• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3327-3332
• /
• 2010

We investigated the effects of newly synthesized 4-[(butylsulfinyl)methyl]-1,2-benzenediol (SMBD) on the prevention of atherosclerosis in hypercholesterolemic rabbits. SMBD exhibited stronger inhibition of $Cu^{2+}$-induced low-density lipoprotein oxidation than that of ascorbic acid or simvastatin. Three-month-old rabbits were fed an atherogenic diet containing 0.5% cholesterol and 10% coconut oil, while other two groups were given an atherogenic diet with intravenous injection of either simvastatin or SMBD (0.33 mg/kg/day) for 4 weeks. The concentrations of plasma cholesterol and thiobarbituric acid reactive substances were significantly decreased in SMBD groups, compared to the control group. Also, aortic lipid level in the SMBD group significantly lower than that in the control group. Furthermore, compared with the control group, the SMBD group significantly inhibited the increase of aortic intimal thickness by 36% via reducing of aortic reactive oxygen species and cyclooxygenase-2 protein levels. We conclude that raised antioxidant effect of SMBD results in significant prevention against hypercholesterolemia.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.3
• /
• pp.265-273
• /
• 2016

The effects of surface modification by nitric acid on the pre-treatment of electroless copper plating were investigated. Copper was electroless-plated on the nitric acid treated graphite activated by a two-step pre-treatment process (sensitization + activation). The chemical state and relative quantities of the various surface species were determined by X-ray photoelectron spectroscopy (XPS) after nitric acid modification or pre-treatment. The acid treatment increased the surface roughness of the graphite due to deep and fine pores and introduced the oxygen-containing functional groups (-COOH and O-C=O) on the surface of graphite. In the pre-treatment step, the high roughness and many functional groups on the nitric acid treated graphite promoted the adsorption of Sn and Pd ions, leading to the uniform adsorption of catalyst ($Pd^0$) for Cu deposition. In the early stage of electroless plating, a lot of tiny copper particles were formed on the whole surface of acid treated graphite and then homogeneous copper film with low variation in thickness was formed after 30 min.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• Carbon letters
• /
• v.16 no.2
• /
• pp.93-100
• /
• 2015

Surface modified carbon felts were utilized as an electrode for the removal of inorganic ions from seawater. The surfaces of the carbon felts were chemically modified by alkaline and acidic solutions, respectively. The potassium hydroxide (KOH) modified carbon felt exhibited high Brunauer-Emmett-Teller (BET) surface areas and large pore volume, and oxygen-containing functional groups were increased during KOH chemical modification. However, the BET surface area significantly decreased by nitric acid ($HNO_3$) chemical modification due to severe chemical dissolution of the pore structure. The capability of electrosorption by an electrical double-layer and the efficiency of capacitive deionization (CDI) thus showed the greatest enhancement by chemical KOH modification due to the appropriate increase of carboxyl and hydroxyl functional groups and the enlargement of the specific surface area.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.740-746
• /
• 2002

In this study, the polycarbonate surface was treated by $O_2$/ Ar gases plasma for the enhancement of adhesion with Cu electrode. From the point of view of hydrophilicity and the functionality, the micro-roughness, new functional groups and oxygen content of the polycarbonate surface were increased by the $O_2$/ Ar gases plasma treatment. The Cu films deposited on the as-received polycarbonate were easily detached while, after the$ O_2$/ Ar gases plasma treatment the adhesive Cu films on polycarbonate could be obtained. These results can be explained that the polycarbonate had a hydrophilic surface with uniform micro-roughness and new functional groups by $O_2$/ Ar gases plasma treatment. Therefore,$O_2$/ Ar gases plasma treatment is a promising method for improvement of adhesion between polycarbonate and Cu electrode.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.104-108
• /
• 2013

The adsorption characteristics of Cd(II) and Pb(II) in aqueous solution using granular activated carbon (GAC), activated carbon fiber (ACF), modified ACF (NaACF), and a mixture of GAC and NaACF (GAC/NaACF) have been studied. The surface properties, such as morphology, surface functional groups, and composition of various adsorbents were determined using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) measurements. The specific surface area, total pore volume, and pore size distribution were investigated using nitrogen adsorption, Brunauer-Emmett-Teller (BET), and Barrett-Joyner-Halenda (BJH) methods. In this study, NaACF showed a high adsorption capacity and rate for heavy metal ions due to the improvement of its ion-exchange capabilities by additional oxygen functional groups. Moreover, the GAC and NaACF mixture was used as an adsorbent to determine the adsorbent-adsorbate interaction in the presence of two competitive adsorbents.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.1
• /
• pp.43-54
• /
• 2020

