• Nuclear Engineering and Technology
• /
• 제37권1호
• /
• pp.91-100
• /
• 2005

Kyung-hee Thorium Fuel (KTF), a heterogeneous thorium-based seed and blanket design concept for pressurized light water reactors, is being studied as an alternative to enhance proliferation resistance and fuel cycle economics of PWRs. The proliferation resistance characteristics of the KTF assembly design were evaluated through parametric studies using neutronic performance indices such as Bare Critical Mass (BCM), Spontaneous Neutron Source rate (SNS), Thermal Generation rate (TG), and Radio-Toxicity. Also, Fissile Economic Index (FEI), a new index for gauging fuel cycle economy, was suggested and applied to optimize the KTF design. A core loaded with optimized KTF assemblies with a seed-to-blanket ratio of 1: 1 was tested at the Korea Next Generation Reactor (KNGR), ARP-1400. Core design characteristics for cycle length, power distribution, and power peaking were evaluated by HELIOS and MASTER code systems for nine reload cycles. The core calculation results show that the KTF assembly design has nearly the same neutronic performance as those of a conventional $UO_2$ fuel assembly. However, the power peaking factor is relatively higher than that of conventional PWRs as the maximum Fq is 2.69 at the M$9^{th}$ equilibrium cycle while the design limit is 2.58. In order to assess the economic potential of a heterogeneous thorium fuel core, the front-end fuel cycle costs as well as the spent fuel disposal costs were compared with those of a reference PWR fueled with $UO_2$. In the case of comprising back-end fuel cycle cost, the fuel cycle cost of APR-1400 with a KTF assembly is 4.99 mills/KWe-yr, which is lower than that (5.23 mills/KWe-yr) of a conventional PWR. Proliferation resistance potential, BCM, SNS, and TG of a heterogeneous thorium-fueled core are much higher than those of the $UO_2$ core. The once-through fuel cycle application of heterogeneous thorium fuel assemblies demonstrated good competitiveness relative to $UO_2$ in terms of economics.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.306-314
• /
• 2015

This paper examines the difference in the value of the nuclear fuel cycle cost calculated by the deterministic and probabilistic methods on the basis of an equilibrium model. Calculating using the deterministic method, the direct disposal cost and Pyro-SFR (sodium-cooled fast reactor) nuclear fuel cycle cost, including the reactor cost, were found to be 66.41 mills/kWh and 77.82 mills/kWh, respectively (1 mill = one thousand of a dollar, i.e., $10^{-3}$ $). This is because the cost of SFR is considerably expensive. Calculating again using the probabilistic method, however, the direct disposal cost and Pyro-SFR nuclear fuel cycle cost, excluding the reactor cost, were found be 7.47 mills/kWh and 6.40 mills/kWh, respectively, on the basis of the most likely value. This is because the nuclear fuel cycle cost is significantly affected by the standard deviation and the mean of the unit cost that includes uncertainty. Thus, it is judged that not only the deterministic method, but also the probabilistic method, would also be necessary to evaluate the nuclear fuel cycle cost. By analyzing the sensitivity of the unit cost in each phase of the nuclear fuel cycle, it was found that the uranium unit price is the most influential factor in determining nuclear fuel cycle costs.

• Nuclear Engineering and Technology
• /
• 제7권4호
• /
• pp.295-310
• /
• 1975

고리원자로의 핵연로비 추정을 위한 가격 모델을 수립하고 이를 기초로 MITCOST-II 전자계산 code를 써서 고리 발전소의 전수명에 걸친 핵연료주기비를 계산하였다. 사용후 연료를 재처리 하지 않는다는 간단한 핵주기를 가정하였는데 평균 단위 핵연료비는 7.332 mills/Kwhe으로 추정되었으며 이중 우라늄 원광비와 농축비가 85% 이상을 차지하고 있음을 알아내었다. 또한 원광가격과 농축가격의 변동 및 발전소 가동율의 변화에 따른 영향을 계산했으며 그 결과 핵연료비가 원광가격 변동에 매우 민감하게 변화한다는 사실도 알아내었다. 따라서 경제적으로 전력을 생산하기 위해서는 적기에 염가로 우라늄을 확보할 수 있도록 노력을 기울여 야 한다고 제안하였다.

• 대한조선학회논문집
• /
• 제61권2호
• /
• pp.88-97
• /
• 2024

This study performed the analysis on an economic feasibility of each marine fuel, potential fuel pathways and the relevance of compliance measures to ensure compliance with the FuelEU Maritime regulation. Additionally, it identified certain regulatory gaps to encourage the use of alternative marine fuels. Regarding GHG emissions calculations, the existing GHG regulations for ships applies the Tank-to-Wake (TtW) method, whereas FuelEU Maritime applies the Well-to-Wake (WtW) method. The main results present that important information to establish response strategy for FuelEU Maritime including the costs and benefits of each marine fuel, the minimum blending ratio of alternative fules, and compliance impacts of measures. For the regulatory costs and benefits of marine fuels following the implementation of the FuelEU Maritime from 2025, our findings indicate that while most fossil fuels incur regulatory costs from 2025, most of biofuels and RFNBO fuels do not incur costs until 2050. This will play a role to narrow the price gap between fossil fuels and alternative fuels.

