• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.371-376
• /
• 2005

In this paper, a new a new full-bridge soft-switching phase shift PWM DC-DC Converter has been proposed, which is suitable for fuel cell based power generation system. The proposed converter has outstanding advantage over the conventional DC-DC converter with respect to high efficiency, high power density, and hish component utilization. In special. the proposed converter has predominant high boosting output voltage and high efficiency characteristics under the inherently severs low output voltage of the fuel cell through the overall load conditions. Moreover, the developed converter has been experimentally tested with the help of a fuel cell simulator, and can generate the V-I characteristics of proton exchange membrane(PEM) fuel cell, so that the performance of the proposed converter could be effectively examined and the validity of the converter could be verified.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.184-190
• /
• 2014

Fuel cell power system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. In recent years, railway field as well as mobile fuel cell power system is being studying actively with development of hydrogen storage technologies. This paper presents the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. it is confirmed that proposed fuelcell-battery hybrid system shows good response characteristic about speed and torque based on design of parameter on system. Also as results of response for proposed system modeling, it show that powering mode and braking mode of system is controlled by switching devices of converters.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.61-68
• /
• 2004

최근, 연료전지는 새로운 발전시스템으로 주목받고 있다. 연료전지는 저전압/대전류의 전기적 특성을 가진다. 그러므로 일반 상용부하에 적용하기 위해서는 승압용 컨버터와 인버터가 필요하다. 제안된 시스템은 연료전지의 전압을 380[Vdc]로 승압하기 위한 절연형 DC-DC 컨버터와 단상 220[Vac]로 변환하기 위한 LC 필터를 가진 PWM 인버터로 구성된다. 또한, 연료전지 발전시스템용 양방향 DC-DC 컨버터는 부하 응답 특성을 개선시키기 위하여 구성하였다. 본 논문에서는 풀 브리지 컨버터와 단상 인버터를 설계하고 제작하였으며, 시뮬레이션과 실험을 통해 연료전지 발전 시스템이 분산전원에 적용이 가능함을 보여준다.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1013-1020
• /
• 2004

The hybrid system of gas turbine and fuel cell is expected to produce electricity more efficiently than conventional methods, especially in small power applications such as distributed generation. The solid oxide fuel cell (SOFC) is currently the most promising fuel cell for the hybrid system. To realize the conceptual advantages resulting from the hybridization of gas turbine and fuel cell, optimized construction of the whole system must be the most important. In this study, parametric design analyses for pressurized GT/SOFC systems have been peformed considering probable practical limiting design factors such as turbine inlet temperature, fuel cell operating temperature, temperature rise in the fuel cell and soon. Analyzed systems include various configurations depending on fuel reforming type and fuel supply method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.545-548
• /
• 2005

There is a close relation between the heat generation in the fuel cell stack and the fuel cell performance. In PEM fuel Gell vehicles, the stack coolant temperature is about $65^{\circ}C$, which is far lower than that for general automobile engine. Therefore, it is hard to release heat generated in the stack by using a radiator of limited size because of the reduced temperature difference between the coolant and the ambient air. In this study, indirect stack cooling system using $CO_2$ heat pump was designed and its stack cooling performance in releasing heat to the ambient was investigated. This work focuses on a series of processes that grasp the relation among the fuel cell power, the radiator capacity and the stack temperature. The purpose of this work is to find out a way to properly release sufficient amount of heat through the finite sized radiator, so that the stack power general ion can not be deteriorated due to the stack temperature increase. The optimization between the compressor power consumption and the fuel cel1 output power can be carried out to maximize the performance of fuel cell system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.100-103
• /
• 1997

Korea Electric Power Corporation (KEPCO) started a fuel cell project to develop alternative sources of electric power because of the rapid increase in power demand and global environmental problems. For the development of a molten carbonate fuel cell (MCFC), KEPCO started the project in 1993 to develop a 2 kW MCFC system and finished it at the end of 1996. In this project, $ASPEN^+$ was utilized to design the 2 kW MCFC generation system. Based on this simulation, a power generation system was designed and installed for operation and a long term test of internally manifolded 2 kW class MCFC stack. This stack has 20 cells with an effective electrode area of $1000\;cm^2$. It was run at 0.84 V and $150\;mA/cm^2$ and was operated for more than 3,250 hours continuously. This paper describes the system configuration and its control and measurement units. An analysis of the stack performance, the effect of gas utilization ratio, and the stack performance requirements are also discussed.

