• Tribology and Lubricants
• /
• 제16권6호
• /
• pp.440-447
• /
• 2000

It's a tendency to strengthen related international laws as the importance on marine oil pollution recently becomes the issue. According to the regulation of IMO, oil discharge from ships is allowed under 15 ppm only and oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380 cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. Oily water pre-separator of laminated plate type which is one of gravity type separator has very simple structure and it also makes easier to maintain and repair. In another words, it fits well to process large amount of rich oil with high specific gravity. In this paper, oily water pre-separator of laminated plate type has been studied. The function of emulsified oil and 4 different types of oil have been analyzed and each character has been investigated and proved by experiments. As the result of it, the efficiency of separating oil water has been advanced by 10% in case equipped with pre-separator. In addition, the higher temperature is and the more laminated plate has, it turns out to be getting more effect.

• 자원ㆍ환경경제연구
• /
• 제23권3호
• /
• pp.435-451
• /
• 2014

수도권 미세먼지 발생저감 대책의 일환으로, 노후화된 경유차에서 발생하는 주요 대기오염물질 배출을 저감하기 위한 수도권 운행경유차 공해저감 사업이 시행되었다. 본 사업의 사회적 경제성을 평가하기 위한 방법론을 제시하고, 주요 차량 배출저감장치의 유효성을 비교 분석하였다. 방법론적으로는 노후화된 차량의 차령이 유한하기 때문에, 본 사업의 평가에 적합하도록 만기유한 형태의 실물옵션 모형을 개발하였다. 분석 결과, 공해저감 사업의 사회적 경제성은 전반적으로 확보되며, 버스와 트럭별로 저감장치를 구분하여 선택적으로 이루어질 때 그 효과가 더욱 제고되는 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.24-30
• /
• 2004

As the environmental pollution becomes serious global problem, the regulation of emission exhausted from automobiles is strengthened. Therefore, it is very important to know how to reduce the NOx and PM simultaneously in diesel engines, which has lot of merits such as high thermal efficiency, low fuel consumption and durability. By this reason, the new concept called as Homogeneous Charge Compression Ignition(HCCI) engines are spotlighted because this concept reduced NOx and P.M. simultaneously. However, there is trade off between output and NOx in a HCCI engine. In this study, output and emission characteristics for a gasoline direct injection type HCCI engine were investigated to clarify the effects of intake air temperature, injection time and mixture formation. From these experiments, we found that the smoke was not produced when the fuel was injected earlier than BTDC 90$^{\circ}$. In addition, the output was increased because of delay of ignition time and NOx emission was decreased because of homogeneous charge of first injection in case of split injection.

• 해양환경안전학회지
• /
• 제28권4호
• /
• pp.657-666
• /
• 2022

국제해사기구(IMO)는 국제해운 분야의 온실가스(Green House Gas, GHG) 감축을 위하여 각국의 기술 개발 및 에너지 효율성 제고에 관한 정책 시행을 적극적으로 권장하고 있다. 이러한 IMO의 환경규제와 관련된 정책들은 해운 분야 전반에 큰 영향을 미치고 있으며, 선주들에게도 막대한 부담으로 작용하고 있다. 선박에서 발생하는 GHG 배출을 억제하기 위한 가장 합리적인 방안은 탄소제로배출(Zero Emission) 선박의 개발로 귀결된다. 즉 친환경 연료로 추진하는 연료전지선박(Fuel Cell Ship, FCS)의 개발이 IMO의 규제를 벗어날 수 있는 대안인 것이다. 아시아, 북미, 유럽 등의 각국에서는 독자적으로 PEMFC를 개발 및 생산하여 국제공인등록 기관으로부터 형식승인인증을 획득함으로써 국제표준화의 선점을 추구하고 있다. 현재 다양한 연료전지(Fuel Cell, FC) 중에서 선박용으로 권장하는 것은 크게 고분자전해질 연료전지(PEMFC), 용융 탄산염 연료전지(MCFC) 및 고체산화물형 연료전지(SOFC) 등의 세종류가 있다. 본 연구에서는 글로벌 FC 시장에서 지속적인 성장이 예상되는 PEMFC를 대상으로 하여 국내외 개발 동향, 제조업체별 규격, 성능 및 선박에 적용한 실증적 사례를 분석하였다. 그리고 PEMFC를 선박에 적용할 경우, 고려해야 할 사항과 개발 방향에 관하여 제안하고자 하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.13-19
• /
• 2003

