• Progress in Superconductivity and Cryogenics
• /
• v.18 no.2
• /
• pp.42-47
• /
• 2016

A free-piston reciprocating expander is a device which operates without any mechanical linkage to a stationary part. Since the motion of the floating piston is only controlled by the pressure difference at two ends of the piston, this kind of expander may indispensably require a sophisticated active control system equipped with multiple valves and reservoirs. In this paper, we have suggested a novel design that can further reduce complexity of the previously developed cryogenic free-piston expander configuration. It is a simple replacement of both multiple valves and reservoirs by a combination of an orifice valve and a reservoir. The functional characteristic of the integrated orifice-reservoir configuration is similar to that of a phase controller applied in a pulse tube refrigerator so that we designate the one as a phase controller. Depending on the orifice valve size in the phase controller, the different PV work which affects the expander performance is generated. The numerical model of this unique free-piston reciprocating expander utilizing a phase controller is established to understand and analyze quantitatively the performance variation of the expander under different valve timing and orifice valve size. The room temperature experiments are carried out to examine the performance of this newly developed cryogenic expander.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1055-1060
• /
• 2013

The adsorption structures of threonine on the Ge(100) surface were investigated using core-level photoemission spectroscopy (CLPES) in conjunction with density functional theory (DFT) calculations. CLPES measurements were performed to identify the experimentally preferred adsorption structure. The preferred structure indicated the relative reactivities of the carboxyl and hydroxymethyl groups as electron donors to the Ge(100) surface during adsorption. The core-level C 1s, N 1s, and O 1s CLPES spectra indicated that the carboxyl oxygen competed more strongly with the hydroxymethyl oxygen during the adsorption reaction. Three among six possible adsorption structures were identified as energetically favorable using DFT calculation methods that considered the inter- and intra-bonding configurations upon adsorption onto the Ge(100) surface. These structures were O-H dissociated N dative inter bonding, O-H dissociated N dative intra bonding, O-H dissociation bonding. One of the adsorption structures: O-H dissociated N dative inter bonding was predicted to be stable in light of the transition state energies. We thus confirmed that the most favorable adsorption structure is the O-H dissociated N dative-inter bonding structure using CLPES and DFT calculation.

• KIEAE Journal
• /
• v.17 no.5
• /
• pp.87-94
• /
• 2017

Purpose: Prefabricated modular space such as a container construction has recently been interested unlike the conventional construction method, and their scale have expanded from small buildings such as cafes, houses and pensions to shopping centers, complex cultural spaces where shows and exhibitions are possible doing. In this way, the container is in the spotlight as an advantage such as mobility, flexibility, correspondence, economic efficiency, recyclability and so on. However, there are no specific guidelines and standard design methods in aspects of structural calculation, functional insulation and environmental configuration. Therefore, as the first step to resolve these problems, this study has focused on the field of environmental performance of container construction, presented appropriate guidelines and searched ways to improve performances. Method: For this study, seven types of the modular building were chosen and compared, and their energy performances have been analyzed using a proven simulation tool. Essential methodology and terminology were examined to estimate and judge their efficiency. Result: In conclusion, energy performances depend on specific configuration of combined unit spaces, and design guidelines cold be set up for promoting their use in the practical field.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.7
• /
• pp.461-470
• /
• 2013

The capacity for tracing relationships among various artifacts which are created at each phase of software system development is essential for software quality management. Software release refers to delivering a set of newly created or changed artifacts to customers. The relationships among artifacts which comprise software release must be traced so that the work for customer's requirement of change and functional enhancement is effectively established. And release management can be effectively realized through the integration of configuration management and change management. This paper proposes the technique for supporting change management of artifacts and for tracing relationships of artifacts which comprise software release through the integrated environment of personal workspace and configuration management system. In the proposed environment, the visualized version graph and automated tagging function are used for tracing relationships of artifacts.

• The Journal of Korean Association of Computer Education
• /
• v.12 no.6
• /
• pp.69-79
• /
• 2009

The current user interface (UI) of NEIS school affairs business system is not efficient in conducting the business because of complicated data input forms as well as unharmonious connection between similar items and functional menu. In the paper, the term UI means a comprehensive concept including input/output, input/output related functionality, and menu configuration for users to perform their tasks. The first survey, carried out with one hundred teachers at three elementary schools of Kyeonggi-do, shows that the UI problems of the system are manual inputs, inconvenient menu configuration, disconnection between academic calendar and educational process, complexities of managing attendance report and curriculum evaluation, etc. We have improved the UI design by providing more efficient input method and more systematic menu configuration compared to the current system, and then evaluated the design through the second survey. Evaluation results show that users prefer the proposed UI design especially from the viewpoint of user-friendly input interface and user-oriented view composition.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.399-410
• /
• 2012

Due to development of modern medical services and economics, people raised expectation and demand about medical services from previous disease treatment to comprehensive health care covering prevention and health care. Responses of each medical facility to these social needs and the evolution of concept of medicine rapidly occur. The health examination centers are being operated with the purpose of health examination and this trend is reflected on several aspects such as the size of the facilities, function and configuration of space in health examination centers. Thus, health examination centers consisting of various space systems appear, but this trend and interpretations are lacking. Therefore, the purpose of this study is to draw trends of system through analysis of types and its evolved space systematic analysis and establish it. Analysis targets were classified into small, medium and large groups by sizes based on number of space and a total of 12 health examination centers in four for each category were selected. As research methods, functional relationship of space was examined through analysis of type in which segmentalized type tools were applied in local units. The flow diagram was established based on direction turning point and was classified into sub-flow and main-flow in local units and the systems between local units were derived. Finally, the results of this study can be summarized as the following three results. 1) The space connection system of health examination center showed four systems such as circulation, independence, continuation, and network. 2) Local type indicators and global type indicators which were evolved more from limitation of type analysis tools in existing research were derived so that more systematic analysis could be made. 3) Network system is distributed approach system and space for each function is formed around public space.

