• Journal of Magnetics
• /
• 제20권1호
• /
• pp.1-7
• /
• 2015

We investigated the half-metallicity and magnetism at the (001) and (110) surfaces of YC in zinc-blende structure by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. From the calculated local density of states, we found that neither (001) nor (110) surface preserves the half-metallicity. While the magnetic moment of Y atom in the YC bulk is $0.116{\mu}_B$, it is $0.057{\mu}_B$ at the topmost layer of Y-terminated (001) surface. On the contrary, C-terminated (001) YC surface exhibits stronger magnetism than the bulk structure; the calculated magnetic moment on topmost C atom is $1.084{\mu}_B$, while that of C atom in the bulk structure is $0.423{\mu}_B$. The magnetic properties of the non-polar (110) YC surface are slightly enhanced as compared with the bulk structure.

• 대한조선학회지
• /
• 제13권2호
• /
• pp.13-43
• /
• 1976

A potential flow approach is used to develop a method and an associated computer program for floating marine structures of general configuration in wave of all water depths with arbitrary heading. It computes the total force distributions and six degrees-of-freedom motion. The hydrodynamic-force equations and derived become identical under certain assumptions to the equations commonly used by the offshore industry, and the two methods are compared in detail. The computed motions of all six degree agree quite well with model-scale and full-scale experimental data for two typical semisubmersible drilling rigs in finite-depth water. Also the presented motion computations are more accurate than a previous work by the second approach. The present computations use experimentally validated or determined values of frequency-dependent hydrodynamic coefficients with the effects of the free surface and both finite and infinite water depths. The present method generates sufficient computation accuracy to use for practical design applications.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 1996년도 10월 학술대회지
• /
• pp.435-447
• /
• 1996

In this paper, we propose the method that extracts the speech feature using the hearing model through signal processing techniques. The proposed method includes the following procedure ; normalization of the short-time speech block by its maximum value, multi-resolution analysis using the discrete wavelet transformation and re-synthesize using the discrete inverse wavelet transformation, differentiation after analysis and synthesis, full wave rectification and integration. In order to verify the performance of the proposed speech feature in the speech recognition task, korean digit recognition experiments were carried out using both the DTW and the VQ-HMM. The results showed that, in the case of using DTW, the recognition rates were 99.79% and 90.33% for speaker-dependent and speaker-independent task respectively and, in the case of using VQ-HMM, the rate were 96.5% and 81.5% respectively. And it indicates that the proposed speech feature has the potential for use as a simple and efficient feature for recognition task

• Structural Engineering and Mechanics
• /
• 제12권1호
• /
• pp.51-69
• /
• 2001

Whereas the potential of static inelastic analysis methods is recognised in earthquake design and assessment, especially in contrast with elastic analysis under scaled forces, they have inherent shortcomings. In this paper, critical issues in the application of inelastic static (pushover) analysis are discussed and their effect on the obtained results appraised. Areas of possible developments that would render the method more applicable to the prediction of dynamic response are explored. New developments towards a fully adaptive pushover method accounting for spread of inelasticity, geometric nonlinearity, full multi-modal, spectral amplification and period elongation, within a framework of fibre modelling of materials, are discussed and preliminary results are given. These developments lead to static analysis results that are closer than ever to inelastic time-history analysis. It is concluded that there is great scope for improvements of this simple and powerful technique that would increase confidence in its employment as the primary tool for seismic analysis in practice.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.1-5
• /
• 2016

We investigated the half-metallicity and magnetism at the (001) and (110) surfaces of CsSe in cesium chloride and zinc-blende structures by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. From the calculated local density of states, we found that all the surfaces preserve the half-metallicity of the bulk structures. The surfaces with a greater polarity have stronger ferromagnetic properties when terminated with Se atoms; the non-polar surfaces do not change their electronic or magnetic properties considerably as compared with the bulk structures.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권1호
• /
• pp.1-6
• /
• 2002

A new closed-form expressions to calculate frequency-dependent distributed inductance and the associated distributed series resistance of single interconnect on a lossy silicon substrate (CMOS technology) are presented. The proposed analytic model for series impedance is based on a self-consistent field method and the vector magnetic potential equation. It is shown that the calculated frequency-dependent distributed inductance and the associated resistance are in good agreement with the results obtained from rigorous full wave solutions and CAD-oriented equivalent-circuit modeling approach.

