• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.45-50
• /
• 2015

The flash point is one of the most important properties for characterizing the fire and explosion hazard of liquid solutions. In this study, a Tag open-cup apparatus was used to measure the flash points of two flammable binary mixtures, n-decane + n-octanol and acetic acid + n-butanol. The flash point temperature was estimated using the UNIFAC (Universal Functional Activity Coefficient) group contribution model and optimization method. The experimentally derived flash point was also compared with the predicted flash point. The two methods can estimate the flash point fairly well for the n-decane + n-octanol and acetic acid + n-butanol systems.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.597-604
• /
• 2004

Accurate software cost estimation is essential to both developers and customers. Most of the cost estimating models based on the size measure methods, such as LOC and FP, are obtained through size estimation. The accuracy of size estimation directly influences the accuracy of cost estimation. As a result, the overall structure of regression-based cost models applies the power function based on software size. Many growth phenomenon in nature such as the growth in living organism, performance of technology, and learning capability of human show an S-shaped curve. This paper proposes a model which estimates the developing effort by using the growth curve. The presented model assumes that the relation cost and size follows the growth curve. The appropriateness of the growth curve model based on Function Point, Full-Function Point and Use-Case Point, which are the general methods in estimating the software size have been confirmed. The proposed growth curve model shows similar performance with power function model. In conclusion, the growth curve model can be applied in the estimation of the software cost.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.159-166
• /
• 2010

Trip distribution is to connect travel demand for each OD pair based on travel cost, trip production and attraction derived from trip generation step. In real world the travel cost is a function of travel demand, but existing models could not fully consider such functional relation between travel cost and demand, which leads to an equilibrium in trip distribution model. This paper proves the equilibrium trip distribution by using gravity model. In order to obtain such equilibrium this paper also presents a solution algorithm based on fixed point theorem. The algorithm will be tested with an example and confirmed the equilibrium solution of trip distribution.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.49-54
• /
• 1995

Three types of floating-type automatic inlet were developed for the purpose of reduc- ing farmer's working hours required for water management and saving irrigation water. The point of automation is to use a float within the inlet which is floated and sinked by the ponding depth of paddy field, Thus opens and closes the control gate of irrigation. Suitability of each inlet may depend on production cost, applicability to paddy field condi- tions, and feasibility to farmers, etc. The first model was composed of three parts : chamber for irrigation control gate, chamber for float controlled by ponding depth, and connection bar between the two parts. It was designed to open and close the control gate gradually as the ponding depth drops and rises to a certain level. The second model was designed to improve the weak point of the first model which is the imperfect-closing of gate when it approaches to the end of ir- rigation. A switch-spring was equipped above the connection bar for perfect opening and closing of gate when the ponding depth reaches to a certain level. The third model was designed by combining the two chambers, that is, cut in halves the inlet volume of the above two models. Magnets were equipped above the float for perfect opening and closing gate. The functional experiment for three developed inlets was successfully carried out and the rating curves were derived.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.11 no.1
• /
• pp.44-50
• /
• 1986

In this paper, we find optimal policy for the (Q, r) inventory model under the lead time uncertainty. The (Q, r) inventory model is such that the fixed order quantity Q is placed whenever the level of on hand stock reaches the reorder point r. We first develop the single level inventory model as the basis for the analysis multi-level distribution systems. The functional problem is to determine when and how much to order in order to minimize the expected total cost per unit time, which includes the set up, inventory holding and inventory shortage cost. The model, then, is extended to the multi-level distribution system consisting of the factory, warehouses and retailers. In this case, we also find an optimal policy which minimizes the total cost of the contralized multi-level distribution system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1840-1855
• /
• 2015

Troubles are often met when traditional active contours extract boundaries of medical images with inhomogeneous bias and various noises. Focusing on such a circumstance, a localized mutual information active contour model is discussed in the paper. By defining neighborhood of each point on the level set, mutual information is introduced to describe the relationship between the zero level set and image field. A driving energy term is then generated by integrating all the information. In addition, an expanding energy and internal energy are designed to regularize the driving energy. Contrary to piecewise constant model, new model has a better command of driving the contours without initialization.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.186-196
• /
• 2010

It has been well known that traffic accidents occur under combined functional contributions of drivers, vehicles and road facilities, and that evaluation of safety levels for a specific road section or point is generally much complicated. Additionally, most of traffic accidents occur randomly implicating it is necessary to be evaluated in terms of probability theory. Thus, the evaluation model which reflects various characteristics and probabilistic distributions of traffic accidents has been necessary. The present paper provides a reliability based model with variables of probabilistic operating speeds and design speeds together which have been individually explaining associated characteristics in traffic accidents. Consequently, the model made it possible for speed management and road improvement projects to be evaluated in a common index. Application studies were performed in three cases. Through the studies, couples of facts were identified that the model successfully considered the probabilistic operating speeds and design speeds together and that then, the model evaluated road safety alternatives relatively which are complicatedly characterized and differently located.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.668-676
• /
• 2012

In this paper, on the assumption that MPI collective communication function is converted into a group of point-to-point communication functions in the transaction level, an algorithm that optimizes broadcast, scatter and gather function among MPI collective communication is proposed. The MPI hardware engine that operates the proposed algorithm was designed, and it was named the OCC-MPE (Optimized Collective Communication Message Passing Engine). The OCC-MPE operates point-to-point communication by using the standard send mode. The transmission order is arranged according to the algorithm that proposes the most frequently used broadcast, scatter and gather functions among the collective communications, so the whole communication time is reduced. To measure the performance of the proposed algorithm, the OCC-MPE with the Bus Functional Model (BFM) based on SystemC was designed. After evaluating the performance through the BFM based on SystemC, the proposed OCC-MPE is designed by using VerilogHDL. As a result of synthesizing with the TSMC $0.18{\mu}m$, the gate count of each OCC-MPE is approximately 1978.95 with four processing nodes. That occupies approximately 4.15% in the whole system, which means it takes up a relatively small amount. Improved performance is expected with relatively small amounts of area increase if the OCC-MPE operated by the proposed algorithm is added to the MPSoC (Multi-Processor System on a Chip).

• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.252-260
• /
• 2010

The point rainfall measurements need to be converted to the areal rainfall by means of mean areal precipitation (MAP) estimation methods. And it is not appropriate to evaluate the areal rainfall with constant drift because of the geomorphological influences to rainfall field. Non-stationarity should be applied to the estimation of the areal rainfall, therefore, to consider these effects. Kriging methods with special functional would be a suitable tool in this case. Generalized covariance Kriging method is the most developed one among different Kriging methods. From this point of view this study performs the analysis of its applicability to distributed runoff model. For these purpose, distributed rainfall was created by Thiessen and Kriging method. And distributed rainfall of each method was applied into HyGIS-GRM. The result of applying, Runoff was different in the rainfall data form. Therefore, To apply Kriging method with physical meaning is that it is the useful method as distributed rainfall-runoff model.

• Journal of Biomedical Engineering Research
• /
• v.14 no.3
• /
• pp.209-220
• /
• 1993

Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, Immunomagnetic cell separation. To synthesize micro-spheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio or synthesized microspheres was always smatter than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6-13 times higher than thats of the ml crospheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin Is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption Isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin ) . The effect of the kind and the amount of surface functional group was also examined.p was also examined.