• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.442-455
• /
• 2010

Plant factory is the fruit of the most advanced modern agricultural technology. This is a crop-producing technology that controls systematically sowing, cultivating, and harvesting crops within an indoor factory. Growing crops in a factory has advantages over traditional farming because it produces safer crops all year around due to clean environment and it is easier to hire workers at the factory. Developed countries has invested actively in this field for several decades because its economical and industrial impact are predicted to be enormous. Recently, Korea also begins to investigate this field actively to develop a system that may be competitive at global market, using technologies and human resources that Korea already has. The plant factory technology is currently less competitive than traditional farming because it requires a large initial investment and management cost and lacks cultivation technologies for various crops. However, I believe in solving these problems if plant biotechnologists participate in developing the plant factory system. If this technology is developed well in Korea, then it will play a great role in solving food and environmental issues.

• Journal of Climate Change Research
• /
• v.9 no.3
• /
• pp.263-271
• /
• 2018

Considering the high needs of recipient countries and the regional biases of Korean Official Development Assistance (ODA) policy, increases in the total amount of ODA and allocation to the forest sector are needed for Central Asia. In Tajikistan, illegal harvesting and grazing cause a gradual decrease in forest area. The Tajikistan government conserves forests by requesting international cooperation and establishing a policy for sustainable management of forest resources and prevention of further damages. To suggest suitable strategies and plans, the current statuses of forests and forestry were investigated, and ODA projects that can illustrate successful Korean experiences of forestation were conceived based on various geographical features and local conditions of Tajikistan in this study. Forest resource creation type projects (fuelwood and Tugai forest restoration) could result in energy independence and enhancement of ecosystem service such as a climate regulation and an increase in biodiversity. Community development type projects (introduction of ecotourism, agroforestry, and planting of fruit trees) can contribute to job creation and encourage participation of local residents, thus improving their incomes. In addition, establishment of a project foundation, including education, training, and a national forest inventory, would help those projects be sustainable in the long-term.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.331-333
• /
• 2018

The incorporation of Shiitake culture into sawdust is a widely utilized technique that can assist in reducing the cost and time consumption associated with oak cultivation. In sawdust cultivation, browning of the surface mycelia is an important stage with respect to the utility and longevity of the sawdust media. Surface browning forms a protective coating on the substrate, which can inhibit the invasion of pathogens and suppress water evaporation. Several different light sources (red LED, white LED, blue LED, and fluorescent light) were used and the intensity of illumination was carefully controlled (1.5, 10.5, $20.5{\mu}mol/m^2s$ for LEDs and 10, 100, 300 lux for the fluorescent light) to induce browning. The light sources were regulated via a 1 h on/off cycle in a controlled room environment at a temperature of $20^{\circ}C$, 60% humidity, and 1200 ppm $CO_2$ concentration for 60days. The browning effect varied depending on the source and the intensity of illumination. This effect was most effectively induced at $1.5{\mu}mol/m^2s$ for the red and blue LEDs. All light sources induced less browning at the highest intensity of illumination. This indicates that intensity values higher than $20.5{\mu}mol/m^2s$ in the case of the LEDs and 300 lux for the fluorescent light are not effective. After harvesting of the fruit bodies, we measured the weight, length, and width of the pileus and stipe in addition to their chromaticity and hardness. Treatment with $1.5{\mu}mol/m^2s$ blue LED produced the best harvest with the highest average chromaticity, weight (21.2 g), stipe length (30.8 mm), and hardness (377.9 g), with a fine length and width of the pileus.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.237-245
• /
• 2022

Peach is a typical summer fruit which can be used for various food, processed food, and fragrance ingredients in Korea. Peach is also known as one of serious allergens which make difficulty for farm workers during peach sorting operations. After peach harvesting, it moves to the sorting operations for removing cover material, removing fuzz on peach surface, sorting by size, and packing. The air-samplers and optical particle counters were used to analyze the characteristics of fine dust generation by location and operation characteristics in the experimental peach farms. During removing peach fuzz, the dust concentrations were increased by 6.89 times on total suspended particulate (TSP), 2.13 times on PM-10 (particulate matter), and 1.30 times on PM-2.5 compared to non-working periods, respectively. During removing peach covering materials, the dust concentrations were increased by 3.14 times on TSP, 1.91 times on PM-10, and 1.43 times on PM-2.5 compared to non-working periods, respectively. This represents peach fuzz can be affected to farm workers during peach sorting operations.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.78-87
• /
• 2023

