• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.233-237
• /
• 1991

In the study, samples were made on the electrode in internal glass bell jar by the radio frequency discharge polymerization. The polymerization rate of samples was observed as a function of r.f. discharge power. The characteristics of polymers obtained from TMDSO and HMDSO were analyzed by FT-IR and TGA, and their electrical properties were examined on insulation resistivity, breakdown voltage, dielectric constant, and tan ${\delta}$. (1) There was no difference between PPTMDSO and PPHMDSO in a polymerization rate and thermal and electrical properties. (2) The growing rates of thin film with discharge powers were from $0.42{\mu}/h$ to $1.2{\mu}m/h$. (3) According to IR spectra analysis, discharge power did not effect polymer structure due to polyermization mechanism and effected only polymerization rate. (4) PPTMDSO and PPHMDSO were thermally resistive polymers which did not decompose to $300^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.137-140
• /
• 1993

Electrical properties and thermal annealing effects of $C_{22}$-quinolium(TCNQ) Langmuir-Blodgett(LB) films were studied. Typical current-voltage(I-V) characteristics along the perpendicular direction chow an anomalous behavior of breakdown near the electric-field strength of $10^{6}$V/cm. To see the thermal influence of the specimen, current was measured as a function of temperature(20∼$180^{\circ}C$). It shows that the current increases about 4 orders of magnitude near 60∼$70^{\circ}C$ and remains constant far a while up to ∼$150^{\circ}C$ and then suddenly drops. Such increase of current near 60∼$70^{\circ}C$ seems tn be related to a softness of alkyl chains. Besides the electrical measurements, UV/visible absorption(300∼800 nm) of the thermally annealed sample was measured to see the internal-structure change. It is found that there are four characteristic peaks. At 494 nm, the optical absorption of the thermally annealed specimen at $60^{\circ}C$ starts increase and stays almost constant upto∼ $140^{\circ}C$. And eventually it disappears above $180^{\circ}C$. After heat treatment of the specimen up to $150^{\circ}C$, Uv/visible absorption was measured while cooling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.175-177
• /
• 2002

Electrical characteristics of the Si-O superlattice diode as a function of annealing conditions have been studied. The nanocrystalline silicon/adsorbed oxygen superlattice formed by molecular beam epitaxy (MBE) system. Consequently, the experimental results of superlattice diode with multilayer Si-O structure showed the stable and good insulating behavior with high breakdown voltage. This is very useful promise for Si-based optoelectronic and quantum device as well as for the replacement of silicon-on-insulator (SOI) in ultra high speed and lower power CMOS devices in the future, and it can be readily integrated with silicon ULSI processing.

• Mass Spectrometry Letters
• /
• 제9권4호
• /
• pp.91-94
• /
• 2018

Bilin tetrapyrroles are metabolic products of the breakdown of porphyrins within a species. In the case of mammals, these bilins are formed by the catabolism of heme and can be utilized as either biomarkers in disease or as an indicator of human waste contamination. Although a small subset of bilin tandem mass spectrometry reports exist, limited data is available in online databases for their fragmentation. The use of fragmentation data is important for metabolomics analyses to determine the identity of compounds detected within a sample. Therefore, in this study, the fragmentation of bilins generated by positive ion mode electrospray ionization is examined by collision-induced dissociation (CID) as a function of collision energy on an FT-ICR MS. The use of the FT-ICR MS allows for high mass accuracy measurements, and thus the formulas of resultant product ions can be ascertained. Based on our observations, fragmentation behavior for hemin, biliverdin and its dimethyl ester, phycocyanobilin, bilirubin, bilirubin conjugate, mesobilirubin, urobilin, and stercobilin are discussed in the context of the molecular structure and collision energy. This report provides insight into the identification of structures within this class of molecules for untargeted analyses.

