• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.776-777
• /
• 2006

The powder forging (PF) process is used to produce fully dense powder metallurgy (PM) parts for high performance automotive applications. PF connecting rods have been widely accepted in the US, Japan, and other countries due to higher performance and lower manufacturing costs when compared to conventionally forged steel connecting rods [1]. In order to meet and exceed requirements for higher fatigue strength and better machinability of PF connecting rods, a newly developed machinability enhancer, named KSX, was introduced [2]. A comparison study between powder forged materials prepared with 0.3% MnS and with 0.1% KSX additions showed excellent properties in the case of the mix with KSX.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1487-1492
• /
• 2007

In this paper, we apply a forging simulator to automatic simulation of a connecting-rod forging process and compare its results with others found in the literature. The process information comes from the distributed examples of DEFORM3D. The process is fully automatically simulated using the tetrahedral element capability of AFDEX3D, developed by the authors. Our results are compared with the results found from the related literature, already simulated using DEFORM3D by other researchers. The comparison shows that our results are relatively excellent especially in terms of mesh quality on which the solution accuracy depends mainly.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.343-356
• /
• 2016

As the common cast-in-place construction works fails to meet the enormous construction demand under rapid economic growth, the development of prefabricated structure instead becomes increasingly promising in China. For the prefabricated structure, its load carrying connection joint play a key role in maintaining the structural integrity. Therefore, a novel end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column was proposed. Under action of low cycle repeated horizontal loadings, comparative tests are conducted on 6 prefabricated pre-stressed intermediate joint specimens and 1 cast-in-place joint specimen to obtain the specimen failure modes, hysteresis curves, skeleton curves, ductility factor, stiffness degradation and energy dissipation capacity and other seismic indicators, and the seismic characteristics of the new-type prefabricated beam-column connecting joint are determined. The test results show that all the specimens for end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column have realized the design objectives of strong column weak beam. The hysteretic curves for specimens are good, indicating desirable ductility and energy dissipation capacity and seismic performances, and the research results provide theoretical basis and technical support for the promotion and application of prefabricated assembly frames in the earthquake zone.

• 한국실내디자인학회논문집
• /
• 제19권5호
• /
• pp.130-139
• /
• 2010

The urban style compact apartment which appeared at the end of 1990's was developed by the decrement of household members and in compliance with a new life style. Now it has its own market as a new trend. The purpose of this study is to better understand the characteristics of urban style compact apartments based on an analysis of apartments actually sold on 2008, in order to reflect on the future directions and developments. To support a comprehensive analysis, this study considered three types of compact apartments developed by : a. major developers which own multiple well-recognized brand names, b. mid-size developers under general brand names, c. new or small-size developers specializing in compact apartments. The results from 21 urban style compact apartments could be summarized as follow; 1. Most buyers are Singles or DINKs. The single women occupy a large percentage. 2. Condition of good location is under 5 minutes walk to station and accessibility to 2 and more station. 3. Exterior of building should be harmonious to surrounding and simple, the atmosphere of entrance hall should be warm and relaxed. 4. The spatial character of unit plans are developed by the ways of connecting spaces; 1) Connecting spaces by mobile partition: flexible spaces with expansion 2) Connecting spaces by hall: well arranged spaces with excursion and extends 5. The equipments of kitchen and security are fully carefully planned.

• 대한전기학회논문지
• /
• 제33권9호
• /
• pp.347-354
• /
• 1984

This paper presents a method of improving the power factor and , the waveform of A.C line currents and the output waveforms of AC to DC fully bridge converter systems which is achieved by connecting CON I.II and CON III.IV in series and parallel. The basic principle of the CON I.II.III.IV's operation is simple and feasibility of thease converter is proved by experiments. CON I and CON III are constructed of natural commutation, CON II and CON IV are constructed of forced commutation. The experimental results show that the power factor and waveform of the source currents and the output waveforms are improved by the method of connecting converter in series and parallel and driving it in I, II, III, IV quadrant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.395-397
• /
• 1999

This paper presents a method of improving the power factor and the waveform of A.C line currents and the out waveforms of AC to DC fully bridge converter systems which is achieved by connecting converters in series and parallel. The results of simulation show that the power factor and the source voltage and current waveforms are improved by the method of connecting converter in series, and the controlled input voltage and current waveform using a current limit controller.