• 한국유기농업학회지
• /
• 제22권4호
• /
• pp.531-547
• /
• 2014

This study analyzed the effect of Greenhouse of wood pellet fuel conversing from Diesel. Analyzed through a life cycle assessment of greenhouse gas emissions of carbon dioxide for the environmental assessment, In evaluation of the Ministry of the Environment, analyzed through the life cycle assessment of carbon dioxide emissions of the greenhouse gas and, In the case of economic evaluation, we analyzed the investment payback period to the total revenue generated by each of the calculated incentive based on the RHI and institutions reduction projects a reduction of costs associated with the reduction of fuel costs.

• Nuclear Engineering and Technology
• /
• 제8권4호
• /
• pp.219-229
• /
• 1976

우리나라에서 건설될 가상적인 1125MWe PWR발전소에 대해 통계적인 방법으로 몇가지 서로 다른 핵주기간의 상호 경제성을 살펴 보았다. 모든 핵연료 파라메타들은 각기 적절한 확률분포함수를 갖고 있는 통계적인 변수로 취급하였고, 무작위 표본 추출 방법으로 요구비용 및 여러가지 핵주기성분에 대한 break-even 코스트들의 히스토그램을 얻었다. 이 히스토그램으로 throw-away 주기에 대한 재처리 및 플루토늄 재장전주기의 cost-benefit를 조사하였다.

• 방사성폐기물학회지
• /
• 제13권4호
• /
• pp.271-282
• /
• 2015

외부비용은 재화나 서비스가 생산 또는 소비되는 과정에서 제3자에게 부과되는 비용이다. 원자력 발전을 통한 전력생산에도 외부비용이 발생하며 이들에 대한 연구가 1990년대부터 진행되어 왔다. 비용은 정책결정에 중요한 요소로 전력 생산에 대한 비용 비교를 위해 외부비용이 고려되고 있다. 핵연료주기에서도 선택에 따라 다른 외부비용이 발생되지만 이에 대한 연구는 진행되고 있지 않다. 본 연구에서는 핵연료주기 외부비용 평가 방법 개발을 위해 원자력 발전에 대한 외부비용 평가방법을 조사하고 분석하였다. 후쿠시마 사고 이전에는 외부비용 연구들은 정상 운전 상태에서의 손상 비용에 초점을 두었다. 그러나 사고 이후 사고비용이 주요 주제가 되었다. 사고비용을 포함한 외부비용 범위는 여러 연구들에서 다양하게 사용되었으며 범위에 맞춰 다른 방법들이 적용되었다. 본 연구에서는 이러한 결과들이 비교되었으며 핵연료주기에 따른 외부비 용 추산에 방법적 적용성 판단을 위해 분석되었다.

• 에너지공학
• /
• 제8권2호
• /
• pp.317-324
• /
• 1999

This study suggests the effectiveness of an "extended" power system evaluation methodology based on LCA and energy input-output analysis techniques. This "extended" evaluation methodology is designed to incorporate total energy system costs through fuel cycle and external costs, including CO$_2$abatement cost. As an empirical test, we applied the methodology to orimulsion-fired power generation technology and found that orimulsion could be considered as in attractive base-load power generation fuel in terms of economic and environmental aspects, compared to conventional coal-fired power plant.

• 방사성폐기물학회지
• /
• 제16권3호
• /
• pp.359-367
• /
• 2018

Long-lived Small Modular Reactors are being promoted as an innovative way of catering to emerging markets and isolated regions. They can be operated continuously for decades without requiring additional fuel. A novel configuration of long-lived reactor core employs a mixed neutron spectrum, providing an improvement in nonproliferation metrics and in safety characteristics. Starting with a base sodium reactor design, moderating material is inserted in outer core assemblies to modify the fast spectrum. The assemblies are shuffled once during core lifetime to ensure that every fuel rod is exposed to the thermalized spectrum. The Mixed Spectrum Reactor is able to maintain a core lifetime over two decades while ensuring the plutonium it breeds is below the weapon-grade limit at the fuel discharge. The main drawbacks of the design are higher front-end fuel cycle costs and a 58% increase in core volume, although it is alleviated to some extent by a 48% higher power output.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.849-858
• /
• 2015

This study set the pyroprocess facility at an engineering scale as a cost object, and presented the cost consumed during the unit processes of the pyroprocess. For the cost calculation, the activity based costing (ABC) method was used instead of the engineering cost estimation method, which calculates the cost based on the conceptual design of the pyroprocess facility. The calculation results demonstrate that the pyroprocess facility's unit process cost is $194/kgHM for pretreatment, $298/kgHM for electrochemical reduction, $226/kgHM for electrorefining, and $299/kgHM for electrowinning. An analysis demonstrated that the share of each unit process cost among the total pyroprocess cost is as follows: 19% for pretreatment, 29% for electrochemical reduction, 22% for electrorefining, and 30% for electrowinning. The total unit cost of the pyroprocess was calculated at $1,017/kgHM. In the end, electrochemical reduction and the electrowinning process took up most of the cost, and the individual costs for these two processes was found to be similar. This is because significant raw material cost is required for the electrochemical reduction process, which uses platinum as an anode electrode. In addition, significant raw material costs are required, such as for $Li_3PO_4$, which is used a lot during the salt purification process.