• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.269-275
• /
• 2014

The purpose of this study is to develop functional garment wear for patients with adolescent idiopathic scoliosis (AIS) and to analyze changes in Cobb's angle and the COM of the body and the pelvis during gaits in order to identify the effects of the functional garment wear. The subjects of the study were 9 patients with adolescent idiopathic scoliosis, who wore the functional garment wear for 12 weeks 12 hours a day. As for the research methods, the scoliotic angle was measured using Cobb's angle, and the shoulder angle and the COM of the body and the pelvis during gaits for the AIS patients were calculated using five high speed infrared cameras. As a result of the study, it was found that the scoliotic angle (Cobb's angle) was reduced significantly and that the smaller the original scoliotic angle, the greater the effects. As for the shoulder motion angle, a significantly larger angle was found 12 weeks after wearing the functional garment wear, and particularly, larger shoulder motion (activity) was observed at the phase of right heel contact. As for the motion of the body and the pelvis, the moving ranges were significantly reduced after wearing the functional garment wear for 12 weeks, which stabilized gait in the patients with adolescent idiopathic scoliosis.

• Korean Journal of Human Ecology
• /
• v.13 no.1
• /
• pp.153-158
• /
• 2004

With considerable development of comfortable and functional clothing in recent years, we need to evaluate the effects of garment pressure in daily wear on each parts of human body because the garment pressure is important to design the clothing. This study was designed to examine the effects of body postures on garment pressure on each parts of human body in the actual clothing conditions. All the data were collected from 50 volunteered subjects. The Garment pressure was measured in lune and December with 8 points CPMS clothing pressure system from scapular, upper am, elbow, under arm, front waist line, side waist line, abdomen, crista ilica, upper hip, middle hip, front thigh, back thigh, front knee and back knee. The postures of subjects were controlled with 3 positions such as standing (posture 1), sitting on the chair (posture 2), and sitting on the floor (posture 3) during measurement of clothing pressure. Clothing weights were more in men than in woman. It showed that clothing weights had no effects on the garment pressure. In this study, however, just the garment pressures on scapular and top of the hip increased significantly by clothing weight (p<. 05). Clothing horizontally pressed on scapular and top of hip but not on other parts. When subjects stood up, the garment pressure was the highest on the side waist. Especially, clothing pressure on the front waist point was lower than that of the left side waist. On the upper parts of the human body, the garment pressure of left side waist was the highest, and followed by front waist, crista ilica, and abdomen in order. When subjects were sitting on the chair, the garment pressure on the lower parts of the human body was the highest on the top of hip. When the subjects were sitting on the chair or on the floor, the surface area on their skin of hip and waist parts increased by postures. In addition, it showed that men felt more comfortable than women on higher clothing pressure level.

• Korean Journal of Human Ecology
• /
• v.24 no.1
• /
• pp.97-109
• /
• 2015

Recently, because the market for compression wear now includes all consumers, not just professionals, various items for recovery after exercising or for enhanced effects from exercise have been introduced. In this research, a systematic and stepwise design process was proposed to develop compression garment that has both functional area and appropriate pressure to protect the knee when exercising. The U-V format functional area that wraps underneath the knee was selected by considering the shape and change in the skin length when bending the knee. After the selection of the functional area, a total of seven knee design areas, including the existing product, were designed to determine the appropriate pressure. After various movements, the compression garment was ranked in terms of support of the knee, level of pressure, discomfort of seam line, and comfort of popliteal; the preferred design was selected using the quad method. Four compression wear garments were produced using two selected preferred designs; the wear evaluation was performed using a seven-point Likert scale. As a result, the optimal reduction rate of the pattern was calculated based on Ziegert and Keil's method. The applied percentage of the fabric stretch at the upper part of the crotch was 66% for the width and 50% for the length; for the lower part of the crotch, only 66% for the width was applied. Moreover, it was determined that the design of the U-V knee protection part was preferred when a 7 mm square was placed at a 1 mm distance because this not only supports the knee but also allows the fabric to accommodate various skin deformations.

• International Journal of Costume and Fashion
• /
• v.14 no.2
• /
• pp.67-79
• /
• 2014

Recent research suggested that hospitals have not responded to consumer demand for the improved aesthetic and comfort of their patient garments. Thus a new patient garment has been developed considering human factors based on the Functional-Modesty-Aesthetics model. Based on the reviewed literature and the model, necessary design requirements were identified. Then the patient garment was evaluated in comparison to existing ones with regard to potential patients' satisfaction levels. As a result, the developed patient garment received better evaluations in the aspects of overall aesthetic satisfaction, color satisfaction, and willingness to wear than the existing patient garments.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1049-1059
• /
• 2011

This study investigates the current state of companies that manufacture and sell outdoor wear. A survey was conducted to identify what problems they had and what aspects they needed to supplement through a comparison and analysis of their block patterns. Companies that manufactured outdoor wear and those that sold them were separately surveyed to understand their current state. The manufactures included 4 companies and 14 sellers. The survey used interviews to cover the areas of target consumers, development patterns, production lines, body size, nominal size, production size, and functional materials for each item, and aspects that need improvement. The survey period was from September $3^{rd}$ to $10^{th}$ 2008. There were three block patterns for jackets, T-shirts, and pants. The investigator collected the patterns used by three outdoor clothing manu-facturers for comparison and assessment. As a result, the mean age of the target consumers set by the outdoor clothing manufacturers and sellers was 25.3-50.7 and 29.2-42.5, respectively, which shows that the outdoor clothing had a wider distribution of target consumers than the sellers. It is imperative for them to segment and differentiate the target consumers and concepts. The basic body measurements the companies used to draw the upper and lower garment patterns were the bust circumference for the upper garment patterns and the waist circumference for the lower garment patterns. The basic nominal size was 95 for the upper garment and 70 for the lower garment. Also analyzed were the block patterns according to the items to understand the pattern characteristics of each of the companies. There were a total of 35, 36, and 30 items for the jackets, T-shirts, and pants, respectively, to measure size. The items were then compared with one another in mean and standard deviation. The analysis indicate that the block patterns were not fit for women in their twenties or thirties to wear and required revisions in the length of the upper garment, the height of sleeve cap, bust circumference, hip length, and pant length.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.75-87
• /
• 2019

