• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.57-57
• /
• 2009

In this work, we carried out the variation of surface characteristics of organic polymer films by O2 plasma. The plasma diagnostics were performed by DLP(Double Langmuir Probe) and OES(Optical Emission Spectroscopy) measurements. Moreover, variation of surface characteristics were measured by AFM(Atomic Force Microscope), XPS(X-ray Photoelectron Spectroscopy), and contact angle goniometer. It was found that the etch rate of organic films was controlled by O radicals flux and dc bias voltage. And O radical density and dc bias voltage increased with increasing bias power. So, it was changed surface energy as a function of surface roughness and O/C ratio in organic films.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.552-557
• /
• 2013

Partially purified ${\alpha}$-galactosidase from Bacillus sp. LX-1 was non-covalently immobilized on a reversibly soluble-insoluble polymer, Eudragit L-100, and an immobilization efficiency of 0.93 was obtained. The optimum pH of the free and immobilized enzyme was 6.5 to 7.0 and 7.0, respectively, while there was no change in optimum temperature between the free and immobilized ${\alpha}$-galactosidase. The immobilized ${\alpha}$-galactosidase was reutilized six times without significant loss in activity. The immobilized enzyme showed good storage stability at $37^{\circ}C$, retaining about 50% of its initial activity even after 18 d at this temperature, while the free enzyme was completely inactivated. The immobilization of ${\alpha}$-galactosidase from Bacillus sp. LX-1 on Eudragit L-100 may be a promising strategy for removal of ${\alpha}$-galacto-oligosaccharides such as raffinose and stachyose from soybean meal and other legume in feed industry.

• Fashion & Textile Research Journal
• /
• v.10 no.2
• /
• pp.254-259
• /
• 2008

Poly(ethylene-co-vinylacetate)(EVA) microspheres were prepared by a thermally induced phase separation. The microsphere formation occurred by the nucleation and growth mechanism in the metastable region. The diluents used were toluene. The microsphere formation and growth was followed by the cloud point of the optical microscope measurement. The microsphere size, which was obtained by SEM observation and particle size analyzer, became decreased when the titanium dioxide($TiO_2$) concentration was higher. The deodorizing function of the prepared fabrics was studied by the determination of the decomposing capability for $NH_3$. The deodorant activity of these deodorizing fabrics was measured by chromogenic gas detector tubes. The deodorant activity of $NH_3$ increased with increasing $TiO_2$ concentration of EVA microsphere.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.269-274
• /
• 1995

For the screening of a new functional exopolysaccharide, sugar composition and rheological properties of exopolysaccharide produced from Xanthomonas sp. EPS-1 were investigated. The average molecular weight of exopolysaccharide was determined to be approximately 2.l $\times$ 10$^{6}$ dalton. The new exopolysaccharide EPS-1 was composed of mannose, glucose, galactose and gluco- samine. IR analysis showed that the exopolysaccharide EPS-1 was assumed to be polymer with carbohydrates. NMR analysis showed that exopolysaccharide EPS-1 was presumed to be 4 units of sugar and trace of CH$_{3}$ group. Exopolysaccharide EPS-1 solution showed a characteristic of non-Newtonian fluid properties. At the concentration of 1.0%, the consistency index and the flow behavior index were shown at 10.8352 poise-sec and 0.4419, respectively. All dispersions were pseudoplastic fluids described accurately by Power-law model. Exopolysaccharide EPS-1 was highly viscous at low concentration, with good stability over a wide range of pH 5 to 13. The excellent compatibility of exopolysaccharide EPS-1 was represented with salts such as sodium chloride.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.259-265
• /
• 2002

The cure kinetics of blends of epoxy (DGEBA, diglycidyl ether of bisphenol A)/anhydride resin with polyamide copolymer, poly(dimmer acid-co-alkyl polyamine), were studied using differential scanning calorimetry (DSC) under isothermal condition. On increasing the amount of polyamide copolymer in the blends, the reaction rate was increased and the final cure conversion was decreased. Lower values of final cure conversions in the epoxy/(polyamide copolymer) blends indicate that polyamide hinders the cure reaction between the epoxy and the curing agent. The value of the reaction order, m, for the initial autocatalytic reaction was not affected by blending polyamide copolymer with epoxy resin, and the value was approximately 1.3, whereas the reaction order, n, for the general n-th order of reaction was increased by increasing the amount of polyamide copolymer in the blends, and the value increased from 1.6 to 4.0. A diffusion-controlled reaction was observed as the cure conversion increased and the rate equation was successfully analyzed by incorporating the diffusion control term for the epoxy/anhydride/(polyamide copolymer) blends. Complete miscibility was observed in the uncured blends of epoxy/(polyamide copolymer) up to 120 $^{\circ}C$, but phase separations occurred in the early stages of the curing process at higher temperatures than 120 "C. During the curing process, the cure reaction involving the functional group in polyamide copolymer was detected on a DSC thermogram.gram.

