• 구강회복응용과학지
• /
• 제16권1호
• /
• pp.37-49
• /
• 2000

It was clinically important to substitute the physiologic centric relation to the therapeutic position of the patients who needed the oral rehabilitation or occlusal treatment. There were several methods for recording the centric relation. One of the known methods was to use the gothic arch tracer. However the existing intraoral device was difficult to adjust the three dimensional angulation of the recording plate and recording stylus depending on the hinge movement arch of the individual. The purpose of this study was to develop new intraoral tracer which had adjustable stylus within hinge movement arch for the record of centric relation and to evaluate the clinical application of this device. The results were as follow; 1. A stylus of new developed intraoral tracer was so adjustable that the recording of mandibular positions could be reproducible within the hinge movement arc. 2. A record plate of new developed intraoral tracer was so adjustable to parallel with the occlusal plane that lateral recording of mandibular position was able to obtain stably. This study showed that new developed intraoral tracer allowed the determination of the treatment position which can be used in the full mouth rehabilitation and occlusal treatments.

• 대한치과교정학회지
• /
• 제47권1호
• /
• pp.59-73
• /
• 2017

This case report illustrates the successful treatment of a patient with skeletal Class II malocclusion and an unesthetic smile involving excessive gingival display and large buccal corridors. By applying dual buccal interradicular miniscrews, total intrusion of the maxillary dentition along with distalization was induced to improve both the occlusion and smile esthetics. In addition to the conventional cephalometric superimposition, three-dimensional superimposition was performed and evaluated to validate the treatment outcome.

• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.6-9
• /
• 2009

An 18 year old female with oligodontia and maxillary hypoplasia was treated using an interdisciplinary team approach involving orthodontists, maxillofacial surgeons and prosthodontists. Full mouth one-piece fixed partial dentures were the final restoration. The fixed partial dentures fabricated for the maxilla and mandible using the concept of a shortened dental arch resulted in improved esthetics and the masticatory function. This paper describes the treatment procedures for an oligodontia patient with alveolar bone hypoplasia.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.256-273
• /
• 2019

Nowadays interceptors have been widely used in a vast range of high-speed crafts. In this study, the results of interceptor adeptness experiments made in Istanbul Technical University's Towing Tank are unveiled. The model was tested through three transverse locations of interceptors with six different deployment depths. For three locations, the interceptor was positioned transverse on the aft; close to chine, in the middle and close to the keel. The fourth interceptor was a full length of 13.00% LWL. The results show a significant drag reduction in benefits of 1.50%-11.30% for Fn 0.58-1.19 and the trim reduction was observed in between 1.60 and $4.70^{\circ}$. Besides, one of the most significant conclusions indicates that the effect of the interceptor decreases from keel to chine for the same blade deployment heights so the blades should be controlled separately at least in three parts from keel to chine area, if operable.

• Journal of Ship and Ocean Technology
• /
• 제1권1호
• /
• pp.15-25
• /
• 1997

A series of towing tank tests were carried out for 18 full ship models of high block coefficients. The resistance coefficients and wake distribution at the propeller plane were measured and carefully examined. Regression analysis was employed to find out the relationships with the hull form parameters. Equations for wave resistance coefficient, form factor, and nominal wake are given. A harmonic analysis of measured wake was performed to look into the influence of the local stern shape on the magnitude of fluctuating wake components at three different radii. The amplitude of wake harmonics was also expressed by regression quations. It was found that the regression formulas were very useful in estimating resistance and circumferential wake characteristics of full ship models. It was also considered that the formulas presented in this paper could be utilized in the hull form improvement in a preliminary design.

• Journal of Periodontal and Implant Science
• /
• 제45권6호
• /
• pp.210-215
• /
• 2015

Purpose: The aim of this retrospective study was to investigate the cumulative success rate, the implant survival rate, and the occurrence of biological complications in implants supporting full-arch immediately loaded rehabilitations supported by upright and tilted implants. Methods: The clinical records and periapical radiographs of patients who attended follow-up visits were collected, and information was recorded regarding marginal bone loss resorption, the occurrence of peri-implant infectious diseases, and the implant survival rate. Implants were classified as successful or not successful according to two distinct classifications for implant success. Results: A total of 53 maxillary and mandibular restorations including 212 implants were analysed, of which 56 implants were studied over the full five-year follow-up period. After five years, the cumulative success rate was 76.04% according to the Misch classification and 56.34% according to the Albrektsson classification. The cumulative implant survival rate was 100%, although one implant was found to be affected by peri-implantitis at the second follow-up visit. Conclusions: The cumulative success rate of the implants dropped over time, corresponding to the progression of marginal bone resorption. The prevalence of peri-implantitis was very low, and the implant survival rate was not found to be related to the cumulative success rate.