• 대한의용생체공학회:의공학회지
• /
• 제35권5호
• /
• pp.151-159
• /
• 2014

Computed tomography (CT) is one of the most widely used medical imaging modality. However, substantial x-ray dose exposed to the human subject during the CT scan is a great concern. Region-of-interest (ROI) CT is considered to be a possible solution for its potential to reduce the x-ray dose to the human subject. In most of ROI-CT scans, the ROI is set to a circular shape whose diameter is often considerably smaller than the full field-of-view (FOV). However, an arbitrarily shaped ROI is very desirable to reduce the x-ray dose more than the circularly shaped ROI can do. We propose a new method to make a non-circular convex-shaped ROI along with the image reconstruction method. To make a ROI with an arbitrary convex shape, dynamic collimations are necessary to minimize the x-ray dose at each angle of view. In addition to the dynamic collimation, we get the ROI projection data with slightly lower sampling rate in the view direction to further reduce the x-ray dose. We reconstruct images from the ROI projection data in the compressed sensing (CS) framework assisted by the exterior projection data acquired from the pilot scan to set the ROI. To validate the proposed method, we used the experimental micro-CT projection data after truncating them to simulate the dynamic collimation. The reconstructed ROI images showed little errors as compared to the images reconstructed from the full-FOV scan data as well as little artifacts inside the ROI. We expect the proposed method can significantly reduce the x-ray dose in CT scans if the dynamic collimation is realized in real CT machines.

• 한국자기학회지
• /
• 제15권1호
• /
• pp.7-11
• /
• 2005

비자성 전이금속인 Rh 여러 층 사이에 자성 전이금속인 Ni 한층을 넣은 4Rh/Ni/4Rh(001) 계에서 Rh과 Ni의 자기 모멘트 진동현상을 FLAPW(full-potential linearized augmented plane wave) 방법을 이용하여 연구하였다. 가운데 층에 있는 Ni의 자기 모멘트를 계산한 결과는 0.34${\mu}_B$으로 덩치 Ni의 값보다 약 40% 감소한 값이다. Ni과의 강한 띠 혼성으로 Rh의 각 원자 층에 자기모멘트의 변화가 나타났는데 이 변화는 중심에서 표면으로 갈수록 작아지는 감쇠 진동을 하였다. Rh의 영향을 받아 가운데 Ni층의 폐르미 준위가 Ni의 에너지 띠 안쪽으로 이동하여 Ni의 전자수가 줄어들고 있음을 계산된 상태밀도 모양에서 알 수 있었다.

• 한국자기학회지
• /
• 제22권5호
• /
• pp.157-161
• /
• 2012

각기 암염구조를 가지는 sp 반쪽금속인 NaN과 CaN가 계면상태를 이룰 때의 반쪽금속성 및 자성을 연구하기 위해 단순계면계와 혼합계면계 두 계를 고려하여, FLAPW(full-potential linearized augmented plane wave) 방법을 이용하여 그 전자구조를 계산하였다. 계산된 원자별 자기모멘트를 보면, 단순계면계에서는 Na 쪽 계면 N 원자의 자기모멘트는 안쪽 N 원자에 비해 다소 감소하였고, Ca 쪽 계면 N원자의 경우는 다소 증가하였다. 혼합계면계에서는 계면 N 원자들의 자기모멘트는 대략 덩치 CaN과 NaN에서 N 원자의 자기모멘트 값의 평균치를 가졌으나, 아래 위층 모두에서 Na와 연결된 계면 N 원자의 자기모멘트가 가장 컸고, 아래 위층 모두에서 Ca 원자와 연결된 계면 N 원자의 자기모멘트가 가장 작았다. 이와 같은 상황은 각각의 N 원자가 이웃한 Ca나 Na 원자와 결합하면서 결합에 참여하지 않은 p 전자수가 자기모멘트의 크기를 결정한다는 사실과 부합한다. 또한 계산된 원자별 상태밀도를 통해 이들의 계면상태를 논의하였다.

• 한국자기학회지
• /
• 제25권2호
• /
• pp.31-38
• /
• 2015

최근에 전자구조 계산으로 반쪽금속성을 가진다는 것이 확인된 4원 호이슬러 화합물인 CoFeCrGa와 CoFeCrGe의 (001)표면에서 반쪽금속성의 유지여부와 표면자성을 Full-potential Linearized Augmented Plane Wave 에너지띠 계산방법을 통해 연구하였다. 이를 위해 두 화합물 모두에서 각기 CoFe와 CrGa, 그리고 CrGe로 끝나는 (001)표면을 모두 고려하였다. 계산된 상태밀도로부터 두 화합물의 두가지 절단표면계 모두에서 반쪽금속성이 유지되지 못함을 알았다. 다만 CoFeCrGa에서 CrGa(001) 표면계는 그 상태밀도로부터 거의 반쪽금속성을 가짐을 알았다. 두 계에서 표면이나 표면 밑층의 Co나 Fe, 그리고 Cr 원자의 자기모멘트는 계에 따라 상당히 다른 값을 가졌다.