• Korean Membrane Journal
• /
• v.8 no.1
• /
• pp.67-73
• /
• 2006

Transparent materials are well known but preparation of transparent poly 2-hydroxyethyl methacrylate {poly (HEMA)} material by varying solvent is a new one and economically reliable. This material is prepared from hydroxyl based monomer HEMA by radical polymerization using benzoyl peroxide (BPO) as initiator and isobutanol, 2-butanol, 1-butanol, hexane and toluene as a solvent. The reaction temperature, time and stirring speed were set at $70^{\circ}C$, 4 hrs and 150 rpm, respectively. The polymer was characterized for functional group by IR spectroscopy. It was observed that the intensity of band at $1637 cm^{-1}$ a characteristic band of C=C stretching disappeared indicating that it was completely consumed after polymerization. It was observed that swelling percentage increases with increase as time passes but after a certain time a constant swelling percentage is achieved. SEM pictures reveals that poly (HEMA) prepared by different solvent shows pore with a distinguishable void up to several micrometers. The BET surface area, cumulative pore volume and average pore diameter is greater in poly (HEMA) prepared by hexane as a solvent compared to other solvents. Poly (HEMA) prepared by 1-butanol as a solvent shows higher glass transition temperature compared to other solvents. Poly (HEMA) prepared by different solvents shows $90{\sim}94%$ light transmission property from light transmission measurement and looks transparent.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.55-56
• /
• 1994

There has been many attempts to improve the membrane performance using pervaporation processes[l-3]. They are 1) blending polymer with the high flux and one with high selectivity, 2) an incorporation of functional groups interacting with permeants into a membrane through copolymerization or modification, 3) composite membrane or asymmetric membrane structure with a thin skin layer which acts as a selective layer. Among them, a polymeric membrane containing ion complex group receives an extensive attention recently because ionic complex is known to activate the water transport through ion-dipole interaction. It is especially advantageous in the separation of organic-water system. We applied the ideas of the activation of water transport through ion-dipole. We have reported on the in-sire complex membrane to separate water from aqueous aceiic acid and pyridme solution[4-5] based on the simple acid-base theory. Water transport was enhanced through in-situ complex between pyridine moiety in the membrane and the incoming acetic acid in the feed. In this case, catalytic transport mechanism was proposed. In the present study we used pyridine solution as a feed and the sulfonic acid group in the membrane.

• Textile Coloration and Finishing
• /
• v.25 no.2
• /
• pp.118-125
• /
• 2013

Poly(vinyl alcohol) (PVA)/titanium dioxide ($TiO_2$) composite nanofibers were produced at different $TiO_2$ concentrations (0.5, 1 and 1.5 wt.%) using the electrospinning method. The parameters of electrospinning including polymer contents, voltage and tip-to-collector distance (TCD) were optimized for fabrication process. The study showed that 7.5 wt.% PVA, 15 kV applied voltage and 15 cm TCD are the best condition to obtain uniform PVA/$TiO_2$ nanofibers. $TiO_2$ nanoparticles give significant effect in fiber morphology. $TiO_2$ content increases the diameter of the fibers and roughen the fiber surfaces. The PVA/$TiO_2$ nanofibers were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD).

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.57-64
• /
• 2004

This is the study for the removal of a toxic heavy metal ions and the recycling of expanded polystyrene wastes. Thus expanded polystyrene wastes collected from the packing materials of TV or chemicals and dissolved by $80wt.\%$ solvent(N, N-Dimethylacrylamide), electrospun in DC 20kV by power supply. Generally, the electrospinning is a process of manufacture to the fibers of nanosize from polymer solution. Manufactured nanofiber mats by electrospinning were sulfonated by cone.-sulphuric acid with $Ag_2S_O_4$ catalysts for the exchange capacity of heavy metal ions and the properties of structure with sulfonated time investigated by FESEM(Feild Emission Scaning Electron Microscope). The ion exchange capacity of light metal$(Na^+)$, Cd(II) and Ni(II), and by a nanofiber mats were 1.94[mmo1/g-dry-mat), 1.72(mmol/g-dry-mat), 1.24(mmol/g-dry-mat), respectively., and water uptake content showed a similar trend with IEC. and The selectivity coefficients $K^M_H$ of Cd(II), Ni((II) ions showed 0.324, 0.228. respectively.

• Macromolecular Research
• /
• v.11 no.2
• /
• pp.122-127
• /
• 2003

A glass-like carbon was fabricated using furan resin. The influence of heat treatment temperature during fabrication process on the chemical and micro-structural changes was studied by various analytical and spectroscopic methods including TGA, FT-IR, CHN, TEM and XRD. The chemical resistance properties of the fabricated glass-like carbon were also investigated. It has been found that the heat-treated samples at higher temperature up to 2600 $^{\circ}C$ in $N_2$ atmosphere had little weight loss, small amounts of functional groups, and high carbon content. The fabricated glass-like carbons upon heat treatment at 2600 $^{\circ}C$ showed an amorphous stage without any grain growth and/or reconstruction of structure. The glass-like carbon had much better chemical resistance than the artificial graphite, and exhibited a high chemical resistance due to its low surface areas, minimum impurities, and low graphite crystallites.