• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.345-351
• /
• 2016

This study was carried out to determine an optimal lean $NO_x$ trap (LNT) regeneration condition based on a $NO_x$ storage fraction. The LNT regeneration was performed by an in-cylinder post fuel injection method. A $NO_x$ storage fraction is defined by the ratio of current cumulated $NO_x$ amount in the LNT to the $NO_x$ storage capacity: 0 means empty and 1 fully loaded. In this study five engine operating conditions were chosen to represent the New European Driving Cycle. With various $NO_x$ storage fractions each engine operating condition, the LNT regeneration was executed and then $NO_x$ conversion efficiency, additional fuel consumption, CO and THC slip, peak catalyst temperature were measured. The results showed that there exist an optimal condition to regenerate the LNT, eg. 1500 rpm 6 bar BMEP with below 0.7 $NO_x$ storage fraction in this experimental constraint.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.519-525
• /
• 2015

Positive bias stress-induced instability in amorphous indium-gallium-zinc-oxide (a-IGZO) bottom-gate thin-film transistors (TFTs) was investigated under high $V_{GS}$/low $V_{DS}$ and low $V_{GS}$/high $V_{DS}$ stress conditions through incorporating a forward/reverse $V_{GS}$ sweep and a low/high $V_{DS}$ read-out conditions. Our results showed that the electron trapping into the gate insulator dominantly occurs when high $V_{GS}$/low $V_{DS}$ stress is applied. On the other hand, when low $V_{GS}$/high $V_{DS}$ stress is applied, it was found that holes are uniformly trapped into the etch stopper and electrons are locally trapped into the gate insulator simultaneously. During a recovery after the high $V_{GS}$/low $V_{DS}$ stress, the trapped electrons were detrapped from the gate insulator. In the case of recovery after the low $V_{GS}$/high $V_{DS}$ stress, it was observed that the electrons in the gate insulator diffuse to a direction toward the source electrode and the holes were detrapped to out of the etch stopper. Also, we found that the potential profile in the a-IGZO bottom-gate TFT becomes complicatedly modulated during the positive $V_{GS}/V_{DS}$ stress and the recovery causing various threshold voltages and subthreshold swings under various read-out conditions, and this modulation needs to be fully considered in the design of oxide TFT-based active matrix organic light emitting diode display backplane.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.704-711
• /
• 2006

Vibration test on MAST(multi axial simulation table) system has several advantage over one-axial vibration test that could simulate 6-DOF, 3-axial translation and 3-axial moment, at the same time. Since field vibration motion can be fully represented with 6-DOF, multi-axial vibration test on vehicle component is widely conducted in technical leading companies to make sure its fatigue performance in vibration environment. On the way to fulfill the process, editing technique of obtained field data is key issue to success a reliable vibration testing with MAST system. Since the original signals are not only too large to fulfill it directly, but all of the measured data is not guarantee its convergency on generating its driving files, editing technique of the original signals are highly required to make some events that should meet the equal fatigue damage on the target component In this paper, key technique on editing a field data feasible for MAST system is described based on energy method in vibration fatigue. To explain its technique explicitly, author first introduced a process on field data acquisition of two vehicle component and then, representing events are produced to keep up with the editing strategy about a energy method. In the final chapter, a time information regarding a vibration test on MAST system is derived from the energy data which is critical information to perform a vibration test.

• Korean Journal of Agricultural Science
• /
• v.44 no.2
• /
• pp.272-282
• /
• 2017