• Steel and Composite Structures
• /
• 제22권4호
• /
• pp.855-874
• /
• 2016

In this paper, it is aimed to evaluate the earthquake angle influence on the seismic performance of steel highway bridges. Upper-deck steel highway bridge, which has arch type load bearing system with a total length of 216 m, has been selected as an application and analyzed using finite element methods. The bridge is subjected to 1992 Erzincan earthquake ground motion components in nineteen directions whose values range between 0 to 90 degrees, with an increment of 5 degrees. The seismic weight is calculated using full dead load plus 30% of live load. The variation of maximum displacements in each directions and internal forces such as axial forces, shear forces and bending moments for bridge arch and deck are attained to determine the earthquake angle influence on the seismic performance. The results show that angle of seismic input motion considerably influences the response of the bridge. It is seen that maximum arch displacements are obtained at X, Y and Z direction for $0^{\circ}$, $65^{\circ}$ and $5^{\circ}$, respectively. The results are changed considerably with the different earthquake angle. The maximum differences are calculated as 57.06%, 114.4% and 55.71% for X, Y and Z directions, respectively. The maximum axial forces, shear forces and bending moments are obtained for bridge arch at $90^{\circ}$, $5^{\circ}$ and $0^{\circ}$, respectively. The maximum differences are calculated as 49.12%, 37.37% and 51.50%, respectively. The maximum shear forces and bending moments are obtained for bridge deck at $0^{\circ}$. The maximum differences are calculated as 49.67%, and 49.15%, respectively. It is seen from the study that the variation of earthquake angle effect the structural performance of highway bridges considerably. But, there is not any specific earthquake angle of incidence for each structures or members which increases the value of internal forces of all structural members together. Each member gets its maximum value of in a specific angle of incidence.

• 대한치과보철학회지
• /
• 제19권1호
• /
• pp.7-16
• /
• 1981

The technology of precision attachments has developed at such a pace that from a very few T-shaped attachments and bar attachments from the years 1915 to 1935 since removable bridge utilizing a T-shaped intracoronal attachment was constructed by Dr. Herman E.S. Chayes in 1906. There are now more than 120 models of the most diversified designs, ready made or laboratory fashioned. In 1971, 126 attachments were listed and classified by Mensor in his E M Attachment Selector. This selector consists of five charts giving specifications as to type, vertical dimensions, application, type of resilience, size of movement, type of retention and type of material and alloy. Thus the E M Attachment Selector is a useful guide for dentists to choose the attachment for his patients. But dentists should apply the attachment in each patient's case according to an accurate diagnosis and treatment plan. This paper is a case report of removable partial dentures utilizing CSP, PD and Bar attachment on a patient who needed full mouth reconstruction. Patient has right first, second molar and left first molar on the upper arch and also left first molar, first premolar and right canine on the lower arch. (Fig. 5)All remaining teeth are relatively healthy in their supporting tissues. On upper arch, ring shape CSP attachment was designed on left first molar and modified ring shape CSP attachment was designed on right first and second molar as the direct retainer of the removable partial denture. Full palatal coverage was used as the major connector in this case. (Fig. 23) On lower arch, author first splinted with a fixed bridge between left first molar and second premolar and a splint bar between left second premolar and right canine. (Fig. 11) A lower removable partial denture in which was designed with an Aker clasp on the left first molar and a PD attachment on .the right canine was constructed. (Fig. 17) This denture could get additional support from anterior splint bar. After both removable partial dentures were delivered to the patient (Fig. 26), author evaluated function of the dentures and supporting structures of the abutment teeth by means of clinical and X-ray examinations for eighteen months. According to the examination data author came to the conclusion that the prognosis of this case was excellent.

• 대한치과보철학회지
• /
• 제62권3호
• /
• pp.201-214
• /
• 2024

불안정한 하악운동을 하는 환자가 불수의적인 안면근육의 움직임과 안모의 비대칭적 변화를 동반하는 경우 교합수직고경의 결정과 중심위 기록, 그리고 교합평면의 정보 전달에 많은 어려움을 겪게 된다. 본 증례에서는 편측성 안면 신경마비의 증상을 갖고 오랜 기간 무치악 상태였던 환자를 위해, 3D 프린팅 방식으로 제작된 개인맞춤형의 고딕아치 묘기장치와 조립식의 교합평면 인기장치인 POP bow system을 이용하여 CAD-CAM 임시보철물을 제작하고 안정적인 악간관계를 도모하였다. 이후, 적절한 교합수직고경과 재현성 있는 중심위 및 올바른 3차원적 교합평면의 전달을 통해 전악 임플란트 고정성 보철물을 제작하고, 지속적인 유지관리를 시행하여 환자에게 기능적이고 심미적인 구강건강을 회복해 주었기에 이를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제53권1호
• /
• pp.51-57
• /
• 2015

치주질환에 의해 수평적, 수직적 골흡수를 보이는 환자에게 전악 임플란트 고정성 보철수복 치료를 계획한 경우에는 저작 기능, 심미, 발음 등을 고려한 임플란트 식립이 필요하다. 이를 위해 철저한 임상적, 방사선학적 진단이 필요하며 광범위한 골이식과 연조직 이식술이 요구되기도 한다. 아직까지도 골이식한 상악에 대한 적절한 임플란트 식립 개수, 하부구조물 분할 여부 및 상부 구조물의 유지 방법 등에 대한 명확한 지침이 마련되어 있지 않기 때문에 진단과정에서 이를 고려한 검사가 요구된다. 본 증례에서는 치주질환 병력이 있는 환자에서 상, 하악 다수 치아 발거 및 치주 치료 후, 골이식 및 연조직 이식을 동반한 다수 임플란트 식립과 하악 자연 치열에 대합되는 상악 임플란트 전악 보철수복을 통하여 기능적, 심미적으로 만족할 만한 결과를 얻었기에 이를 보고하고자 한다.