• 한국연소학회지
• /
• 제17권4호
• /
• pp.11-20
• /
• 2012

The Blow-off characteristics of LPG/air lean pre-mixed flames were experimentally investigated using a double and a multiple concentric coflow burners. Experiments were conducted to understand the effects of recirculation motion, thermal interaction between flames, and stratified flame configuration. Here, the stratified premixed flame is a "new concept" of a flame that sequentially contains fuel rich, stoichiometric, and fuel lean reaction zones in a flame. The blow-off from a lean premixed flame was significantly suppressed with recirculation motion. The recirculation motion by itself, however, was not sufficient to prevent the blow-off when the equivalence ratio became low. The existence of a inner premixed flame could also help to prevent the blow-off of lean premixed flame; however, the blow-off suppression effect was rather diminished by weakened recirculation motion with the presence of inner flame. The inner flame could be separated from an outer flame on a multiple concentric coflow burner, causing recirculation motion as well as thermal interaction between flames to become effective; therefore, the blow-off was further suppressed. The lean premixed flame could be stabilized with a fuel rich premixed flames that was produced with the supply of fuel through an inner nozzle. The penetration of lean premixed gas from outside into the fuel stream produced a lifted rich premixed flame. Chemiluminescence images of OH, CH, and $C_2$ radicals confirmed the structure of a stratified premixed flame. The stable premixed flames could be obtained at the very fuel lean condition by applying the stratified premixed flame concept.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.32-38
• /
• 2003

Staged combustion, such as air- and fuel-staging, is a relatively well-known technique fur reduction of NOx emission and used in combination with other techniques nowadays. However, the design variables are still selected depending upon operating conditions. There are many variables tested to investigate the NOx emission characteristics fur changing of fuel or air velocity, swirl intensity, and staging ratio of air and fuel in multi-staged burner. In air-staging case, the fuel-rich condition of the primary combustion zone is very helpful to reduce NOx emission and its range is known to be restricted by the increase of carbon monoxide. However, in many cases carbon monoxide level is not too high to be restricted operating condition. So we tried to expand the equivalence ratio range to the richer condition in the primary combustion zone and certificate the function of each burner component and its contribution to the overall NOx production.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.658-662
• /
• 1990

In the air-fuel control of automotive engine to improve its efficiency, fuel economy and less emissions, conventional control methods using $O_{2}$ sensor or the lean air-fuel ratio sensor provide only open control in rich conditions. Control with a wide range air-fuel sensor makes it possible to employ closed loop control for all engine conditions including rich combustion. With a wide range A/F sensor and A/F transfer functions, a PID control system is constructed which employs an learning scheme. A/F controller is designed which enables to improve the ability of its compensation for sensors and actuators, and its control operation is evaluated by computer simulation.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.1-11
• /
• 2004

Combustion and fuel distribution characteristics of heavy duty engine with the liquid phase LPG injection(LPLI) were studied in a single cylinder engine, Swirl ratio were varied between 1.2, 2.3, and 3.4 following Ricardo swirl number(Rs) definition, Rs=2.3 showed the best results with lower cycle-by-cycle variation and shorter burning duration in the lean region while strong swirl(Rs=3.4) made these worse for combustion enhancement. Excessive swirl resulted in reverse effects due to high heat transfer and initial flame kernel quenching. Fuel injection timings were categorized with open valve injection(OVI) and closed valve injection(CVI). Open valve injection showed shorter combustion duration and extended lean limit. The formation of rich mixture in the spark plug vicinity was achieved by open valve injection. With higher swirl strength(Rs=3.4) and open valve injection, the cloud of fuel followed the flow direction and the radial air/fuel mixing was limited by strong swirl flow. It was expected that axial stratification was maintained with open-valve injection if the radial component of the swirling motion was stronger than the axial components. The axial fuel stratification and concentration were sensitive to fuel injection timing in case of Rs=3.4 while those were relatively independent of the injection timing in case of Rs=2.3.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.869-872
• /
• 2011

다단연소 사이클 로켓엔진용 산화제과잉 예연소기 연소성능 평가를 위해 점화시험을 수행하였다. 산화제과잉 예연소기는 혼합비 60, 20 MPa의 연소압에서 작동하도록 설계되었다. 케로신과 액체산소의 일부는 혼합헤드를 통해 연소실로 공급되어 산화제과잉 환경에서 연소되며 나머지 액체산소는 연소실 중앙에 위치한 분사구를 통해 연소실에 주입되어 기화된다. 접촉발화성 연료로 별도의 점화용 분사기 없이 전체 분사기를 통해 점화용 추진제를 공급하여 점화하는 방식을 사용하였다. 안정적 점화를 위해 각각의 추진제를 2단으로 공급하여 점화할 수 있도록 하였다. 시험결과 설계유량의 45% 이하의 저유량 점화구간에서 저주파 진동이 발생하였다. 저주파 진동을 피하기 위해 저유량 구간을 최소화하는 방식으로 설계 연소압까지 안정적 점화를 유도할 수 있었다.

