• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.357-369
• /
• 2018

The Korean common bean (Phaseolus vulgaris L.) has been receiving increased attention as a functional food. The objective of this study was to reveal the phytochemicals genetic variation and antioxidant activity of 209 Korean common bean landraces. Antioxidant activity was evaluated with the DPPH (2,2-diphenyl-1-picryl-hydrazyl-hydrate), ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid), ferric reducing antioxidant power (FRAP), and superoxide dismutase (SOD) assay. Antioxidant activities among common bean accessions showed wide variation. Four flavonoids (kaempferol, myricetin, quercetin, and naringenin) of the 209 Korean common bean landraces were measured using HPLC. Among them, kaempferol had the highest phytochemicals compared to the other three flavonoids. Using the relative antioxidant capacity index (RACI), it was found out that the IT104587 had the highest antioxidant activity. Meanwhile, in clustering analysis, the Korean common bean landraces were classified into three clusters. Among them, cluster II contained 64 landraces with higher antioxidant activities and phytochemicals than the other clusters, except DPPH. The results could provide information on the valuable Korean common bean landraces for the development of new common bean varieties.

• Mycobiology
• /
• v.49 no.4
• /
• pp.406-420
• /
• 2021

Gloeostereum incarnatum has edible and medicinal value and was first cultivated and domesticated in China. We sequenced the G. incarnatum monokaryotic strain GiC-126 on an Illumina HiSeq X Ten system and obtained a 34.52-Mb genome assembly sequence that encoded 16,895 predicted genes. We combined the GiC-126 genome with the published genome of G. incarnatum strain CCMJ2665 to construct a genetic linkage map (GiC-126 genome) that had 10 linkage groups (LGs), and the 15 assembly sequences of CCMJ2665 were integrated into 8 LGs. We identified 1912 simple sequence repeat (SSR) loci and detected 700 genes containing 768 SSRs in the genome; 65 and 100 of them were annotated with gene ontology (GO) terms and KEGG pathways, respectively. Carbohydrate-active enzymes (CAZymes) were identified in 20 fungal genomes and annotated; among them, 144 CAZymes were annotated in the GiC-126 genome. The A mating-type locus (MAT-A) of G. incarnatum was located on scaffold885 at 38.9 cM of LG1 and was flanked by two homeodomain (HD1) genes, mip and beta-fg. Fourteen segregation distortion markers were detected in the genetic linkage map, all of which were skewed toward the parent GiC-126. They formed three segregation distortion regions (SDR1-SDR3), and 22 predictive genes were found in scaffold1920 where three segregation distortion markers were located in SDR1. In this study, we corrected and updated the genomic information of G. incarnatum. Our results will provide a theoretical basis for fine gene mapping, functional gene cloning, and genetic breeding the follow-up of G. incarnatum.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.12
• /
• pp.387-402
• /
• 2020

Conventional automotive development has mainly focused on ensuring correctness and safety and security has been relatively neglected. However, as the number of automotive hacking cases has increased due to the increased Internet connectivity of automobiles, international organizations such as the United Nations Economic Commission for Europe(UNECE) are preparing cybersecurity regulations to ensure security for automotive development. As with other IT products, automotive cybersecurity regulation also emphasize the concept of "Security by Design", which considers security from the beginning of development. In particular, since automotive development has a long lifecycle and complex supply chain, it is very difficult to change the architecture after development, and thus Security by Design is much more important than existing IT products. The problem, however, is that no specific methodology for Security by Design has been proposed on automotive development process. This paper, therefore, proposes a specific methodology for Security by Design on Automotive development. Through this methodology, automotive manufacturers can simultaneously consider aspects of functional safety, and security in automotive development process, and will also be able to respond to the upcoming certification of UNECE automotive cybersecurity regulations.

