• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.54-60
• /
• 2001

This paper investigates the equivalent circuit analysis method for the multi-functional device in mobile telephones, which works both as a buzzer and a vibrator in a single unit form. With a representative multi-functional device, we construct the corresponding equivalent circuits for the buzzer mode and the vibrator mode of the device, respectively, and analyze the performance of each of the modes. For proper construction of the circuit, we analyze the structure and operation mechanism of the device, and develop a computer simulation tool to simulate the behavior of the device. Validity of the analysis method is verified through comparison of the analysis results with experimental measurement results, which shows good agreement between the two sets of data.

• The Journal of Society for e-Business Studies
• /
• v.2 no.2
• /
• pp.89-113
• /
• 1997

Modeling methodology has been widely used for analysis and design of a information system. Specially, under the CALS environments, modeling approach is more important because the enterprise functions are inter-related and information sharing speeds up the business. In this paper, we suggest functional requirements about modeling methodology for CALS by surveying the IDEF0 and ARIS. The former is FIPS 183 and the latter is basic methodology of SAP/R3 which is world-wide ERP system. The proposed functional requirements include all semantics of IDEF0 and adds some features. The first is adding modeling components which are semantic representations. In addition to ICOMs, we add the time and cost component which is required to execute the function. The second is tracing mechanism. When we need some information, we drive the functions related with the information by reverse tracing of the function which produces the information as a output and input. Through the tracing, we find out the bottleneck process or high cost process. This approach guarantees the integrity of data by designating the data ownership. Finally, we suggest the final decomposition level. We call the final decomposed function into unit function which has only one output data. We can combine and reconstruct some of functions such as 'lego block' combination.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.399-414
• /
• 2004

In this paper, an evolution of software reliability engineering in a large-scale software project is summarized. The considered software consists of many components, called functional blocks in software of switching system. These functional blocks are served as the unit of coding and test, and the software is continuously updated by adding new functional blocks. We are mainly concerned with the analysis of the effects of these software components in software reliability and reliability evolution. We analyze the static characteristics of the software related to software reliability using collected failure data during system test. We also discussed a pattern which represents a local and global growth of the software reliability as version evolves. To find the pattern of system software, we apply the S-shaped model to a collection of failure data sets of each evolutionary version and the Goel-Okumoto(G-O) model to a grouped overall failure data set. We expect this pattern analysis will be helpful to plan and manage necessary human/resources fur a new similar software project which is developed under the same developing circumstances by estimating the total software failures with respect to its size and time.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.146-153
• /
• 2011

The purpose of this study was to analyze the type of extended-balcony floor plan which has been reflected as a various forms after making amendment to the apartment extended-balcony legislation on December 2005 and to understand the design tendency of housing unit plan and the characteristic of living space planning by the type of size(pyeong) and extension. The objects of analysis and the plans are 333 example(235 of $84m^2$, 98 of $59m^2$) from the LH corporation competition. The design tendency of balcony space after extension is as follows; First, a type of extension for simple area to increase the area of room adjacent to balcony through balcony extension. Second, a type of functional reinforcement for private room to separate the mixed function followed by strengthening the individual function of the private room. Third, a type of ${\alpha}$-room to play new functions as hobby room, study room, soho-type room with working from home by extending balcony. Fourth, a integrated type to increase flexible efficiency of bed room, living room and kitchen by integrating extended-balcony from the flexible plan. Along with the evaluation of living style through user's environment-behavior research and the counterplan for evacuation space, indoor thermal environment and space for fulfilling the original function of balcony should be proposed in the future study.

• Journal of the Korean housing association
• /
• v.25 no.1
• /
• pp.81-90
• /
• 2014

As an emerging market in central Asia, Kazakhstan's housing market is witnessing increasing demands. Though Korean construction industries have attempted to take advantage of this opportunity, inadequate understanding of the local living demands have kept the industries from successfully establishing themselves in the foreign context. The goal of this research is to derive architectural planning implications regarding the living demands by investigating changes being made to the housing structure. By analyzing 11 apartment unit plans, it was found that Kazakhs had a living demand for more spacious living rooms and functional spaces. In the effort to improve the livingroom environment and usability such as enlarging the livingroom, removing the living room wall for open space or expanding the inner space facing outside is understood that the living room is considered as an important space. The fact that spaces such as dress rooms and utility rooms are being added in the housing market, reflects the demand of functional spaces. These demands are considered as the reflection of the traditional life style of nomad culture and the cold local climate. Therefore, it can be said that the apartment unit plans distributed in the Korean housing market are quite compatible with the Kazakh housing market since they offer spatious living rooms, while the latter founding implies the changes that ought to be made for a successful establishment in the foreign market.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.4 no.1
• /
• pp.27-38
• /
• 2006