• Journal of Semiconductor Engineering
• /
• 제3권2호
• /
• pp.161-167
• /
• 2022

Electrical characteristics of LDMOS power device with LDD(Lightly Doped Drain) structure is studied with variation of the region of channel and LDD. The channel in LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of CMOS inverter. Two-dimensional TCAD MEDICI simulation is used to study hot-carrier effect, on-resistance Ron, breakdown voltage, and transient switching characteristic. The voltage-transfer characteristics and on-off switching properties are studied as a function of the channel length and doping levels. The digital logic levels of the output and input voltages are analyzed from the transfer curves and circuit operation. Study indicates that drain current significantly depends on the channel length rather than the LDD region, while the switching transient time is almost independent of the channel length. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.366-373
• /
• 2015

Sol-gel binder was prepared by hydrolysis and condensation reaction using boehmite sol and methyltrimethoxysilane as a function of aging-time. The coating slurry was composed of a plate-shape alumina in the sol-gel binder for the EPD process, in which particles dispersed in the slurry were deposited on the electrode under an electric field due to the surface charge. We studied the effects of three parameters: the content of boehmite, the aging time, and the applied voltage, on the physical, thermal, and electrical properties of the hybrid composite films by EPD. The amount of boehmite was 10 ~ 20 wt% and the aging time was 0.5 ~ 72, with a fixed amount of plate-shape alumina of 10 wt%. The condition of applied voltage was 5 ~ 30 V with a distance of 2 cm between the electrode during the EPD process. We confirmed that a structure of hybrid composite films of well-ordered plate alumina was deposited on the substrate when the film was prepared using a sol-gel binder composed of 15 wt% boehmite with 1 hr aging time and EPD at 10 V. The process shows a weight loss of 7% at $500^{\circ}C$ in TGA and a breakdown voltage of 8 kV at $87{\mu}m$.

• 한국건설관리학회논문집
• /
• 제13권3호
• /
• pp.3-13
• /
• 2012

1960년대 이후 국내의 도심은 수도권 중심의 개발로 인한 집중화, 과밀화, 기반시설의 노후화 및 상업 기능의 쇠퇴 등 사회, 경제, 환경적 문제들이 발생하였으며, 2000년대 들어 각종 도시 문제를 해결하기 위해 도시재생사업이 대두되었다. 그러나 현재 도시재생사업은 다양한 용도의 복합화 시설을 추구하고 있으며 사업의 특성상 다수의 참여주체, 사업의 장기화 등으로 인해 업무 프로세스가 복잡해지고 있다. 이런 현상으로 수행업무가 체계화되지 못해 사업 참여자들은 사업을 진행하는 데 있어 참여자간의 복잡한 이해관계, 업무협업 등의 어려움을 겪고 있다. 이러한 문제점을 해결하기 위해 여러 기관에서 도시재생사업 관련 정보 시스템을 제공하고 있지만 사업 세부내용을 체계적으로 제공하는데 한계가 있다. 이에 본 연구에서는 도시재생사업의 현황 및 업무프로세스를 분석하고 업무정보관리의 체계성의 필요성을 제시하였다. 또한 도시재생사업 업무정보 체계 정립을 위해 BPS(Business Process Breakdown Structure, 이하 BPS)의 개념을 도입하여 사업진행을 위한 업무 정보를 분류하고 체계화 하였다. 이를 토대로 BPS기반의 도시재생사업 업무정보 시스템을 구현하고 시스템의 사용성을 평가하였다. 본 연구를 통해 BPS기반의 도시재생사업 업무정보 시스템을 구축함으로써 사업 참여자들에게 체계적인 도시재생사업관련 업무정보를 제공하여 효과적인 사업을 진행하는데 도움을 줄 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.45-45
• /
• 2007