• 화약ㆍ발파
• /
• 제18권1호
• /
• pp.53-58
• /
• 2000

Thermal analysis, analysis of combustion residue and combustion characteristics measure ment such as burning rate or temperature were carried out to clarify the combustion mechanism of a tungsten- potassium perchlorate-barium chromate chromate delay powder. The results obtained are as follows. The main reaction of the delay powder of tungsten-potassium perchlorate-barium chromate is the oxidation of tungsten by potassium perchlorate. Barium chromate acts as a burning rate modifier, and the smaller the larger is the burning rate. Three types of delay composition used in this study show characteristic burning behavior. A stoichiomertric or a oxidizer-rich composition has a small linear burning rate. although it is has a large heat of combustion. On the other hand, a tungsten-excess or a fuel-rich composition with a small heat of combustion has a larger linear burning rate than the former, showing a small fractional oxidation of tungeten (below 10%) contained in the delay powder. From these results, a surface combustion mechanism is proposed for the combustion mechanism of this delay powder.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.181-185
• /
• 2006

국내 최초로 개발된 액체로켓엔진용 연료 과농 가스발생기는 900 K 정도의 온도를 갖는 58 bar 수준의 고압가스를 초당 4 kg이상 발생시킬 수 있다. 고압가스는 터보펌프 터빈을 안정적으로 구동할 수 있으며, 추진제 공급탱크 가압에 필요한 열원으로 사용될 수 있다. 본 가스발생기는 개념설계 및 일련의 초기 개발시험을 거쳐 최종 형상이 결정되었으며, 구조 및 열 해석이 동시에 진행되었다. 제작은 정밀 기계가공과 표면처리, 특수용접 공정을 통해 이루어졌으며, 최종 개발 성능 및 기능 특성 확인을 위해 총 다섯 차례의 연소시험이 진행되었다. 시험결과를 통해 안정적인 점화 및 연소특성과 발생 연소가스의 온도분포 및 평균온도 특성이 개발 요구규격을 본 개발품이 만족하는 것으로 판단하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.123-126
• /
• 2011

케로신을 연료로 사용하는 연료 과잉 예연소기는 비평형 연소반응을 하며, 화학평형 해석으로는 정확한 연소가스 물성치 예측이 쉽지 않다. 본 연구에서는 연소 가스 물성치 예측을 위해, 예혼합 대향류 화염 해석을 수행하였다. 케로신 연료의 대표 물성치로 JP10을 선정하였으며, UC San Diego 반응 메커니즘을 사용하여 초임계 조건에서 비평형 연소해석을 수행하였다. 안정적인 화염 확보를 위해 예혼합 추진제의 대향류 화염을 가정하였으며, Huzel의 실험 결과에 비해 온도가 높게 예측 되었다. 이에 따라 비열, 비열비, 분자량 결과에서 차이를 보였으나 화학평형 결과에 비해 실험값과 더 유사한 경향을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제28권4호
• /
• pp.392-400
• /
• 2017

An experimental study was conducted to investigate behavior of steel surface oxidation with characteristics of the combustion. The excess entalphy combustion in porous media system was applied to implement the direct radiation heating system. The surface oxidation thickness (SOT) of fuel-lean was thicker than the SOT of fuel-rich. Also, the SOT was increased by increasing residence time. Detailed explanations were given by SEM and EDS analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.555-558
• /
• 2008

The demand for a boiler with low NOx burner is increasing with the recent strict NOx regulation. Staged burner is a common low NOx burner to suppress the formation of thermal NOx by yielding local fuel rich and fuel lean condition. The staged burner gives fire with bigger frontal area and length compared with a conventional burner, which changes heat transfer characteristics in the combustion chamber. The heat transfer and exhaust gas characteristics has been studied in the present study for a 0.5 t/h class furnace type boiler adopting the staged burner. A numerical simulation has been conducted to clarify the detailed physics inside the combustion chamber.