• 한국진공학회지
• /
• 제8권3B호
• /
• pp.262-268
• /
• 1999

Polycarbonate (PC) and Polymethylmethacrylate (PMMA) surface was modified by ion assisted reaction (IAR) technique to obtain the hydrophilic functional groups and improve the wettability. In conditions of ion assisted reaction, ion beam energy was changed from 500 to 1500eV, and ion dose and oxygen gas blown rate were fixed $1\times10^{16}$ ions/$\textrm{cm}^2$ and 4ml/min, respectively. Wetting angle of water on PC and PMMA surface modified by $Ar^+$ ion without blowing oxygen at 4ml/mon showed $5^{\circ}$ and $10^{\circ}$. Changes of wetting angle with oxygen gas and $Ar^+$ ion irradiation were explained by considering formation of hydrophilic group due to a reaction between irradiated polymer chain by energetic ion irradiation and blown oxygen gas. X-ray photoelectron spectroscopy analysis shows that hydrophilic groups such as -C-O, -(C=O)- and -(C=O)-O- are formed on the surface of polymer by chemical interaction. The polymer surface modification using ion assisted reaction only changed the surface physical properties and sept the bulk properties. In comparison with other modification methods, the surface modification by IAR treatment was chemically stable and enhanced the adhesion between metal and polymer surface. The applications of various kinds of polymer surface modification methods, metal and polymer surface. The applications of various kinds of polymer surface modification could be appled to the new materials about hydrophilic surface properties by IAR treatment. The adhesion between metal film and polymer measured by Scotch tape test whether the hydrophilic surfaces could improve the adhesion strength or not.

• 산업공학
• /
• 제11권2호
• /
• pp.211-225
• /
• 1998

As mentioned in Part I all groupware products have been categorized into three areas which include cooperation/document management systems(CMS), collaborative writing systems(CWS), and decision-making/meeting system(DMS). This study deals with a comparative analysis of the last two areas, which is added to the first. It turns out that DMS has a higher market share than CWS. However. since effective collaboration requires the functions inherent to these two systems. they should be integrated somehow. The systems' functions that have been implemented in response to design issues have been described. Each group of the functions has been divided into three parts which consist of basic function, quasi-basic function. and others. Such a decision has been made according to the frequency rate of the functions provided in the products. While the basic functions in CWS include collaboraive writing beyond restriction of time and place, group awareness. version control. and others, in DMS realtime collaboration. brainstorming. presentation. various task support. policy formation. document management, multimedia, subgroup communication. topic commenter, categorizer, screen capture and various rile transfer. The basic functions are merged into the integrated functional model which was proposed in Part I. Since the model is so flexible that it can partially include the quasi-functions in addition to the hasic functions. a large number of products may stem from the modification of the functional model.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제28권6호
• /
• pp.16-23
• /
• 2023

Heavy metal (Zinc, Cadmium, Lead) adsorption onto surface modified activated carbon was performed in order to better understand the effect of sodium ion addition to activated carbon. Surface modification methods in this research included water washing, nitric acid washing, and sodium addition after nitric acid washing. These surface modifications generated oxygen functional groups with sodium ions on the surface of the activated carbon.. This caused the change of the specific surface area as well as in the ratio of the carboxyl groups. Heavy metal adsorption onto sodium-containing activated carbon was the most among the three modifications. After the adsorption of heavy metals, the carboxyl group ratio decreased and sodium ions on the surface of the activated carbon were almost non-existent after the adsorption of heavy metals onto sodium-containing activated carbon. The results from this research indicated that ion exchange with sodium ions in carboxyl groups effectively improved heavy metal adsorption rather than electrostatic adsorption and hydrogen ion exchange.

• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• 대한화학회지
• /
• 제54권4호
• /
• pp.443-446
• /
• 2010

기능성식품으로 시판되는 건강음료를 HPLC 분석한 결과 발기부전치료제로 허가받은 비아그라$^{(R)}$의 활성주성분인 실데나필과 구조적으로 유사한 부정첨가물질이 발견되었다. 이 부정첨가물질의 구조를 규명하기 위해 건강음료를 methylene chloride로 추출한 다음 그 추출물을 semipreparative HPLC로 정제하였다. 분리된 물질의 화학구조는 IR, LC/MS-ESI, NMR 분광학으로 규명하였는데 실데나필과 유사한 특징을 보였고 구조상의 유일한 차이는 실데나필의 methylpiperazine 부분구조를 부정첨가물질에서 hydroxyethylpiperazine으로 치환한 것이었다.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.740-746
• /
• 2002

In this study, the polycarbonate surface was treated by $O_2$/ Ar gases plasma for the enhancement of adhesion with Cu electrode. From the point of view of hydrophilicity and the functionality, the micro-roughness, new functional groups and oxygen content of the polycarbonate surface were increased by the $O_2$/ Ar gases plasma treatment. The Cu films deposited on the as-received polycarbonate were easily detached while, after the$ O_2$/ Ar gases plasma treatment the adhesive Cu films on polycarbonate could be obtained. These results can be explained that the polycarbonate had a hydrophilic surface with uniform micro-roughness and new functional groups by $O_2$/ Ar gases plasma treatment. Therefore,$O_2$/ Ar gases plasma treatment is a promising method for improvement of adhesion between polycarbonate and Cu electrode.