• International Journal of Knowledge Content Development & Technology
• /
• v.8 no.1
• /
• pp.25-36
• /
• 2018

Research data must be testable. Science is all about verification and testing. To make data testable, tools used to produce, collect, and examine data during the research must be available. Quite often, however, these data become inaccessible once the work is over and the results being published. Hence, information and the related context must be provided on how research data are preserved and how they can be reproduced. Open Science is the international movement for making scientific research data properly accessible for research community. One of its major goals is building data repositories to foster wide dissemination of open data. The objectives of this research are to examine the features of research data, common repository platforms, and community requests for the purpose of designing functional requirements for research data repositories. To analyze the features of the research data, we use data curation profiles available from the Data Curation Center of the Purdue University, USA. For common repository platforms we examine Fedora Commons, iRODS, DataONE, Dataverse, Open Science Data Cloud (OSDC), and Figshare. We also analyze the requests from research community. To design a technical solution that would meet public needs for data accessibility and sharing, we take the requirements of RDA Repository Interest Group and the requests for the DataNest Community Platform developed by the Korea Institute of Science and Technology Information (KISTI). As a result, we particularize 75 requirement items grouped into 13 categories (metadata; identifiers; authentication and permission management; data access, policy support; publication; submission/ingest/management, data configuration, location; integration, preservation and sustainability, user interface; data and product quality). We hope that functional requirements set down in this study will be of help to organizations that consider deploying or designing data repositories.

• Molecules and Cells
• /
• v.27 no.5
• /
• pp.503-513
• /
• 2009

Proteoglycans located in basement membranes, the nanostructures underling epithelial and endothelial layers, are unique in several respects. They are usually large, elongated molecules with a collage of domains that share structural and functional homology with numerous extracellular matrix proteins, growth factors and surface receptors. They mainly carry heparan sulfate side chains and these contribute not only to storing and preserving the biological activity of various heparan sulfate-binding cytokines and growth factors, but also in presenting them in a more "active configuration" to their cognate receptors. Abnormal expression or deregulated function of these proteoglycans affect cancer and angiogenesis, and are critical for the evolution of the tumor microenvironment. This review will focus on the functional roles of the major heparan sulfate proteoglycans from basement membrane zones: perlecan, agrin and collagen XVIII, and on their roles in modulating cancer growth and angiogenesis.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.34-46
• /
• 2012

Dopants and defects can be introduced as well as the intercalation of metals into single wall carbon nanotubes (SWCNTs) to modify their electronic and magnetic properties, thus significantly widening their application areas. Through spinpolarized density functional theory (DFT) calculations, we have systemically studied the following: (i) (10,0) and (5,5) SWCNT doped with nitrogen ($CN_xNT$), (ii) (10,0) and (5,5) SWCNT with pyridine-like defects (3NV-$CN_xNT$), and (iii) chemical functionalization of (10,0) and (5,5) 3NV-$CN_xNT$ with 12 different transition metals (TMs) (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Pd, and Pt). Attention was done in searching for the most stable configurations, deformation, calculating the formation energies, and exploring the effects of the doping concentration of nitrogen and pyridine-like nitrogenated defects on the electronic properties of the nanotubes. Also, calculating the corresponding binding energies and effects of chemical functionalization of TMs on the electronic and magnetic properties of the nanotubes has been made. We found out that the electronic properties of SWCNT can be effectively modified in various ways, which are strongly dependent not only on the concentration of the adsorbed nitrogen but also to the configuration of the adsorbed nitrogen impurities, the pyridine-like nitrogenated defects, and the TMs absorbed; due to the strong interaction between the d orbitals of TMs and the p orbitals of N atoms, the binding strengths of TMs with the two 3NV-$CN_xNT$ are significantly enhanced when compared to the pure SWCNTs.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.3045-3050
• /
• 2011

The synthesis of copolymers containing thiophene and benzimidazole unit by Stille polymerization is reported. The polymers with many unsubstituted thiophene units in the backbone have been reported to show low solubility, which has been a problem for spin-coating for the device fabrication. In dihexyl-2H-benzimidazole, the sulfur at 2-position of BT unit was replaced with dialkyl substituted carbon, while keeping the 1,2-quinoid form, to improve the solubility of the polymers. The PL emission spectra of the PHBIT1, PHBIT2 and PHBIT3 in chloroform solutions show maximum peaks at 500~561 nm. In thin films, maximum peaks of the PHBITs appeared at 529, 562 and 569 nm, respectively. The EL emission maxima of the PHBIT1 and PHBIT2 appear at around 588 and 576 nm, respectively. The current density and maximum luminescence of the LED with the configuration of ITO/PEDOT/ PHBIT2/Ca/Al are 552 mA/$cm^2$ and 46 cd/$m^2$, respectively.