As the environmental pollution becomes serious global problem, the regulation of emission exhausted from automobiles is strengthen. Therefore, it is very important to know how to reduce the NOx and PM simultaneously in diesel engines, which has lot of merits such as high thermal efficiency, low fuel consumption and durability. By this reason, the new concept called as Homogeneous Charge Compression Ignition(HCCI) engines are spotlighted because this concept reduced NOx and P.M. simultaneously. However, it is well known that HCCI engines increased HC and CO. Thus, the investigation of combustion characteristics which consists cool and hot flames for HCCI engines were needed to obtain the optimal combustion condition. In this study, combustion characteristics for direct inject type HCCI engine such as quantity of cool flame and hot flame, ignition timing and ignition delay were investigated to clarify the effects of these parameters on performance. The results revealed that diesel combustion showed the two-stage ignition of cool flame and hot flame, the rate of cool flame increase and hot flame decrease with increasing intake air temperature. On the other hand, the gasoline combustion is the single-stage ignition and ignition timing is near the TDC. In addition mixed fuel combustion showed different phenomenon, which depends on the ratio of gasoline component. Ignition timing of mixed fuel is retarded near the TDC and the ignition delay is increased according to ratio of gasoline.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.164-169
• /
• 2015

Recent research has focused on alternative fuel to improve engine performance and to comply with emission regulation. Finding an alternative fuel and reducing environment pollution are the main goals for future internal combustion engines. The purpose of this study is to obtain low-emission and high-efficiency by hydrogen enriched CNG fuel in SI engine and is to clarify the effects of hydrogen enrichment in CNG fuelled engine on exhaust emission and performance. An experimental study was carried out to obtain fundamental data for performance and emission characteristics of hydrogen enrichment in SI engine. The experiment was conducted at 2500 rpm, bmep 2 bar, 4 bar conditions while CNG fuel was mixed with 10, 20 and 30% hydrogen blends. From the experimental results, combustion duration was shortened due to rapid flame propagation velocity of hydrogen and these were attributed to the burning velocity increasing exponentially with increasing hydrogen blending ratio. Hydrogen has much wider flammable limit than methane, gasoline and the minimum ignition energy is about an order of magnitude lower than for other combustion. By adding hydrogen, $CO_2$ and HC were reduced. However, $NO_X$ was increased dut to high rate of heat release for hydrogen substitutions.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.17-24
• /
• 2004

As the environmental pollution becomes serious global problem, the regulation of emission exhausted from automobiles is strengthened. Therefore, it is very important to know how to reduce the NOx and PM simultaneously in diesel engines, which has lot of merits such as high thermal efficiency, low fuel consumption and durability. By this reason, the new concept called as Homogeneous Charge Compression Ignition(HCCI) engines are spotlighted because this concept reduced NOx and P.M. simultaneously. However, it is well known that HCCI engines increased HC and CO. Thus, the investigation of combustion characteristics which consists cool and hot flames for HCCI engines were needed to obtain the optimal combustion condition. In this study, combustion characteristics for direct injection type HCCI engine such as quantity of cool flame and hot flame, ignition timing and ignition delay were investigated to clarify the effects of these parameters on performance. The results revealed that diesel combustion showed the two-stage ignition of cool flame and hot flame, the rate of cool flame increase and hot flame decrease with increasing intake air temperature. On the other hand, the gasoline combustion is the single-stage ignition and ignition timing is near the TDC. In addition mixed fuel combustion showed different phenomenon, which depends on the ratio of gasoline component. Ignition timing of mixed fuel is retarded near the TDC and the ignition delay is increased according to ratio of gasoline.

