• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.135-137
• /
• 2014

Excess enthalpy flame propagating an porous inert medium, which recirculate exhaust heat to the upstream cold mixture, is theoretically analyzed. Using the activation-energy asymptotics, the flame structure is divided into the thin reaction and the gas-phase preheat zone, as is traditionally done. Ahead and behind of the two, there exist an outer preheat zone, where heat is convectively transferred from solid to gas, and a downstream re-equilibrium zone, where thermal equilibrium between phases is established. Asymptotic solutions of species and energy equations in each zone are obtained and then matched to each other, and finally the mass burning rate is obtained as a function of the flame propagation velocity with respect to the solid phase and physical properties of gas and solid.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.6
• /
• pp.776-784
• /
• 2009

The function of DIRCM(Directed Infrared Countermeasures) jamming is to cause the missile to miss its intended target by disturbing the seeker tracking process. The DIRCM jamming uses the pulsing flashes of IR energy and its frequency, phase and intensity have influence on the missile guidance system. In this paper, we analysis the DIRCM jamming effect of spin-scan reticle seeker. Simulation results show that the jamming effect is greatly influenced by frequency, phase and intensity of the jammer signal.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.2
• /
• pp.77-83
• /
• 2001

The thermal characteristics of solid nitrogen are investigated by experiment and analysis for the purpose of evaluating its feasibility as a cooling medium for HTS (high T$_{c}$ superconductor) magnets. A cryostat to refrigerate a liquid-nitrogen container well below its freezing temperature with a 2-stage GM cryocooler is designed and constructed. The spatial distribution of temperature is measure as a function of time during the freezing and melting processes. from which the thermal diffusivity of solid nitrogen can be approximately calculated. the freezing process is formulated and solved by the integral method with an assumption of phase equilibrium at the solid-liquid interface and experimental observation. It may be concluded that the thermal diffusion in solid phase is much slower than in liquid and the degree of super-saturation is quite severe in the solidification of nitrogen.n.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.231-239
• /
• 2009

The purpose of this study was to investigate changes in balance and upper extremity (UE) function associated with reaching training for children with quadriplegic cerebral palsy based on Biomechanical Frame of Reference. The baseline (phase A) lasted one week. The therapeutic protocol consisted of three reaching training (Phase B) for 40 minutes three times a week. Intervention phases lasted 4 weeks. The CMS-70P (Zebris Medizintechnik Gmbh, Germany) was used to evaluate the qualitative changes in UE function and Pediathc Berg Balance Scale was used to test the balance. The observed performance changes seem to be associated with the presence of intervention and suggest that biomechanical training can be a useful intervention to improve not only manual function but also balance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.37-45
• /
• 1982

This paper is a sequel of the Part I paper[1] on the modified digital Costas loop. In this Part II we analyze the performance of the system in the presence of noise. It is shown that, when the input signal is corrupted by additive white Gaussian noise, the noise process in the loop becomes Rician as a result of the tan-1 (.) function of the phase error detector. Steady state probability density functions of phase errors of the first-and second-order loops have been obtained by solving the Chapman-Kolmogorov equation numerically. Also, the mean and variance of phase error in the steady state have been obtained analytically, and are compared with the results obtained by computer simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.431-434
• /
• 2001

The mechanical and phase transformation of the cold isostatically pressed $\alpha$-SiC ceramic were investigated as a function of the sintering temperature. The result of phase analysis by XRD revealed 6H, 4H, 3C and phase transformation between 6H and 4H showed a sudden change over 200$0^{\circ}C$. However, the alongrightarrow$\beta$ reverse transformation did not occur to any sintering temperature. The relative density and the mechanical properties of $\alpha$-SiC ceramic was increased with increased sintering temperature. The flexural strength rapidly inclosed below 210$0^{\circ}C$ and showed the highest value of 410 MPa at 220$0^{\circ}C$. This reason is because crack was propagated through surface flaw. The fracture toughness showed the highest value of 3.3 MPa.m$_{1}$2/ at 220$0^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.689-692
• /
• 2001

In this paper, the pizoelectric and dielectric properties of 0.95Pb(ZrxTil-x)O$_3$- 0.05Pb(Mn$\_$0.2/Fe$\_$0.4/W$\_$0.4/)O$_3$piezoelectric ceramics is investigated as a function of Zr/Ti mole ratio. Also, MPB(Morphotropic Phase Boundary) and optimal sintering temperature is studied using XRD and SEM. As a results, when Zr/Ti mole ratio is 52/48, electromechanical coupling factor, k$\_$p/, is 58[%], permittivity, $\varepsilon$$\^$T/$\_$33//$\varepsilon$0, is 1360 and piezoelectric strain constant, d$\_$33/ is 265[pC/N] and the piezoelectric and dielectric properties become maximum. Phase transition temperature of its ternary piezoelectric system is about 350[$^{\circ}C$]. From the XRD analysis, when Zr/Ti mole ratio is 52/48, tetragonal phase transits to rhombohedral phase. Also, From measuring results of the sintering density, when sintering temperature is 1050[$^{\circ}C$], sintering density become maximum and is about 7930[kg/㎥], and average grain size is about 2-3[$\mu\textrm{m}$].

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.277-286
• /
• 2010

In this paper amplitude and phase distortion of the received signal through a fading channel results in a severe performance degradation of the communication system, Therefore we consider the variance of the maximum a posteriori phase estimate of sinusoidal signal by the Cramer-Rao bound in wireless fading channel. To find the Cramer-Rao lower bound for the variance of the phase, We use the derived probability density function(pdf) of the phase in Nakagami fading channel. We analyze the error performance of modulation signals using order statistics on generalized combining reception and find adequate diversity branch number.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2008

One of the problems for implementing the spot detection phase in the 2-DE gel image analysis program is the eliminating noises in the image. Remained noises after the preprocessing phase cause the over-segmented regions by the segmentation phase. To identify and exclude the over-segmented background regions, if we use the fixed thresholding method that is choosing an intensity value for the threshold, the spots that is invisible by the eyes but mean a very small amount proteins which have important role in the biological samples could be eliminated. This paper propose an adaptive thresholding method that come from an idea that is got on statistical analysing for the prominences of the peaks. The adaptive thresholding method works as following. Firstly we calculate an average prominence value curve and fit it to exponential function curve, as a result we get parameters for the exponential function. And then we calculate a threshold value by using the parameters and probability distribution of errors. Lastly we apply the threshold value to the region for determining the region is a noise or not. According to the probability distribution of errors, the reliability is 99.85% and we show the correctness of the proposed method by representing experiment results.

• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.45-56
• /
• 2023

Vibration-based structural health monitoring is used to ensure the safety of structures by installing sensors in structures. The peak picking method, one of the applications of vibration-based structural health monitoring, is a method that analyze the dynamic characteristics of a structure using the peaks of the frequency response function. However, the results may vary depending on the person predicting the peak point; further, the method does not predict the exact peak point in the presence of noise. To overcome the limitations of the existing peak picking methods, this study proposes a new method to automate the modal analysis process by utilizing long short-term memory, a type of recurrent neural network. The method proposed in this study uses the time series data of the frequency response function directly as the input of the LSTM network. In addition, the proposed method improved the accuracy by using the phase as well as amplitude information of the frequency response function. Simulation experiments and lab-scale model experiments are performed to verify the performance of the LSTM network developed in this study. The result reported a modal assurance criterion of 0.8107, and it is expected that the dynamic characteristics of a civil structure can be predicted with high accuracy using data without experts.