• Genomics & Informatics
• /
• 제17권2호
• /
• pp.13.1-13.3
• /
• 2019

The usage of controlled biomedical vocabularies is the cornerstone that enables seamless interoperability when using a common data model across multiple data sites. The Observational Health Data Science and Informatics (OHDSI) initiative combines over 100 controlled vocabularies into its own. However, the OHDSI vocabulary is limited in the sense that it combines multiple terminologies and does not provide a direct way to link them outside of their own self-contained scope. This issue makes the tasks of enriching feature sets by using external resources extremely difficult. In order to address these shortcomings, we have created a linked data version of the OHDSI vocabulary, connecting it with already established linked resources like bioportal, bio2rdf, etc. with the ultimate purpose of enabling the interoperability of resources previously foreign to the OHDSI universe.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.491-497
• /
• 2010

This paper proposes an estimation algorithm for the electrical parameters of synchronous reluctance motors (SynRMs) by using a synchronous PI current regulator at standstill. In reality, the electrical parameters are only measured or estimated in limited conditions without fully considering the effects of the switching devices, connecting wires, and magnetic saturation. As a result, the acquired electrical parameters are different from the real parameters of the motor drive system. In this paper, the effects of switching devices, connecting wires, and the magnetic saturation are considered by simultaneously using the short pulse and closed loop equations of resistance and synchronous inductances. Therefore, the proposed algorithm can be easily and safely implemented with a reduced measuring time. In addition, it does not need any external or additional measurement equipment, information on the motor's dimensions, and material characteristics as in the case of FEM. Several experimental results verify the effectiveness of the proposed algorithm.

• Steel and Composite Structures
• /
• 제20권1호
• /
• pp.21-41
• /
• 2016

Cold-formed steel structures are increasingly attractive due to their benefits of good mechanical performance and constructional advantages. However, this type of construction is still not fully exploited as a result of the acknowledged difficulties involved in forming construction-efficient and cost-effective connections. Furthermore, there is a lack of information on the structural behavior of the cold-formed steel connections. In this study, the research on various cold-formed steel connections was comprehensively reviewed from both fundamental and structural points of view, based on the available experimental and analytical data. It reveals that the current design codes and guidelines for cold-formed steel connections tend to focus more on the individual bearing capacity of the fasteners rather than the overall structural behavior of the connections. Significant future work remains to be conducted on the structural performance of cold-formed steel connection. In addition, extensive previous research has been carried out to propose and evaluate an economical and efficient connection system that is obtained from the conventional connecting techniques used in the hot-rolled industry. These connecting techniques may not be suitable, however, as they have been adopted from hot-rolled steel portal frames due to the thinness of the sheet in cold-formed steels. The review demonstrates that with the increasing demand for cold-formed steel constructions throughout the world, it is crucial to develop an efficient connection system that can be prefabricated and easily assembled on site.

• 한국컴퓨터정보학회논문지
• /
• 제19권11호
• /
• pp.81-90
• /
• 2014

긴급 구호가 필요한 재난지역 등에서 디바이스를 유, 무선, 모바일 네트워크로 연결하여 특정 정보를 공유하거나 필요한 동작의 제어를 위해, 들로네 삼각망을 이용하여 연결거리 내에 있는 노드들을 신속히 연결하는 효율적인 긴급 연락망 생성 방법을 제안한다. 제안된 방법은 기존의 naive 방법에 비해 긴급 연결망의 전체 길이는 동일하지만 인접 노드간의 최대 연결 가능 길이가 길수록 연락망 구성시간 측면에서 매우 우수한 성능을 보였다. 입력노드의 수가 10000, 최대 연결 가능 길이가 5인 실험에서 본 논문에서 제안하는 방법은 naive 방법에 비해 긴급 연락망의 전체 연결 길이 증가 없이 실행시간이 89.1% 개선되었다. 이는 통신 능력이 지속적으로 개선되고 있는 환경에서 인접 디바이스간의 신속한 통신망 구축, 사물인터넷, 센서 네트워크 라우팅 등에 잘 적용될 수 있다.