• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.369-376
• /
• 2016

In this paper, we propose and design a SSD(Simultaneous Single band Duplex) system using 5G(Generation) candidate modulations. Especially, we consider HPA(High Power Amplifier) nonlinearity in the proposed system. And then, we evaluate and analyze performance of the proposed system. As simulation results, performance of SSD-OFDM(Orthogonal Frequency Division Multiplexing), SSD-FMC (Universal Filtered Multi-Carrier), and SSD-FBMC(Filter Bank Multi-Carrier) is severely degraded by HPA nonlinearity. However, performance of SSD-OFDM, SSD-UFMC, and SSD-FBMC is similar in the same condition. That is, OFDM, UFMC, and FBMC have a similar PAPR(Peak to Average Power Ratio) characteristic. Finally, we can confirm that the proposed SSD system can not cancel(SI) self-interference effectively by strong HPA nonlinearity. That is, Reducing PAPR is important in order to avoid effect of HPA nonlinearity in the proposed SSD system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1433-1443
• /
• 2004

The power line modem proposed in this paper transmits the remote control signal using CSK(Code Shift Keying) and DS/SS method. The CSK technique provides the increased capacity of transmission and robustness towards noise. Besides, the DS/SS technique provides protection against narrow-band Gaussian interference and multi-path interference. The modem supports full-duplex communication using FDD(Frequency Division Duplex) and the modem structure for forward link is same with that for reverse link. To switch each sub-controlled unit smoothly, 4/$\pi$-DQPSK is adopted for noncoherent demodulation. The PN code for spreading spectrum seues to divide each group which consists of sub-controlled units and Walsh code is used for the M-ary CSK technique. Each block is designed and verified with TMS320C5402 DSP. We show the superiority of the proposed method by analyzing numerically the system performance for the factors of the DS/SS and CSK method ullder additive white Gaussian noise and PBI.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.7-15
• /
• 2007

In wireless communication networks, single-radio single-channel architecture degrades throughput and end-to-end delay due to half-duplex transmission of wireless node and route intra interference. Also, In contention-based MAC (Medium Access Control) architecture, channel contention reduces throughput and packet collision enlarges end-to-end delay. In this paper, we use multi-radio multi-channel architecture which will make wireless node to operate in full duplex mode, and exclude route intra interference. Based on this architecture, we propose a new link metric, ccf which reflects the characteristics of a contention-based wireless link, and propose a routing path metric MCCR considering channel switching delay and route intra interference. MCCR is compared with MCR by simulation, the performance of a route established by MCCR outperforms the performance of a route by MCR in terms of throughput and end-to-end delay.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.352-363
• /
• 2012

In this paper, we study the role of cooperative relays to provide and improve secure communication rates through decodeand-forward (DF) strategies in a full-duplex multiple relay network with an eavesdropper. We consider the DF scheme as a basis for cooperation and propose several strategies that implement different versions of this scheme suited for cooperation with multiple relays. Our goal is to give an efficient cooperation paradigm based on the DF scheme to provide and improve secrecy in a multiple relay network. We first study the DF strategy for secrecy in a single relay network. We propose a suboptimal DF with zero forcing (DF/ZF) strategy for which we obtain the optimal power control policy. Next, we consider the multiple relay problem. We propose three different strategies based on DF/ZF and obtain their achievable secrecy rates. The first strategy is a single hop strategy whereas the other two strategies are multiple hop strategies. In the first strategy, we show that it is possible to eliminate all the relays' signals from the eavesdropper's observation (full ZF), however, the achievable secrecy rate is limited by the worst source-relay channel. Our second strategy overcomes the drawback of the first strategy, however, with the disadvantage of enabling partial ZF only. Our third strategy provides a reasonable compromise between the first two strategies. That is, in this strategy, full ZF is possible and the rate achieved does not suffer from the drawback of the first strategy. We conclude our study by a set of numerical results to illustrate the performance of each of the proposed strategies in terms of the achievable rates in different practical scenarios.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.416-418
• /
• 2006

In this paper, a new acoustic echo cancellation approach based on the DUET algorithm and scaling factor estimation is proposed to solve the scaling ambiguity in case of blind separation based acoustic echo cancellation in a noisy environment. In hands-free full-duplex communication system. acoustic noises picked up by the microphone are mixed with echo signal. For this reason, the echo cancellation system may provide poor performance. For that purpose, a degenerate unmixing estimation technique, adjusted in the time-frequency domain, is employed to separate undesired echo signals and noises. Also, since scaling and permutation ambiguities have not been solved in the blind source separation algorithm, kurtosis for the desired signal selection and a scaling factor estimation algorithm are utilized in this rarer for the separation of an echo signal. Simulation results demonstrate that the proposed approach yields better echo cancellation and noise reduction performances, compared with conventional methods.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.131-132
• /
• 2008

It is necessary to develop a high-speed wireless transmission system, which is able to send medical informations to the emergency medical center during emergency patient transportation. In this research, a system which transmits patient’s vital signs and a real-time audio/video contents of the event has been designed, developed, and the suitability of the system has been verified. Test results indicate that the system is capable of transmitting vital signal data, including 17 numeric data, 12 waveforms and 113 events, reading the affected part by forwarding a $320{\times}240$ pixel image at 2fps. Also, the full-duplex voice transmission of the system at 8bit/64kbps is enough to make stable communication between emergency medical technicians and hospital professionals possible. After numerous hours of driving, the packet loss of patient vital signs is 0.013%.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.75-81
• /
• 2010

This paper presents the development of LED street light lamp which is controled by central command system. This system includes a lamp unit controller, data repeater and command repeater as well as the LED lamps. These devices enable the individual power control and partial on/off control of the LED lamps by the control repeater through full duplex communication line. Also, they have the ability to control the brightness and period of on/off timing by detecting the car's existence. As a result of this development, it is founded that the performances of the system have been satisfied to apply for the actual road test.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.104-114
• /
• 2007

In this paper, an Ad-hoc Routing Protocol that works in wireless Ad-hoc communication networks with multiple radios and multiple channels and that controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, the MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which allows full duplex transmission between wireless Ad-hoc nodes, and reduces intra interference on the route. Also, a fixed channel only for reception at each node enables the estimation of the available bandwidth, which is used to control the call admission for QoS provision. The performance of the MCQosR was verified by simulation.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1201-1210
• /
• 2000

In order to tolerate faults which may occur during the execution of distributed tasks in high-performance parallel computer systems, tasks are duplicated on different processors. In this paper, by utilizing the task duplication based scheduling algorithm, a new task scheduling algorithm which duplicates each task on more than two different processors with the minimum schedule length is presented, and the number of processors required for the duplication is analyzed with the ratio of communication cost to computation time and the workload of the system. A simulation with various task graphs reveals that the number of processors required for the full-duplex fault-tolerant task scheduling with the obtainable minimum schedule length increases about 30% to 75% when compared with that of the task duplication based scheduling algorithm.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2093-2095
• /
• 2002

Nowadays, there are actually lots of changes in wireless communications of Korea. But it is not an exact PTP(Peer to Peer) Communication. In other words, a mobile station which can find fixed station can be connected with wireless internet server or other services, oppositely fixed station cannot approach to mobile station. Even though it exists, it is difficult to communicate with full duplex. We can service using CDMA 1X techniques such as cellular based SMS (Short Message Service) service or very simple MPRG Services. In this paper, we propose a system, using DirectX based mobile/fixed station stand alone program, depending on bandwidth of wireless service provider, tranceiving high resolution moving picture or reliable data regularly by a fixed connection each other.