PURPOSE: This study examined the effects of mild-intensity exercise (MIE) and high-intensity interval exercise (HIIE) on the recovery of the motor function over time in sciatic nerve crush injury rats. METHODS: The MIE group ran on a treadmill at a speed of 8.3 m/min to perform low-intensity training with maximum oxygen uptakes ranging from 40 to 50%. The HIIE group ran on the treadmill at a speed of 25 m/min to perform high-intensity training with a maximum oxygen uptake of 80%. The interval training was performed based on a 1:1 work-to-rest ratio. The effects of each form of exercise on the rats' walking abilities following their recovery from the peripheral nerve injuries were evaluated based on the results of behavior tests performed at one and 14 days. RESULTS: According to the test results, the MIE group showed significant improvements in the rats' ankle angle in the initial stance phase, and in the ankle and knee angles in the toe-off phase (p<.05). The HIIE group exhibited significant improvements in the ankle and knee angles in the initial stance phase, SFI(p<.05). CONCLUSION: The state of such patients can be improved by applying the results of this study in that MIE and HIIE on a treadmill can contribute to the recovery of the peripheral nerve and motor skill. In particular, MIE is used as a walking functional training in the toe-off stance phase, while HIIE is suitable in the initial stance stage.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.2
• /
• pp.124-135
• /
• 2012

Purpose : The objective of this study was to investigate the differences of hippocampal volume and shape as well as the functional change between long life experienced taxi drivers and controls of Korean population. Materials and Methods: Three-dimensional T1-weighted images and blood oxygen level dependent functional MRI(fMRI) were obtained from 8 subjects, consisting of 4 experienced (20-30 years) taxi drivers and 4 age-matched controls. The hippocampal volume and shape were analyzed with three-dimensional T1-weighted images. In addition, neuronal activities of brain were analyzed using a blood oxygen level dependent fMRI between the two groups. Results: The hippocampal volume showed no statistically significant difference between the two groups (p > 0.05). The left hippocampi of the taxi drivers were slightly elongated with larger head and tail portions than those of the controls (p < 0.05, uncorrected). For the functional MRI, fusiform gyrus was specifically activated in taxi drivers, compared with the control group. Conclusion: The structural and functional changes of taxi driver's hippocampus indicate the functional differentiation as a result of occupational dependence on spatial navigation. In other words, the continuous usage of spatial navigation performance may diminish degeneration of hippocampus and the related brain regions.

• Journal of Chest Surgery
• /
• v.24 no.4
• /
• pp.331-337
• /
• 1991

Recent experimental work indicates latamoxef sodium used as a broadspectrum antibiotics generates oxygen-free radicals. The present study represents an attempt to investigate whether reperfusate containing Shiomarin[85% latamoxef sodium+15% mannitol] might decrease the post-ischemic recovery of cardiac function. In the investigation, twelve isolated rat hearts were subjected to 270 minutes of cold total global ischemia. After the cold total global ischemia, six hearts[KHB group] were reperfused with Krebs-Henseleit buffer solution and the other six hearts[LMS group] with Krebs-Henseleit buffer solution containing latamoxef sodium[200ug /L]. Postischemic recovery rate of heart rate, aortic systolic pressure, aortic flow, coronary flow and cardiac output at 20 minutes reperfusion was 100.66$\pm$10.38, 85.25$\pm$7.61, 78.95$\pm$6. 02, 78.85$\pm$8.86 and 79.11$\pm$6.54 percent respectively in the KHB group and 97.96$\pm$4.19, 87. 72$\pm$4.37, 81.74$\pm$6.80, 82.69$\pm$10.01 and 81.90$\pm$6.67 percent respectively in the LMS group. The hemodynamic data revealed no significant difference in the post-ischemic recovery rate of the two groups. This finding suggests that reperfusate containing Shiomarin[latamoxef sodium, 200ug /L] does not affect the cardiac functional recovery after cold total global ischemia.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.200-205
• /
• 1997

Surface of polyethylene film was modified by ion assisted reaction in which ion beam is irradiated on polymer in reactive gas environments. Ion (argon and oxygen) beam energy was 1 keV, doses were varied from $1{\times}10^{14}$ to $1{\times}10^{17}$ inons/ $\textrm{cm}^2$, and amount of blowing oxygen from 0 to 4 sccm(ml/min). Wettability was measured by water contact angle measurement, and the surface functionality was analyzed by x-ray photoelectron spectroscopy. The contact angles of water to polyethylene modified by oxygen ion beam only decrease from 95 to degrees, and surface energy was not changed much. The contact angles remarkably decrease to 28 degrees and surface energy increase to 67 erg/ $\textrm{cm}^2$ when the films were modified by argon ion with various ion doses with blowing oxygen gases near the polyethylene surface. Improvement of wettability and surface energy are mainly due to the new functional group formation such as C-O or C=O, which are known as hydrophilic groups from the XPS analysis, and the assisted reaction is very effective to attach oxygen atoms to form functional groups on C-C bond chains of polyethylene.