• 기술혁신연구
• /
• 제30권1호
• /
• pp.21-56
• /
• 2022

정교히 디자인된 정부의 환경규제는 기업의 혁신을 촉진할 수 있다는 마이클 포터의 주장 이후로 환경규제와 기업혁신간의 관계에 대해 많은 선행 연구가 진행되었다. 선행 연구의 결과를 보면, 정부 규제의 효과성에 대해 여전히 상충되는 결과를 보이기도 한다. 이에, 본 연구에서는 기업 행태 이론과 기업 이질성 관점에 기반하여, 환경규제의 강도와 정부의 규제 발표 후 실제 시행될 때까지 남은 기간의 정도가 개별 기업의 혁신 활동에 어떤 영향을 주는지 실증 분석하였다. 미국의 자동차 연비규제 사례를 바탕으로 분석한 결과, 발표된 환경규제 기준을 달성하지 못한 후발 기업의 경우 규제의 강도가 증가함에 따라 선도기업 대비 기존과는 다른 기술 지식을 탐색하지만 출원하는 특허의 임팩트는 감소하는 경향성을 보였다. 또한, 규제 시행일이 다가옴에 따라, 후발 기업은 선도 기업 대비 더 많은 특허를 출원했지만, 출원한 특허의 임팩트는 감소하는 것으로 나타났다. 본 연구의 실증 결과는 정부의 환경규제에 대응하는 기업의 혁신 전략이 성과에 대한 기대 수준, 기대 수준과 실제 성과간 격차, 그리고 기업의 기술 역량에 따라 어떻게 달라질 수 있는지 검증하였다는 점에 그 이론적, 실무적 공헌점이 있다.

• 조명전기설비학회논문지
• /
• 제20권4호
• /
• pp.21-28
• /
• 2006

본 논문에서는 Ballard사의 1.2[kW]급 연료전지와 연료전지의 저전압($28{\sim}43[VDC]$)을 승압(380([VDC])시키기 위한 풀-브리지 직류-직류 컨버터, 그리고 승압된 직류 링크전압을 교류 전압(220[VAC]), 60[Hz]으로 변환하기 위한 단상 풀-브리지 인버터로 구성된 연료전지 발전용 전력변환시스템 중 풀-브리지 고주파 절연형 영전압 영전류 스위칭 위상 천이 펄스폭 변조 직류-직류 컨버터를 제안하였다. 제안한 풀-브리지 고주파 절연형 영전압 영전류 스위칭 위상 천이 펄스폭 변조 직류-직류는 프리휠링 다이오드를 포함한 탭부 인덕터 필터를 이용하여 순환 전류를 저감시켰으며, 스위치 및 변압기의 턴-온, 턴-오프시에 오버슈트 전압이나 과도현상이 발생하지 않는다. 그리고 넓은 출력 전압 조정에도 효율을 $93{\sim}97[%]$정도 얻을 수 있으며, 출력 부하전류의 변화에 대해 거의 일정한 출력 전압 특성을 가졌다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.37-44
• /
• 2004

Automotive company has been endeavoring to develop high strength steels to get higher fuel efficiency of car since the oil shortage in 1970s and to cope with the recent strict environmental regulation. Outer panels(Hood, Roof, Door and Fender) for automobile require higher dent resistance. Bake-hardenable(BH) steels are known as useful for their high deep drawability and high dent resistance. Recently BH steels are increasingly adapted for outer panel use due to their high drawability and high dent resistance. In this study effect of temper rolling on formability (textures, r value) and bake hardenability is investigated fur improving characteristic of bake-hardenable steels.