Capacitors among the embedded passive components are most widely studied because they are the major components in terms of size and number and hard to embed compared with resistors and inductors due to the more complicated structure. To fabricate a capacitor-embedded PCB for in-line process, it is essential to adopt a low temperature process (<$200^{\circ}C$). However, high dielectric materials such as ferroelectrics show a low permittivity and a high dielectric loss when they are processed at low temperatures. To solve these contradicting problems, we studied BMN materials as a candidate for dielectric capacitors. processed at PCB-compatible temperatures. The morphologies of BMN thin films were investigated by AFM and SEM equipment. The electric properties (C-F, I-V) of Pt/BMN/Cu/polymer were evaluated using an impedance analysis (HP 4194A) and semiconductor parameter analyzer (HP4156A). $Bi_2Mg_{2/3}Nb_{4/3}O_7$(BMN) thin films deposited on copper clad laminate substrates by sputtering system as a function of Ar/$O_2$ flow rate at room temperature showed smooth surface morphologies having root mean square roughness of approximately 5.0 nm. 200-nm-thick films deposited at RT exhibit a dielectric constant of 40, a capacitance density of approximately $150\;nF/cm^2$, and breakdown voltage above 6 V. The crystallinity of the BMN thin films was studied by TEM and XRD. BMN thin film capacitors are expected to be promising candidates as embedded capacitors for printed circuit board (PCB).

• 한국건설관리학회논문집
• /
• 제17권2호
• /
• pp.99-109
• /
• 2016

건설 프로젝트에서 발생하는 다양한 정보를 통합관리하기 위한 BIM의 실무활용이 확산되고 있으며, 활용 형태 또한 점차 고도화되고 있다. 이에 건축 및 플랜트산업에서 BIM 환경구축을 위해 다양한 BIM 소프트웨어들이 사용되고 있으나, 정보 호환성 및 통합성 부족은 주요 장애요인으로 지적되고 있다. 이러한 배경에서, 본 연구에서는 사용자정의 속성정보 (GBS)를 기반으로 한 BIM 활용의 기능적 고도화 및 업무효율화 방안을 검증하기 위해 BIM 소프트웨어간 호환성 테스트를 실시하였다. 호환성 테스트 결과, 'BIM 시스템 관점'에서는 Viewer Tool과 Simulation Tool이 Authoring Tool에 비해 정보 호환성이 전반적으로 높았으며, 'BIM 정보 관점'에서는 사용자정의 속성정보 (GBS)의 호환성이 시스템 기본 속성정보 및 Logic 정보보다 높았다. 즉, 도형정보와 비도형정보의 연계 자동화를 가능케하는 GBS의 적용을 통해 BIM 활용의 기능적인 고도화 및 업무부담 최소화가 가능하며, 또한, 추후 사용자정의 속성정보를 활용한 도형과 다양한 비도형정보와의 정보연계에 대한 연구가 이뤄진다면, 건설 프로젝트의 통합관리에 한층 가까워질 것이라 기대된다.

• 대한화장품학회지
• /
• 제30권1호
• /
• pp.59-62
• /
• 2004

본 연구는 다양한 종류의 에멀젼에 전단응력을 가하며 그때 일어나는 에멀젼의 상 변이를 전기, 유변학적 특징을 통해 실시간으로 측정해보는 것이다. 전기 전도도의 변화는 자체 제작한 JELL $I^{TM}$ (Joint Electro-rheometer for Liquid-Liquid Inversion) 칩을 이용하였으며, 동시에 유변물성측정장치(rheometer)를 이용하여 유변물성의 변화를 측정하였다. JELL $I^{TM}$ 과 인조 피부를 유변물성측정장치 사이에 장착하고 그 사이에 다양한 종류의 에멀젼을 얇게 발라준 후, 일정한 전단응력을 주며 시간에 따른 저항과 전도값의 변화를 측정하였다. O/W 제형의 경우 시간에 따라 저항값이 커지는 경향을 보였으며 저항값은 내부 상이 많을 수록 더 급격한 변화를 나타냈다. 이때의 점도 변화를 보면, 저항값의 변화가 클수록 점도의 변화도 큼을 볼 수 있었다. 이것은 내부 상의 파괴로 인해 외부의 힘에 저항하는 힘이 약해졌기 때문이라고 예상된다. 이런 결과를 이용하여 전단응력에 의한 에멀젼 상 변이 특성과 정도를 실시간, 정량적 비교할 수 있었다., 정량적 비교할 수 있었다.