In Bangladesh, since the beginning of 21st century, the poultry industry has become an unparalleled platform for a quick profit, the generation of local employment, and the production of cheaper animal proteins. This paper summarizes poultry industry-related facts and figures for Bangladesh, starting from the very beginnings of this sector when poultry farming was part of subsistence family farming only to today's highly commercialized horizon, through personal experiences, secondary data analysis, spot visits, and the sharing of views and ideas with stakeholders. A critical analysis reveals that the poultry industry in Bangladesh may become multi-dimensional and more stable in the near future as it establishes sufficient backward and forward linkages to input and output supplies. We can foresee its passing the very fast growing juvenile stages of higher net profit earning and less responsible then becoming fully mature. The projected demand and production potentials of this sector are increasing, but at a slower pace than before, in the face of some important challenges like emerging disease, higher prices of inputs, consumer preferences, and strong market competition. However, evidence suggests that the production systems of poultry in Bangladesh are entering a new era to cater to the needs of consumers, society, and government as it produces healthier and more diversified, further-processed foods, in the coming years. A better economy in the country, a more health-conscious population, and the availability of new and affordable innovations in this sector might be the driving forces to support the foreseen transformations.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.175-182
• /
• 2017

Background: With the recent rapid industrialization, occupational safety and health (OSH) has become an important issue in all industrial and human activities. However, incidents of injuries and fatality rates in the Ghanaian industry sector continue to increase. Despite this increase, there is no evidence regarding the element of OSH management in transport activities in Ghanaian industries. Thus, this study aims to examine the perceptions regarding the importance of safety and health in work-related transport activities in Ghanaian industries. Methods: A survey data collection technique was used to gather information on best safety practices over a 5-month period. We randomly selected 298 respondents from industries to answer structured questionnaires. The respondents included drivers, transport managers, and safety engineers. Standard multiple regression model and Pearson product-movement correlation were used to performed the analysis. Results: The result shows that for interventions to improve safety and health, concentration has been on drivers' safety practice with less attention to safe driving environments and vehicle usage. Additionally, the respondents are aware of the importance of OSH in transport activities, but the level of integration does not measure up to the standard to reduce operational accidents and injuries. Finally, strong commitment to changing unsafe practices at all levels of operations appears to be the effective way to improve safety situations. Conclusion: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.3
• /
• pp.304-308
• /
• 2010

This study compared and analyzed existing studies and released papers to identify the "definition and scope of urban agriculture" which correspond to the circumstances of Korea based on the fact that urban agriculture was selected as one of the measures to pursue green growth by the Presidential Committee on Green Growth (PCGG) and the discussions and deliberations among PCGG, government, academia, civic organizations, and experts. It also aims to present the ways of policy to facilitate the development of urban agriculture based on the mentioned identification. This research proposes the definition of urban agriculture as 'all agricultural activities that incorporates multi-functional public benefits of agriculture performed within the administrative district of a city. However, the scope of urban agriculture should exclude the agricultural sites, the methods, and the activities that are against the multi-functional public benefits of agriculture, which will be determined depending on the spaces, methods, and purposes of planting food crops. In order to facilitate the development of urban agriculture, the government should implement the policy measures as following: (1) to analyze spaces for farming, and provide the spaces to the citizens; (2) to prepare legislation and institution that will allow citizens to use the farming spaces continuously; (3) to develop Korean-style urban agriculture model that fully reflects the features of Korean cities; (4) to develop a system where the urban citizens can easily learn and experience the urban agriculture; and, (5) to provide incentives that will attract active participation of urban citizens such as carbon mileage. (6) to analyze effect of urban agriculture to save energy and food self-sufficiency.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.6 no.2
• /
• pp.303-326
• /
• 2000