• 한국환경과학회지
• /
• 제32권6호
• /
• pp.477-482
• /
• 2023

Halloysite nanotube (HNT) has a nanotube structure with the chemical formula of Al₂Si₂O₅(OH)₄ · nH₂O and is a natural sediment of aluminosilicate. A lot of research has been conducted to improve the mechanical properties of epoxy composites by generating interactions between HNTs and polymers through surface treatment of HNTs, such as exchange of amine group as a terminal functional group. However, most of the surface modification methods are performed under wet conditions, which require a relatively large amount of time, manpower and solvent. In order to save time and simplify complicated procedures, a dry coating machine was designed and used for amine group exchange. Comparing the XPS results, it was found that the results of NH₂-HNT prepared using a dry coating machine and the substitution through the wet method were not significantly different, and it has been confirmed that the amount of solvent used and the time savings can be made.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.271-275
• /
• 2007

γ -Glutamyl transpeptidase (EC 2.3.2.2) plays a key role in glutathione metabolism by catalyzing the transfer of the γ -glutamyl residue and hydrolysis of glutathione. The functional residues at the active site of the rat kidney γ -glutamyl transpeptidase were investigated by kinetic studies at various pH, the treatment of diethylpyrocarbonate (DEPC), and photooxidation in presence of methylene blue. An ionizable group affecting the enzymatic activity with an apparent pKa value of 7.1, which is in the range of pKa values for a histidine residue in protein, was obtained by examining the pH-dependence of kinetic parameters. The pH effect on the photoinduced inactivation rate of the enzyme corresponds to that expected for the photooxidation of the free histidine. The involvement of a histidine in the catalytic site of the enzyme was further supported by DEPC modification accompanied by an increase in absorbance at 240 nm, indicating the formation of Ncarbethoxyhistidine. The histidine located at the position of 382 in the precursor of the enzyme is primarily suspected based on the amino acid sequence alignment of the transpeptidases from various organisms.

• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.131-138
• /
• 2023

The carbon felt is usually hired as electrodes for vanadium redox flow battery (VRFB). In the study, surface modification of carbon felt under CO₂ atmosphere with variables of operating various temperature ranges between 700℃ and 900℃. The qualitative and quantitative analysis were carried out such as scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) to observe degree of surface modification. Result of XPS analysis confirmed increase of carbon and oxidation functional group on the surface with increase of temperature. SEM image was discovered similar phenomena. Electrochemical characteristics such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) revealed the improved electrode performance with increase of temperature. However, the electrochemical performance under treatments temperature of 900℃ was less than that of under treatment temperature of 850℃ due to weight loss at the treatment temperature of 900℃. From the CV and EIS results, the best electrochemical characteristics was at the temperature of 850℃. That of at the temperature of 900℃ was decreased due to weight loss. The energy efficiencies (EE) obtained from full cell test were 69.37, 80.76, 82.45, and 75.47%, at the temperature of 700, 800, 850, and 900℃, respectively.

• 한국환경농학회지
• /
• 제17권3호
• /
• pp.246-253
• /
• 1998

광산폐수, 산업폐수등으로 부터 Cd, Pb, Zn 및 Cu 등의 중금속에 강한 내성을 지니고 있을 뿐만 아니라 균체내 중금속 축적능력이 우수한 중금속 내성 미생물 균주 Pseudomonas putida, P. aeruginosa, P. chlororaphis 및 P. stutzeri를 각각 분리하여, 화학적인 방법으로 세포내 functional group들의 전하를 인위적으로 변형시켜 변형시키기 전과의 중금속 결합능력을 비교 조사한 결과는 다음과 같다. 화학적인 방법으로 functional group의 charge를 변형시킨 cell wall들에 의한 중금속 축적변화를 조사한 결과, cell wall중 amine group을 변형시켰을 경우에는 중금속 축적율이 변형시키지 않은 cell wall에 비하여 약간 증가되었거나 거의 비슷한 축적율을 나타내었으나, carboxyl group을 변형시켰을 경우에는 매우 크게 감소되었다. 이와같은 결과는 functional group을 변형시킨 cell wall의 외형적인 중금속 축적형태를 전자현미경으로 관찰하였을 경우에도 명확하게 나타났으며, 따라서, carboxyl기는 중요한 중금속 binding site인 것으로 판단되었다.