that can improve the functionality of workwear and pattern development that reflects physical and movement characteristics.

• PNF and Movement
• /
• v.21 no.3
• /
• pp.273-280
• /
• 2023

Objective: In patients with temporomandibular joint disorders, air insoles are used to investigate functionality and pain changes in the temporomandibular joint when walking in daily life. Intervention: Sixty-five patients with temporomandibular joint disorder were recruited: 34 as a control group who walked more than 7,000 steps a day in daily life, and 31 as an experimental group who were instructed to take at least 7,000 steps every day while wearing their air insoles. Measurements: To determine the effects of air insoles on temporomandibular joint pain, steady-state pain, maximum mouth opening, average pain, and the most severe pain were measured before and after the experiment. In addition, to evaluate functionality, the ability to open the mouth in a comfortable state, pain when opening the mouth, and the point of sound and maximum degree to which the mouth could be opened were evaluated before and after the experiment. Results: Pain, mouth openness, and sound points showed significant differences from the control group after the experiment, and the maximum mouth opening range showed no significant difference. Conclusion: When air insoles were used by patients with temporomandibular joint disorder, the functionality of the temporomandibular joint was improved and pain was decreased.

• Earthquakes and Structures
• /
• v.11 no.6
• /
• pp.967-982
• /
• 2016

Current codes design the buildings based on life safety criteria. In a performance-based design (PBD) approach, decisions are made based on demands, such as target displacement and performance of structure in use. This type of design prevents loss of life but does not limit damages or maintain functionality. As a newly developed method, resilience-based design (RBD) aims to maintain functionality of buildings and provide liveable conditions after strong ground movement. In this paper, the seismic performance of plain and strengthened RC frames (an eight-story and two low-rise) is evaluated. In order to evaluate earthquake performance of the frames, the performance points of the frames are calculated by the capacity spectrum method (CSM) of ATC-40. This method estimates earthquake-induced deformation of an inelastic system using a reduced response spectrum. Finally, the seismic performances of the frames are evaluated and the results are compared with a resilience-based design criterion.

• Journal of Sensor Science and Technology
• /
• v.10 no.1
• /
• pp.52-61
• /
• 2001

We propose a new saccadic eye movement system with visual selective attention. Saliency map models generate the scan pathways in a natural scene, of which the output makes an attended location. Saccadic eye movement model is used for producing the target trajectories to move the attended locations very rapidly. To categorize human saccadic eye movement, saccadic eye movement model was divided into three parts, each of which was then individually modeled using different neural networks to reflect a principal functionality of brain structures related with the saccadic eye movement in our brain. Based on the proposed saliency map models and the saccadic eye movement model, an active vision system using a CCD type camera and BLDC motor was developed and demonstrated with experimental results.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.63-64
• /
• 2006

The design concept of this dental clinic Interior design is emotional color expression for the medical facility. This dental clinic is showing off the new adoption of the Korean primary traditional color pallette for the medical interior design. The graphic wall of the corridor is strongly attracting the eyes of customers while wrapping the corridor wall and partition with rather unconventional primary colored graphic shaping a tooth. Also the vivid and the dynamic atmosphere are emphasized by using the red color in the treatment area and the powder room. For the space programing, I focused on the functionality of each space and the efficiency of the traffic line. Centering around the information desk, the principal traffic line Is divided Into the staffs' private movement and the public movement.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.107-120
• /
• 2023

The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing's allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.

• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.145-160
• /
• 2005

On the subjects of the female adults in their 20s who love to wear jeans, the wearing reality of basic jean pants and engineered jean pants was examined while pattern comparison and the evaluation of appearance and functions were made to reach the following conclusions: 1. Wearing reality of engineered jean pants Among the examined subjects, 74.8% were found out to favor engineered jean pants. Those who have engineered jean pants turned out to pursue well-known brands more than practicality. 2. Pattern comparison analysis of basic jean pants and engineered jean pants Though similar sizes existed in pants tips and belt width, engineered jean pants showed bigger values in waist circumference, crotch circumference, hip circumference, knee circumference, thigh circumference and so on. There were no big differences in the front part except for the items like crotch circumference and crotch length, but engineered jean pants had bigger sizes in the rear part. Engineered jeans in the rear contained the outward curved silhouette of the legs, curved tips, and a dart design instead of a back yoke. 3. Evaluation of appearance and functions In the scores of appearance, basic jean pants were higher at 3.65 in the order of front > side > back. On the contrary, engineered jean pants were excellent in the order of side > back > front. In the items of functions, engineered jean pants were higher at 4.23 in the order of hips > thighs> waist > abdomen > knee > crotch. On the other hand, basic jean pants showed the order of knee > crotch & thighs > abdomen > hips > waist. In every movement, engineered jean pants revealed higher functionality. In particular, the bigger physical movement led to the greater functional differences between the two kinds of jean pants.

• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.71-79
• /
• 2016

This study aims to suggest the proper neck-width of slim-fit jackets according to numbers of jacket buttons from an one-button jacket to a four button jacket for men in their 30's. The researchers carried out both an appearance evaluation and a movement functionality evaluation. When analyzing the appearance evaluation, there were meaningful differences. The one-button jacket showed a high score on the back-neck width of +2.4cm. The two-button jacket and the three button jacket showed a high score on the back-neck width of +1.4cm. The four-button jacket showed a high score on the back-neck width of +0.4cm. The result of movement functionality evaluation was not related to the appearance evaluation, and showed no meaningful difference. The one-button jacket and two button jacket showed high scores on the back-neck width of +2.4cm. The three button jacket showed a high score on the back-neck width of +1.4cm. The four-button jacket showed a high score on the back-neck width of +0.4cm. In analyzing both results, the study suggests that the proper front neck-width and that of the back-neck width of +2.4cm be for the one-button jacket, the back-neck width of +1.4cm be for the two-button jacket and the three-button jacket, while the back-neck width of +0.4cm be for the four-button jacket.

• The Research Journal of the Costume Culture
• /
• v.21 no.2
• /
• pp.261-271
• /
• 2013

This study aimed to identify professional climbers'demand for movement functionality in pants worn for rock climbing and ice climbing. Data were collected through in-depth interviews with 12 professional climbers using a semi-constructed questionnaire. The respondents were instructor-level experts whose climbing ability ranged from 5.9 to 5.14 on the Yosemite Decimal System rating scale. The research findings were as follows. Experts wore different climbing pants depending on the type of climbing. For example, they mostly wore high-stretch, second layer pants for rock climbing, while layering first layer, second layer, and third layer pants for ice climbing. There were gender differences regarding the parts of the body in which climbers reported the most discomfort when wearing climbing pants; male climbers most commonly responded 'knees', 'inner thighs' and 'hips' while their female counterparts most commonly responded 'inner thighs', 'exposed back and waist' and 'hips' in that order. Differences were found between rock climbing and ice climbing in terms of wear and tear on pants, preferred fabric properties, and length of pants. Wear and tear was found mainly on the hips and knees of rock climbing pants and on the inner lower hem of ice climbing pants. Listed in the order of preference, the most preferred fabric properties were elasticity, light weight, and durability for rock climbing pants and elasticity, insulation, and protection against water and wind for ice climbing pants. Regarding the length of rock climbing pants, respondents preferred ankle-length pants and cropped pants that did not cover the feet. For ice climbing pants, respondents favored heel-length pants that prevented pieces of ice from entering the clothing. Men showed a high level of preference for ergonomically cut climbing pants. Respondents said the waistband on climbing pants should be simplified so as not to adversely affect climbing maneuvers.

• The Research Journal of the Costume Culture
• /
• v.21 no.5
• /
• pp.755-764
• /
• 2013

This study intends to use the basic patterns in 3oz bodice and 2oz sleeve padded jackets made for women in their 20s to research the proper ease of 2oz bodice and 2oz sleeve, 4oz bodice and 3oz sleeve padded jackets. The study also proposes a method of designing padded jacket patterns according to padding thickness. The results of this study are as follows: The 2oz bodice and 2oz sleeve padded jackets had the following sizes. The front and back bust, waist, and hip circumferences were calculated as B/4+2.5cm and B/4+3cm, W/4+2.6+3.3(D)cm and W/4+1.5+2.6(D)cm, and H/4+2.8cm and H/4+3cm, respectively. The length of the jacket was 62.4cm, and the sleeve length was calculated as 63.4cm. For the 4oz bodice and 3oz sleeve padded jackets, the front and back bust, waist, and hip circumferences were calculated as B/4+4cm and B/4+4cm, W/4+4.1+3(D)cm and W/4+2.5+3.6(D)cm, and H/4+4.3cm and H/4+4cm, respectively. The length of the jacket was 63.2cm, and the sleeve length was calculated as 64.2cm. The results of this study showed that padded jackets with thicker padding need more ease. For jackets with stitches, the decreased lengths must be added in the pattern length. The 2oz bodice and 2oz sleeve, 4oz bodice and 3oz sleeve padded jackets all scored 4 points or higher in the movement functionality assessment, thus showing outstanding movement functionality.