This study was conducted to evaluate the effect of different 1-methylcyclopropene (1-MCP) concentrations on fruit quality of small-sized RubyS apples during cold storage. After harvesting, the fruits were treated with 1-MCP at 0.5 or 1 µL/L concentrations and, subsequently, stored at 0℃ for 6 months. After 6 months, the flesh firmness of untreated fruits, which was 85.4 N at harvest, had gradually decreased to 46.5 N; however, that of 1-MCP-treated fruits was maintained at 59.1 and 59.5 N. Titratable acidity (TA) of untreated fruits had also decreased from 0.42 to 0.24%, whereas that of 1-MCP-treated fruits was maintained at 0.26 and 0.27%. Soluble solids content (SSC) did not differ in all fruits. However, the 1-MCP-treated fruits had lower levels of SSC/TA ratio than untreated fruits. Moreover, after 6 months, the ethylene production had increased to 47.0 µL/kg/h in the untreated fruits, whereas 1-MCP blocked the ethylene production at 1.4 and 1.7 µL/kg/h. The weight loss and peel color variables remained unaffected by 1-MCP treatments. Thus, these results indicated that, for RubyS apples, the storability was only 2 months at 0℃ without treatment, which can be extended to 6 months with 1-MCP treatments. The application of 1-MCP at 0.5 µL/L concentration is effectively and economically sufficient to maintain the quality of RubyS apples.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.274-284
• /
• 2014

Crops and varieties are mostly affected by temperature, the amount of precipitation, and duration of sunshine. This study aims to identify the weather factors that directly influence to apple yield among the series of daily measured weather variables during growing seasons. In order to identify them, 1) a priori natural scientific knowledge with respect to the growth stage of apples and 2) pure statistical approaches to minimize bias due to the subject selection of variables are considered. Each result estimated by the Panel regression using fixed/random effect models is evaluated through suitability (i.e., Akaike information criterion and Bayesian information criterion) and predictability (i.e., mean absolute error, root mean square error, mean absolute percentage). The Panel data of apple yield and weather factors are collected from fifteen major producing areas of apples from 2006 to 2013 in Korea for the case study. The result shows that variable selection using factor analysis, which is one of the statistical approaches applied in the analysis, increases predictability and suitability most. It may imply that all the weather factors are important to predict apple yield if statistical problems, such as multicollinearity and lower degree of freedom due to too many explanatory variables used in the regression, can be controlled effectively. This may be because whole growth stages, such as germination, florescence, fruit setting, fatting, ripening, coloring, and harvesting, are affected by weather.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.53-53
• /
• 2017

연구목적: 국내 과일 산업의 한 단계 도약과 대외 경쟁력을 높이기 위해서는 수확작업의 기계화가 시급함. 이 연구는 국내외 과일 수확 기계화 현황과 문제점을 분석하고, 향후 수확작업 기계화 방향을 제시하고자 수행 수확기계 실용화 현황 및 고찰 (국내) 과일을 직접 수확이 아닌 수확 작업을 보조해주는 고지 작업기(수동형, 모터 진동형)와 고소 작업차가 대부분임. 수동형은 사과 감 등을 수확하지만, 작업능률이 낮고 작업자가 쉽게 피로하여 장시간 작업이 불가능하므로 실질적인 대안이 되지 못함. 진동형은 자체 동력을 이용하여 나무에 진동을 가하여 주로 대추 매실 등 소과류 수확에 이용되고, 수확능률은 우수하나 충격 손상이 많아 개선이 요구됨. 고소작업차는 동력원에 따라 충전식과 엔진식으로 구분되고, 충전식은 엔진식에 비해 진동 소음이 적어 쾌적하지만, 작업시간이 배터리 용량에 제한을 받음. 또한 작업대 작동방식에 따라 리프트형과 붐형으로 구분함. 리프트형은 리프트를 이용하여 작업대를 상하로 구동하는 방식으로 높은 위치의 과실 수확이 어렵고, 작업대 넓이 만큼의 작업 공간(과수간의 거리)이 필요함. 붐형은 필요한 곳으로 접근성이 우수하나 무거운 무게를 지탱하기 어렵기 때문에 본체를 무겁게 하거나 수시로 수확된 과일을 하차시켜야 함. (국외) 수확 후 가공되는 과일류와 포도 올리브 오렌지 매실 등 소과류 수확이 기계화되었지만, 사과 복숭아 등 신선과일은 아직도 외국의 값싼 노동자들에 의존하여 수확되고 있음. 현재 실용화된 수확 기계는 진동식 수확기계와 터널식 수확기계가 대표적임. 진동식은 집게형의 부착기를 나무 줄기에 고정한 후 트랙터 동력원으로 나무에 진동을 가하여 수확하고, 올리브 대추 등과 같은 소과류와 과피가 두꺼운 오렌지 등에 적용되고, 수확 작업능률이 매우 높으나 과일의 낙하 상처를 피할 수 없는 단점이 있음. 터널형은 규격화(과수 크기 및 형태, 재식거리)된 과수원에 잘 적응하도록 설계 제작되어, 과수 위를 지나가면서 내부에 설치된 진동장치와 컨테이너로 과일을 수확하고, 와인용 포도 수확기가 대표적임. 기계수확이 가능하도록 과수원 조성단계에서부터 재배양식(과수 좌우 및 전후 거리)을 기계의 제원(바퀴 간격, 작업부 간격 등)에 맞추어 재배함. 과일 수확로봇에 관한 연구는 활발하고 일부에서 실증시험단계에 있음. 결론: 구체적인 추진방향을 제시하면, 단기적으로는 과일 수확작업자의 작업편이성과 노동강도를 줄일 수 있도록 소형 저가 범용성이 우수한 보조기구/기계의 보급을 확대하고, 중장기적으로는 수확기계/수확로봇 개발을 위한 연구개발비 투자를 늘리는 동시에, 기계/로봇이 과수원에 잘 적응할 수 있도록 수형 재식거리 등 재배양식의 표준화가 추진되어야 함.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.167-173
• /
• 2014