This study analyzed changes in action potential of supraspinal neuron and motor unit depending on maximum tolerance isometric contraction(MTIC) by electrical stimulation and examined influence of functional electrical stimulation (FES) on spinal neuron adaptation. It selected 40 university students in their twenties and divided into experimental groups of 25% MTIC(I), 50% MTIC I (II), 75% MTIC(III) and 100% MTIC(IV) depending on MTIC by electrical stimulation, and performed isometric contraction of plantar flexor muscle to each experimental group with given contraction for 20 times. It measured V/Mmax and MDF pre and post exercise, compared volume of contraction. 1. V/Mmax ratio showed no significant difference in comparison among experimental groups. 2. There was significant difference in median frequency of gastrocnemius and soleus in action potential motor unit according to comparison among experimental groups(p<.001). When contraction by electrical stimulation was maximum, change was greatest. This results suggest that muscle contraction by electrical stimulation was influence to action potential of spinal motor neuron system which appear optimal level though aspect and difference degree were not in accordance. Consequently, optimal stimulation level of MTIC(50%) by FES would be lead to central nerve adaptation. muscle contraction by electrical stimulation was influence highly to MDF which should be consider to fatigue of motor unit for muscle contraction by electrical stimulation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2245-2250
• /
• 2014

A new accepter unit, 6,7-difluoro-2,3-dihexylquinoxaline, was prepared and utilized for the synthesis of the conjugated polymers containing electron donor-acceptor pair for OPVs. New series of copolymers with dioctyloxybenzodithiophene as the electron rich unit and 6,7-difluoro-2,3-dihexylquinoxaline as the electron deficient unit are synthesized. The solid films of poly[2,6-(4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene)-alt-5,8-(6,7-difluoro-2,3-dihexylquinoxaline)] (PBQxF) and poly[2,6-(4,8-bis(2-ethylhexyloxy) benzo[1,2-b:4,5-b']dithiophene)-alt-5,8-(6,7-difluoro-2,3-dihexyl-5,8-di(thiophen-2-yl) quinoxaline)] (PBDTQxF) show absorption bands with maximum peaks at about 599 and 551 nm and the absorption onsets at 692 and 713 nm, corresponding to band gaps of 1.79 and 1.74 eV, respectively. The devices comprising PBQxF with $PC_{71}BM$ (1:2) showed open-circuit voltage ($V_{OC}$) of 0.64 V, short-circuit current density ($J_{SC}$) of $1.58mA/cm^2$, and fill factor (FF) of 0.39, giving power conversion efficiency (PCE) of 0.39%. To obtain absorption in the longer wavelength region, thiophene units without any alkyl group are incorporated as one of the monomers in PBDTQxF, which may result in low solubility of the polymers to lead lower efficiency.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.520-524
• /
• 2011

The properties of manufactured SOFC unit cell using decalcomania method were investigated. The decalcomania method that used in ceramics, dish, vessel and etc. was the very simple process. The SOFC unit cell manufacturer using decalcomania method is very simple process. Especially, the decalcomania method was the most suitable manufacturing method for the segmented type SOFC. The cathode, prevent diffusion layer (PDL), anode functional layer (AFL) and electrolyte were manufactured using decalcomania method on porous anode support. The sintered electrolyte at 1450$^{\circ}C$ for 2 h using decalcomania method was very dense, and the thickness was about 10 ${\mu}m$. The cathode, the PDL and the AFL were manufactured using decalcomania method and was sintered at 1250$^{\circ}C$ for 2 h, and the sintered electrodes were the porous. As a result, with humidified hydrogen used as fuel, the cell with an 15 ${\mu}m$-thick AFL exhibited maximum power densities of 0.246, 0.364, 0.504W/$cm^2$ at 700, 750, 800$^{\circ}C$, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.939-946
• /
• 2009

In this paper, we propose a new network ASIP(Application Specific Instruction-set Processor) which was designed for simulation models by a machine descriptions language LISA(Language for Instruction Set Architecture). This network ASIP is aimed for an exclusive engine undertaking packet processing in a router. To achieve the purpose, we added a new necessary instruction set for processing a general ASIP based on MIPS(Microprocessor without Interlock Pipeline Stages) architecture in high speed. The new instructions can be divided into two groups: a classification instruction group and a modification instruction group, and each group is to be processed by its own functional unit in an execution stage. The functional unit was optimized for area and speed through Verilog HDL, and the result after synthesis was compared with the area and operation delay time. Moreownr, it was allocated to the Macro function ana low-level standardized programming language C using CKF(Compiler Known Function). Consequently, we verified performance improvement achieved by analysis and comparison of execution cycles of application programs.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.465-468
• /
• 2010

Purpose: Soft tissue deformity and skin defect after tumor resection in the periorbital area can cause trouble in the function of eyelid as well as in the aspect of external appearance. Therefore, as cosidering reconstruction in periorbital area, detailed assessment of both functional and aesthetic property are required. thus, the purpose of this study is to examine an appropriate reconstruction through clinical cases. Methods: A 14-year-old girl with congenital giant hairy nevus on right periorbital area was selected. Her first visit to our plastic surgery outpatient clinic was on July 2006. Since then, she has undergone staged removal of lesions and reconstruction by various flap technique such as pedicled island flap, forehead galeal flap, paramedian forehead flap, cheek rotation & advancement flap. Results: In the case of this girl, most lesions were removed and replaced by normal skins. Although there was the difference of skin color after skin graft, such difference was not noticeable and section scar by skin flaps was slight. There was no obvious dysfunction in the eyelids and the girl and her parents were satisfied with results after the surgery. Conclusions: In the reconstruction of soft tissue defect or soft tissue deformity and contracture, it is required to choose appropriate reconstruction method, considering aesthetic and functional aspects depending on aesthetic unit sufficiently.