• Korean journal of applied entomology
• /
• v.60 no.1
• /
• pp.79-90
• /
• 2021

Landscape composition and structure are important factors determining biological diversity including pests and natural enemires in agricultural ecosystem. This study was conducted to indentify effect of landscape composition on occurrence of lepidopteran pest population in Geochang, Gyoungdnam. For this, orchard characteristics and management practices were surveyed in 80 conventional apple orchards in Geochang, Korea, along with the monitoring of pest population densities. The landscape features of each surveyed orchard also obtained by extracting information from the public-service map. Grapholita molesta was the most dominat and damaging pest followed by Phyllonorycter ringoniella and Carposina sasakii in trap catches. Adoxophyes paraorana occurrences were low. Farmers spray insecticides and fungicides ap. 12.4 times per year respectively while acaricides were sprayed 2.4 times. Major landscape features such as surrounding apple orchard or paddy field did not influence the pest populations but presence of plum, peach, wild peach, graph, and even abandoned orchards significantly resulted in higher pest population mostly on G. molesta. C. sasakii population was higher in orchards with grape, peach, and P. ringoniella with peach, grape, abandoned orchards and jujube. Results highlight the need of landscape management not only for the rural amenity but also for increasing functional diversity of agroecosystem as well as reducing pest population.

• Korean Journal of Community Nutrition
• /
• v.25 no.6
• /
• pp.464-473
• /
• 2020

Objectives: The purpose of this study was to compare and analyze e-commerce food purchase behavior and the perceptions of adult women according to their household types. Methods: The e-commerce food purchases of 318 adult women were surveyed and analyzed according to their household types (one-person or couple household (OCH); a household with children (HC); a household with parents (HP)). Results: The total amount of food purchases over 6 months through e-commerce according to household types was in the descending order of OCH (60.3%), HC (57%), and HP (55.1%) thus showing a significant difference (P < 0.05) in behavior between household types. The reasons for purchasing food through e-commerce included: a lower price than offline (30.8%), convenient delivery and transportation (30.2%), and food diversity (21.1%). When purchasing food online, the most important factor was price and quality, followed by quick and accurate delivery for OCH, exact information given about the product for HC, and recommendation from other consumers for HP (P < 0.01). The main foods purchased through e-commerce were coffee, tea (42.1%), instant and frozen foods (39.9%), water, beverages, dairy products (37.7%), snacks, bread, rice cakes (31.5%), and functional foods (27.4%). The percentage of respondents who were very satisfied or satisfied with their e-commerce food purchases was HP (84.1%), OCH (69.9%), and HC (65.6%) in that order (P < 0.05), and 96.5% of all subjects stated that they would be willing to purchase food through e-commerce in the future. The advantages of purchasing food through e-commerce were seen to be the highest in order and payment convenience with 4.1 points out of 5, followed by low price (4.0), variety of products (3.9), and ease of food purchase (3.9). Among the disadvantages listed, concerns about product damage and deterioration during delivery and differences between the displayed product and the delivered product were the highest with 3.7 points. Conclusions: The characteristics and perceptions of female consumers according to household types are important factors in enhancing the reach of e-commerce, and in preparing guidelines for food selection through e-commerce.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2021

Introduction : OMFT is a therapeutic technique based on sensorimotor, motor control and motor learning, and its major goal is to improve oral motor function. The oral motor conceptual hierarchical development is divided into 5 steps: 1) sensorimotor, 2) movement integration, 3) structural movement, 4) functional oral motor, and 5) comprehensive oral motor. Discussion : The OMFT consists of 3 techniques, 10 categories, and 50 sub-item. 1) Warming up technique: 2 categories, 12 sub-item, warming up by sensory awareness and adaptation, therapy situation adaptation, neck movement; 2) Key point technique: 7 categories, 30 sub-item, oral motor facilitation and increasing chewing skill by direct stroke of oral structures such as the face, lips, cheeks, gum, jaws, and tongue; 3) Application technique: 1 category, 8 sub-item, facilitate food intake and swallowing. Conclusion : The goal of this article is to introduce 3 techniques, 50 sub-item of OMFT, as a comprehensive oral motor therapy method, for application to clients. This article provides information that will help oral motor specialists in treating clients with oral motor problems more effectively and professionally.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.490-504
• /
• 2021