This research was conducted to establish appropriate methods to prune tomato side stems during summer. Cherry tomatoes "Unicorn" (Monsanto Korea, Korea) were grown in the coir based growing medium, and irrigation was controlled time based system. There were three pruning treatments: 1) removing all side stems (ACUT), 2) remaining two leaves on the side stems right below any cluster (PCUT), and 3) remaining two leaves on all side stems (LEFT). Experimental results showed that the occurrence of swollen stems, a symptom of nutrient excess, was influenced by side stem pruning due to blocking of consumption of photosynthetic products. The photosynthetic rate was not different between leaves on main stem and those on side shoots. Therefore the differences in the total amounts of photosynthetic products seemed to come out from the differences in leaf areas on each treatments, influencing on fruit yield difference. The yields and harvesting rates were better in ACUT treatment when tomato plants were harvested until $5^{th}$ cluster, however tomato yield was higher in LEFT treatment when more then $5^{th}$ clusters were harvested.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.269-272
• /
• 2017

We developed a log-burying cultivation technique for Grifola frondosa using oak logs and surveyed its annual yield characteristics. As a result of G. frondosa log cultivation, the harvesting period of the 'Yipsae1ho' cultivar was delayed by approximately 10-15 days compared to that of the Dabak cultivar, and the fruit color of the 'Yipsae1ho' cultivar was dark brown, while that of the 'Dabak' cultivar was grayish brown. Yield of the 'Yipsae1ho' cultivar was $16.0 kg/m^2$ in the first year, $15.4kg/m^2$ in the second year, $9.5 kg/m^2$ in the third year, $4.6 kg/m^2$ in the fourth year, and $4.6kg/m^2$ in the fifth year, while yield of the 'Dabak' cultivar was $12.3kg/m^2$ in the first year, $11.5kg/m^2$ in the second year, $12.7kg/m^2$ in the third year, $6.2 kg/m^2$ in the fourth year, and $8.2kg/m^2$ in the fifth year. Total yield of the 'Yipsae1ho' cultivar ($50.0 kg/m^2$) was slightly lower than that of the 'Dabak' cultivar ($50.8kg/m^2$). The optimum period for log-burying cultivation of Grifola frondosa is estimated to be 3 years.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.264-268
• /
• 2017

In the 21st century, information and communication technology (ICT) worldwide presents a new vision for agriculture. Time and place, as well as the high-tech industry, to overcome barriers to the fusion of the so-called "smart agriculture," are changing the agricultural landscape. Core container production in precision agriculture for mushroom cultivation, optimal temperature, humidity, irradiation, self-regulation of factors such as carbon dioxide, and environment for mushroom cultivation were adopted. Lentinula edodes (shiitake) is an edible mushroom native to East Asia, cultivated and consumed in many Asian countries. It is considered to be medicinal in certain practices of traditional medicine. We used different controlled light sources (Blue-Red-White-combined LED, blue LED, red LED, and fluorescent light) with different LED radiation intensities (1.5, 10.5, and $20.5{\mu}mol/m^2s$ for LEDs) to compare growth and development. Mushrooms were treated with light in a 12-hour-on/12-hour-off cycle, and maintained in a controlled room at $19{\sim}21^{\circ}C$, with 80~90% humidity, and an atmospheric $CO_2$ concentration of 1,000 ppm for 30 days. Growth and development differed with the LED source color and LED radiation intensity. Growth and development were the highest at $10.5{\mu}mol/m^2s$ of blue LED light. After harvesting the fruit bodies, we measured their weight and length, thickness of pileus and stipe, chromaticity, and hardness. The $10.5{\mu}mol/m^2s$ blue-LED-irradiated group showed the best harvest results with an average individual weight of 39.82 g and length of 64.03 mm, pileus thickness of 30.85 mm and pileus length of 43.22 mm, and stipe thickness of 16.96 mm with fine chromaticity and hardness. These results showed that blue LED light at $10.5{\mu}mol/m^2s$ s exerted the best effect on the growth and development of L. edodes (shiitake) mushroom in the ICT-system container-type environment.