The purpose of the study was to suggest a cycle wear top jersey improved in mobility. The study developed a new cycle wear with improvement in dissatisfaction factors by planning design, pattern and the functionality of fabric. Considering the amount of sweat and the necessities of compression part, the basic material, the additional compression material, and the mesh material were arranged differently according to areas. The assessment of the developed cycle wear was composed of wearing comfort evaluation by female cyclist, photo analysis and garment pressure evaluation. The developed cycle wear was evaluated and compared with the current cycle wear. As a result of wearing comfort evaluation, the developed cycle wear was evaluated as better than the existing ones in all part, particularly in the areas of reflection tape and materials, partial pressure, pocket size, and prevention of loss. Photo analysis was in agreement with the appearance evaluation of the participants. As a result of garment pressure evaluation, the front neck part was more comfortable and the upper arm, abdomen, and waist area showed higher pressure, so it partially supported the body. This study has significant meaning for developing a new cycle wear top, protecting the body and improving the exercise effect.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.104-116
• /
• 1990

An example of functional army's training wear was developed with careful considerations given to the actual user. Three steps of a functional clothing design process were followed in the design procedure. First, information on the adequacy of the current army's training wear was collected by interviews with 192 persons. Second, the current design and construction of the training wear was altered to meet the user's need from the result of the interview. Third, the performance of the newly designed army's training wear was evaluated for their effectiveness in several aspects such as conditions of the microclimate within clothing, metabolic rate, garment pressure during arm movements and appearance during body motions.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.401-406
• /
• 2005

The objective of this field research is to determine consumer's fashion sense and provide helpful information to manufacturers when planning designs and merchandizing strategies. This study's purpose was to observe what was being worn, colors and tones. The method of research was fixed point observation using digital photos. The subjects of the research were female college students, 18-22 years old. The T-shirt has become the representative item for casual and comfortable wear by the female college students. Pants and blue jeans were worn more often than skirts as a lower garment. This shows that the students think about their activities when choosing a lower garment. The majority of these students chose clothing that functioned well for their school activities. Among students that wore skirts about half wore a functional knee length while the other half wore a more fashionable mini-skirt. These students appear to care about both fashion and function. Blue was especially popular, with 70.4% of all lower garments being blue. This effect makes the body look thinner and may be one reason why blue is so popular. White is a popular color as an upper garment. White upper garments are easily matched with any color, while blue upper garments coordinate well with similarly colored blue lower garments. The distribution of upper garment color is significantly influenced by the seasons. Blue jean tones were many and varied, while upper garments were mostly weak tones and bright tones of pale, light and soft.

• Journal of the Korean Society of Costume
• /
• v.56 no.6 s.105
• /
• pp.58-71
• /
• 2006

This research is aimed to develop the functional clothing designs for disabled women in the manner of investigating design preferences among them by means of questionnaire and interview with 150 disabled women as respondents and interviewees. The findings of this research are summarized as follows: 1. Regarding satisfaction with ready-made clothes, the respondents answered 'very satisfied' (1.6%), 'usually satisfied' (14.1%), 'moderate' (20.3%) and 'unsatisfied' (53.1%), suggesting that they had been generally unsatisfied with ready-made clothes. 2. There were more disabled women preferring to ready-made clothes with one-grade bigger (loose.) size than the actual one (53.1%) instead of completely fitted size (43.8%) when they purchased such clothes. This result indicates that they prefer to ready-made clothes with bigger size than the actual one because most of such clothes are made up of non-elastic materials which may be unfavorable for wearer's activities. 3. It was found that primarily worn upper garment among them was T-shirt (59.4%). The reason may be that T-shirt is favorable for using prosthesis and orthotics such as wheelchair, walking stick and crutches thanks to its remarkably high activity as well as simple to maintain, compared with other kinds of upper garments. 4. Regarding preferences to functional clothing designs, the primarily worn lower garment among them was trousers (85.9%); the reason was easiness to move. The main reasons of avoiding to wear a skirt included 'difficult to move' (40.6%) and 'exposed disabled region' (30.3%). Accordingly, functional clothing for disabled women should be developed in consideration for their individual characteristics of disability associated with the disabled region such as wheelchair user, crutch user or brace user, In addition, the designs should be made so that they are not different from those for non-disabled people.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1812-1823
• /
• 2010

The modifiable design of clothes is significant in that a single garment can be presented in various ways and can be modified by user adjustments as well different kinds of figurative beauty can be expressed through the garment. This study departmentalized the case of knitwear in the modifiable design of clothes to propose a possibility of a variable knit fashion that makes the most of the knit characteristics. This study investigated precedent research, arranged general terms, created fundamental notions, found the background of the advent, and located specific characters in the modifiable design as well as arranged a concept, type, structure, and traits for the knit. The following results were obtained through this study. First, the modifiable design of the clothes can express the change of the silhouette and the change of the item itself or a change in the item according to the change in the mode of wearing, manipulation, and technology. Second, the results show that modifiable knit designs by open & close are mostly used according to manipulation and have no existence in this study according to the technology. Third, there was a noticeable appearance of a modifiable knit design from 2002 to 2004. However, it was increased again in 2009 after a steady decrease in 2005 and 2008. Finally, it can create effects in several dresses in the visual aspect and functional aspect.