The online market is gradually increasing due to the increase in single-person households, the development of information and communication technologies, the emergence of various new products, and price comparison competition. Companies need differentiation strategies to adapt to changes in the online environment and secure a competitive edge. In this environment, the objective is to consider the importance of consumer perception of websites in order to generate continuous growth and revenue in the online market as well as to differentiate them from competitors using an online service environment that can affect consumers' internal responses. In this study, we present aesthetic, functional, privacy, and interaction factors as components of e-servicescape to study the impact of e-servicescape on website trust, brand attitude, and repurchase intention. In the data analysis, 485 ordinary people with online shopping experience were surveyed. The questionnaire was based on a 7-point Likert scale for each question and statistical analysis was conducted using SPSS 24.0 and AMOS 25.0. The analysis shows that in e-servicescapes aesthetic and privacy factors influence website trust and brand attitudes and consequently affect repurchase intention.

• Journal of Convergence for Information Technology
• /
• v.12 no.1
• /
• pp.76-82
• /
• 2022

Recently, natural and social disasters in Korea are increasing, and new disasters such as COVID 19 and sinkholes, and large-scale disasters that combine natural and social disasters are occurring frequently. In order to reduce damage caused by disasters and effectively respond to disasters, the importance of disaster safety education is emerging because it is necessary to understand the awareness of disaster situations and the functional response process. Ministry of Public Interior and Security is providing disaster safety education for emergency managers through 54 specialized disaster safety education institutions. There is also a lack of experience facilities. This has a problem in that it makes it difficult for disaster safety personnel to effectively respond to disasters due to lack of experience in actual disaster sites. Also, unlike other education fields, the connection between disaster safety education contents and new technologies such as AI is still lacking. In this study, focusing on natural disaster, the current status and problems of domestic disaster safety education institutions and their contents are investigated and analyzed, and based on this, this study suggested improvement plans for domestic disaster safety education contents such as establishment of a unified disaster safety standard curriculum, production and distribution of disaster safety education experience contents using virtual reality technology and infotainment technology, and development of mobile AI tutoring service.

• Journal of the Korean Chemical Society
• /
• v.66 no.3
• /
• pp.185-193
• /
• 2022

The theoretical investigation has been performed to predict thermodynamic stability, density, detonation velocity, and detonation pressure of energetic salts produced by pairing of nitrogen-rich anions (tetrazine, oxadiazole etc.) and cations (NH₃OH⁺, NH₂NH₃⁺, CH₉N₆⁺, C₂H₆N₅⁺). All possible geometries and the binding energy for the trigger bond of energetic salts have been optimized at the B3LYP/cc-pVDZ level of theory. The detonation velocity and detonation pressure have been calculated using Kamlet-Jacobs equation, while enthalpy has been predicted at the G2MP2 level of theory. The predicted results reveal that the energetic salts including small sized NH₃OH⁺(1) and NH₂NH₃⁺(2) cations increase detonation property. And also the energetic salts including more amino group (-NH₂) such as CH₉N₆⁺(3) cation increase thermodynamic stability. These results provide basic information for the development the high energy density materials (HEDMs).

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.276-282
• /
• 2022

Close communication between clinicians and dental technicians is an important factor in providing successful prostheses. The exchange of opinions with laboratories has mainly been in the form of written prescriptions and a photos, but it has been reported that information transmission may be limited. Currently, as digital technology-based prosthesis fabrication is common, 3D image objects can be stored on the web and can be easily viewed through a mobile web browser. In this article, we introduce cases where the design of the prosthesis was improved by designing the prosthesis using CAD software and reviewing the prosthesis designed with the clinical side through a web viewer. Through this protocol, it was possible to improve the occlusal surface and crown contour, the opposing teeth condition, the size of the gingival embrasure, and the shape of pontic. The process of sharing, discussing, and modifying the prosthesis design with the clinician and technician through a web viewer contributes to reflecting the diversity of oral conditions and individualized needs, thereby helping to make functional and esthetic prostheses.