• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.274-281
• /
• 2005

A new resonant pulse converter for energy harvesting is proposed. The converter transfers energy from a low-voltage AC current to a battery. The low-voltage AC current source is an equivalent of the piezoelectric generator, which converts the mechanical energy to the electric energy. The converter consists of a full-bridge rectifier having four N-type MOSFETs and a boost converter haying N-type MOSFET and P-type MOSFET instead of diode. Switching of MOSFETs utilizes the capability of the $3^{rd}$ regional operation. The operational principles and switching method for the power control of the converter are investigated with the consideration of effects of the parasitic capacitances of MOSFETs. Simulation and experiment are performed to prove the analysis of the converter operation and to show the possibility of the $\mu$W energy harvesting.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.255-257
• /
• 1995

Many new electronic products are required to have a unity power factor and a distortion free input current waveform. In this parer, a high performance single phase AC/DC converter with input power factor correction is proposed. And each parameters are determined. Proposed control strategy has many advantages which include two Quadrants operation, simplified control circuit, high performance features and continuous Input current. The experimental results are included to verify the validity of this approach.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.490-500
• /
• 2017

Fuel cell (FC) is a promising power supply in electric vehicles (EV); however, it has poor dynamic performance and short service life. To address these shortcomings, a super capacitor (SC) is adopted as an auxiliary power supply. In this study, the frequency decoupling control method is used in electric vehicle energy system. High-frequency and low-frequency demand power is provided by SC and FC, respectively, which makes full use of two power supplies. Simultaneously, the energy system still has rapidity and reliability. The distributed power system (DPS) of EV requires DC-DC converters to achieve the desired voltage. The stability of cascaded converters must be assessed. Impedance-based methods are effective in the stability analysis of DPS. In this study, closed-loop impedances of interleaved half-bridge DC-DC converter and phase-shifted full-bridge DC-DC converter based on the frequency decoupling control method are derived. The closed-loop impedance of an inverter for permanent magnet synchronous motor based on space vector modulation control method is also derived. An improved Middlebrook criterion is used to assess and adjust the stability of the energy system. A theoretical analysis and simulation test are provided to demonstrate the feasibility of the energy management system and the control method.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2023-2027
• /
• 1997

This paper presents the dynamic analysis and control-loop design of a zero-voltage-switched full bridge (ZVS-FB) PWM dc/dc converter. Based on the small-signal analysis results, the control-loop is designed using a simple two-pole one-zero compensation circuit. Design results are verified by both computer simulations and experimental data obtained from a 2kW prototype converter.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.289-292
• /
• 2007

The modular line-connected photovoltaic PCS (power conditioning system) is proposed. The proposed system consists of a step-up DC-DC converter and a full-bridge inverter. A step-up DC-DC converter using a dual series-resonant rectifier circuit and a active-clamp circuit is proposed to achieve a high efficiency and a high input-output voltage ratio efficiently. An IncCond (incremental conductance) MPPT (maximum power point tracking) algorithm that improves MPPT characteristic is used. By control a inverter using a linearized output current controller, a unity power factor is achieved. All algorithms and controllers are implemented on a single-chip microcontroller and the superiority of the proposed algorithms and controllers is proved by experiments.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.198-199
• /
• 2019

이 논문에서 제안하고자 하는 컨버터는 태양광 모듈이 결합된 Phase-shifted Full-bridge(PSFB) 컨버터이다. 기존 전기자동차의 전력변환 시스템에는 고전압 배터리와 저전압 배터리간 전력전달을 위한 DC-DC 컨버터가 존재한다. 저전압 배터리 충전에 있어 고전압 배터리 외에 태양광 모듈 컨버터를 사용하여 고전압 배터리 사용량을 낮출 수 있다. 이 논문에서는 기존의 PSFB 컨버터의 2차측에 태양광 모듈과 스위치하나를 추가하여 태양광 Buck Converter를 구성하였고 PSFB컨버터의 출력 인덕터와 Synchronous switch를 사용하게 되어 소자 수를 절감하였다. 또한 PSFB 동작 시 1차측 전류가 Free wheeling하는 구간에서 태양광 Buck converter를 동작함으로써 고전압 배터리와 태양광 모듈에서 동시에 저전압 배터리로 전력공급이 가능하게 하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.373-374
• /
• 2012

본 논문에서는 전력변환장치의 고효율화 시대에 맞추어 AC-DC단에는 브릿지리스 PFC, DC-DC단에는 Full-Bridge LLC 공진형 컨버터를 적용하여 전부하 ZVS 동작영역 확보를 통한 고효율의 저전압, 대전류 AC-DC 정류기를 제안하였다. 제안된 AC-DC 정류기는 그린 PC용 전력변환 장치로써 단말형 중앙 집중식 PC rack 시스템에 사용된다. 따라서 19 [V], 105 [A] (2KW) Full-bridge LLC 공진형 컨버터를 설계 및 제작하여 실험을 통해 제안된 토폴로지의 타당성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.6
• /
• pp.16-21
• /
• 2005

In paper, propose new partial resonance ZCS PWM controlled High frequency insulating Full-bridge DC/DC converter not using exciting current of high frequency transformer. It is compared with the existing principles in characteristics. It also realizes a widely stabilized ZVS operating using new ON-OFF control method at synchronized power rectification MOSFET of high frequency insulating transformer secondary. Besides, it is brought over 97[%] measurement efficiency by proposed DC-DC converts. It is proved effectiveness of new methods using DC UPS PWM rectifier as switching power supply.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.395-398
• /
• 2005

A novel full-bridge converter with a new energy-recovery driver implemented a regenerative transformer is proposed to improve the efficiency for wide input voltage range and load variation. The main switches achieve ZVS independent of the load current condition. During the free wheeling period, conduction loss is minimized by recovering the circulating energy to the source. The principle of operation, design consideration and experimental result, including efficiency, are presented in the case of large variation of the input voltage or load. A proposed 1kW converter prototype is compared with a PS-FB converter.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.389-390
• /
• 2015

This paper proposes renewable energy system related with flow battery system which is divided into two system, converter and inverter. The Interleaved Boost Converter circuit was used for DC - DC Converter and Full-Bridge Inverter was used for Grid connected Inverter. This paper design each system and uses methods to operate converter and inverter in high efficiency.