• 자원ㆍ환경경제연구
• /
• 제27권4호
• /
• pp.613-637
• /
• 2018

분산전원으로서의 장점을 지닌 연료전지는 높은 투자비용과 전력가격의 불확실성에 영향을 받는다. 본 논문에서는 연료전지 투자의 비가역성과 전력가격의 불확실성을 고려한 실물 옵션 모형을 제시하도록 한다. 대부분의 실물옵션 모형은 분석의 편의상 기하학적 브라운 과정을 가정하지만, 본 연구에서는 평균회귀적인 전력가격의 특성을 반영한 경제성 평가모형을 개발하되 투자옵션 가치의 닫힌 해 또한 제시하도록 한다. 20MW급 연료전지 발전을 위한 데이터와 국내 RPS 상황을 고려한 실증분석 결과, 가격 불확실성을 고려하지 않은 경우 연료전지 발전의 투자 경제성은 확보되지만, 가격 불확실성이 존재할 경우 경제성이 저감되는 것으로 나타났다. 이는 연료전지 발전시설의 도입 및 활성화를 위해서 수입과 비용을 포함하는 종합적인 수익구조 개선 외에도 정책적 지원이 추가적으로 필요함을 시사한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1389-1390
• /
• 1997

The object of this research is to develop various composing material for Solid Oxide Fuel Cell generation system, and to test single cell performance manufactured. So we try to present a guidance for developing mass power generation system. We concentrated on development of manufacturing process for cathode, anode and electrolyte.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.307-318
• /
• 2010

In this work, an accurate analysis of low frequency current ripple in residential fuel cell power generation systems is performed based on the proposed residential load model and its unique operation algorithm. Rather than using a constant dc voltage source, a proton exchange membrane fuel cell (PEMFC) model is implemented in this research so that a system-level analysis considering the fuel cell stack, power conditioning system (PCS), and the actual load is possible. Using the attained results, a comparative study regarding the discrepancies of low frequency current ripple between a simple resistor load and a realistic residential load is performed. The data indicate that the low frequency current ripple of the proposed residential load model is increased by more than a factor of two when compared to the low frequency current ripple of a simple resistor load under identical conditions. Theoretical analysis, simulation data, and experimental results are provided, along with a model of the load usage pattern of low frequency current ripples.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.27-34
• /
• 2023

고체 산화물 연료전지의 연료로 암모니아를 사용하는 것은 고효율, 환경 친화성, 보관 및 운송의 용이성으로 인해 주목받고 있다. 암모니아 활용 SOFC 시스템의 효율을 더욱 높이려면 시스템의 비효율적인 구성 요소를 이해해야 하며 이를 위해 엑서지 분석을 수행하였다.본 연구에서는 단순 연료전지 시스템(FC), 연료극 재순환 시스템(RC-FC) 및 수분 제거 재순환 시스템(RC-WR-FC)의 세 가지 시스템에 대해 엑서지 분석을 수행하였다. FC, RC-FC 및 RC-WR-FC의 엑서지 효율은 각각 48.7%, 51.6% 및 58.4%이었으며, 세 시스템 모두에서 SOFC 스택은 엑서지 파괴의 주요 원인이었다. 또한 버너, 공기 열 교환기 및 냉각기/응축기와 같이 낮은 효율을 가진 부품들을 재구성한다면 효율을 높일 수 있다.