Only one hundred years of history in nursing education in Korea is not enough to develop the subject fully as a science. However, the development of Korean nursing education is a great historical event, because Korean nursing education has been accepted by a male-oriented Korean society and has led to a new paradigm in the new millenium. These results are largely due to the Korean people's high enthusiasm for education, as well as Korean women's diligence. I think these 100 years of history can be divided into five periods: (1) the Sunlight period (1900-1911) (2) the New born period (1912-1945) (3) the Settle-down period (1946-1960) (4) the Marked Growth period (1961-1980) (5) the Jumping Period (1981-2000) These classifications are characterized by changes in the educational system, a changed nursing curriculum, educational goals, educational outcomes, and implications. The characteristics of historical development of Korean nursing education was evaluated in three dimensions: structures, contents, and outcome. The structure of Korean nursing education consists of a 3-year program and a 4-year program. Most nursing leaders in Korea hope that these two programs will converge into one system. Secondly, the contents of nursing education in Korea underwent very active changes, according to historical development. These changes in the nursing curriculum have been developed to provide a professional education and develop nursing education as a modern science. Lastly, as to the results of nursing education in Korea, the education was needed to turn out advanced specialists in nursing. In the new millenium, knowledge and information will be the driving forces behind social development. A nation's level of development and creativity in nursing education is the most potent determinant of the future of Korean nursing. The best way to prepare for future challenges will be to create the backbone of a nursing education system. Hence, well-educated nurses in graduate programs should be turned into advanced specialists in nursing. These groups will upgrade the image of Korean nurses, and will have strong influence to improve patient care and the health situation in Korea.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.125-131
• /
• 2001

This paper presents a application of vector control strategy to 1.2MVA traction drive for railway vehicle. The vector control required the control of the phase and amplitude of output voltage vector. But in case of traction system for railway vehicle, the one-pulse mode is used at high speed region in order to utilize the link voltage fully. So it is impossible to control the flux and torque axis current instantaneously and independently in the region. So this paper proposes a mixed control algorithm, where the vector control strategy at low speed region and slip-frequency control strategy at high speed region is used. And precise switching technique between the two different control strategy is proposed. The proposed strategy is verified by experimental results with a 1.2MVA traction drive system with four 210kW induction motors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.764-769
• /
• 2006

Vibration test on MAST(multi axial simulation table) system has several advantage over one-axial vibration test that could simulate 6-DOF, 3-axial translation and 3-axial moment, at the same time. Since field vibration motion can be fully represented with 6-DOF, multi-axial vibration test on vehicle component is widely conducted in technical leading companies to make sure its fatigue performance in vibration environment. On the way to fulfill the process, editing technique of obtained field data is key issue to success a reliable vibration testing with MAST system. Since the original signals are not only too large to fulfill it directly, but all of the measured data is not guarantee its convergency on generating its driving files, editing technique of the original signals are highly required to make some events that should meet the equal fatigue damage on the target component In this paper, key technique on editing a field data feasible for MAST system is described based on energy method in vibration fatigue. To explain its technique explicitly, author first introduced a process on field data acquisition of two vehicle component and then, representing events are produced to keep up with the editing strategy about a energy method. In the final chapter, a time information regarding a vibration test on MAST system is derived from the energy data which is critical information to perform a vibration test.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.237-249
• /
• 2014

Deposition of amyloid-${\beta}$ ($A{\beta}$) proteins is the conventional pathological hallmark of Alzheimer's disease (AD). The $A{\beta}$ protein formed from the amyloid precursor protein is predominated by the 40 residue protein ($A{\beta}40$) and by the 42 residue protein ($A{\beta}42$). While $A{\beta}40$ and $A{\beta}42$ differ in only two amino acid residues at the C-terminal end, $A{\beta}42$ is much more prone to aggregate and exhibits more neurotoxicity than $A{\beta}40$. Here, we investigate the molecular origin of the difference in the aggregation propensity of these two proteins by performing fully atomistic, explicit-water molecular dynamics simulations. Then, it is followed by the solvation thermodynamic analysis based on the integral-equation theory of liquids. We find that $A{\beta}42$ displays higher tendency to adopt ${\beta}$-sheet conformations than $A{\beta}40$, which would consequently facilitate the conversion to the ${\beta}$-sheet rich fibril structure. Furthermore, the solvation thermodynamic analysis on the simulated protein conformations indicates that $A{\beta}42$ is more hydrophobic than $A{\beta}40$, implying that the surrounding water imparts a larger thermodynamic driving force for the self-assembly of $A{\beta}42$. Taken together, our results provide structural and thermodynamic grounds on why $A{\beta}42$ is more aggregation-prone than $A{\beta}40$ in aqueous environments.