• Journal of Embryo Transfer
• /
• v.30 no.1
• /
• pp.7-15
• /
• 2015

The objective of this study was to investigate the efficiency of nicotinic acid on sperm cryosurvival and fertilization ability in frozen-thawed boar semen. Boar semen was collected by glove-hand method and was frozen using freezing solution treated to 0, 5, 10 and 20 mM of nicotinic acid. The frozen sperm for sperm characteristic analysis was thawed such as viability, acrosome reaction, and mitochondrial integrity. The frozen-thawed sperm was estimated by SYBR14/PI double staining for viability, FITC-PNA/PI double staining for acrosome reaction and Rhodamine123/PI double staining for mitochondrial integrity using a flow cytometry. The embryo was estimated in vitro development and DCFDA staining for reactive oxygen species assessment. As results, frozen-thawed sperm viability was significantly higher in 5 and 10 mM ($61.1{\pm}1.5%$,$64.7{\pm}2.0%$) of nicotinic acid than other groups (0 mM, $52.1{\pm}2.3%$; 20 mM, $47.8{\pm}5.1%$, P<0.05). The live sperm with acrosome reaction was significantly higher in 5 and 10 mM of nicotinic acid ($26.1{\pm}1.8%$, $24.9{\pm}1.5%$) than other groups (0 mM, $35.3{\pm}0.8%$; 20 mM, $36.5{\pm}1.9%$, P<0.05). The live sperm with mitochondrial integrity was significantly higher in 5 and 10 mM ($84.2{\pm}3.6%$, $88.4{\pm}2.3%$) of nicotinic acid than other groups (0 mM, $77.3{\pm}4.4%$; 20 mM, $73.3{\pm}3.6%$, P<0.05). Blastocyst rate of in vitro development was significantly higher in 10 mM ($17.0{\pm}1.3%$) of nicotinic acid than other groups (0 mM, $9.4{\pm}0.5%$; 5mM, $12.6{\pm}0.8%$; 20 mM, $5.0{\pm}1.0%$, P<0.05). Moreover, total cell number was higher in 5 and 10 mM ($53.6{\pm}2.9%$, $57.9{\pm}2.8%$) of nicotinic acid than other groups (0 mM, $41.0{\pm}1.4%$; 20 mM, $23.2{\pm}2.8%$, P<0.05). Hydrogen peroxide in embryos was lower in 5 mM nicotinic acid ($0.7{\pm}0.1%$) than other groups (0 mM, $1.0{\pm}0.1%$; 10mM, $0.9{\pm}0.0%$; 20 mM, $1.4{\pm}1.0%$, P<0.05). In conclusion, nicotinic acid-treated semen improves cryosurvival and quality of spermatozoa. Also, the fertilized oocytes with nicotinic acid improve quality of embryo and blastocyst formation.

• Clinical and Experimental Reproductive Medicine
• /
• v.32 no.3
• /
• pp.243-251
• /
• 2005

Objective: Low-dose aspirin have been proposed to improving endometrial receptivity and pregnancy rate in COH-IVF by increasing endometrial perfusion. However, the effect of low-dose aspirin in COH-IVF could be negligible because there have been large quantity of other important factors responsible for changing endometrial perfusion accompanied by COH procedure. In contrast, in frozen-thawed embryo transfer cycles which were not accompanied by COH procedure, the effects of low-dose aspirin in endometrial blood flow seems to be more certain than in COH-IVF cycles. In this study, we analyzed the effect of low-dose aspirin treatment on implantation and pregnancy rates in patients undergoing frozen-thawed embryo transfer Methods: From January 2003 to December 2003, total 264 cycles from 264 patients who attended infertility clinic at Samsung Cheil Hospital were enrolled in this study. All cases included in this study, embryos were frozen and thawed at the pronuclear stage and three days after incubation, at least 2 or more good quality embryos were transferred into uterus. In study group, low dose aspirin (100 mg/day) was administrated from the first or second date of menstrual day to 9 days after embryo transfer. On the other hand, control group did not take any medicine except estradiol valerate for endometrial priming. Several variables including implantation and pregnancy rates were compared in both groups. After then, each groups were stratified by endometrial thickness checked at embryo transfer (ET) day such as (28 mm versus <8 mm) and same variables above described were compared between study and control groups. Results: The mean age, infertility duration, endometrial thickness at embryo transfer day and mean number of transferred embryo were not significantly different in both groups. Also, implantation rates (study group: 15.8%, control group: 20.5%) and pregnancy rate (study group: 45.1%, control group: 43.5%) were not significantly different between two groups. (p>0.05) After we analyzed same variables stratified by endometrial thickness checked at embryo transfer day, we could not found any significant difference between study and control groups. Conclusions: Low-dose aspirin treatment seems to have no advantage of improving implantation and pregnancy rates in patients undergoing frozen-thawed embryo transfer.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.516-519
• /
• 2000

Generally pancreas consist of lipid, water and protein, digestion enzyme complex (pro-tease, lipase, amylase). The sample used in this work was frozen dry and treated by a semi-batch flow type. In order to develop a supercritical fluid extraction process to rem-ove lipid from the pancreas, experiments were conducted at various operating conditions(pressure range $1500{\sim}2800psi$, temperature range $25{\sim}40^{cdot}C$, particle size$(0.25{\sim}1.0mm$, flow rate $20{\sim}80m{\ell}/min)$. Also cholesterol in the pancreas was removed. The highest extraction efficiency was 2500psi, $35^{\cdot}C$, 0.25mm of pancreas size. The enzyme activity of the pancreas produced from this work showed high value compared with imported pancreas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3827-3834
• /
• 2012

Recently, instead of hot air type dryers that require a lot of heat, energy-efficient heat pump dryers have been used in various fields such as paper, textile, wood, food, etc. In this paper, the characteristics of heat pump cycle were theoretically evaluated with hot-gas bypass system to further improve the energy efficiency by minimizing the use of electric heaters in early warm-up stage of the dryers for frozen agricultural products. In addition, damper system that leads outside air to flow into the dryer were optimized to obtain extra heat for higher energy efficiency.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.62-75
• /
• 2001

The design and manufacture of injection molded polymeric parts with desired properties is a costly process dominated by empiricism including repeated modification of actual tooling. This paper presents and expert design evaluation system which can predict the mechanical performance of a molded product and diagnose the design before the actual mold is machined. The knowledge-based system synergistically combines a rule-based expert system with CAE programs. An iterative boundary pressure reflection method(IBPR) is developed to automate the cavity filling simulation program and to predict thermo-mechanical properties of a molded part precisely. Mathematical models of weldline and frozen-in molecular orientation are established to determine the spatial variation of microstructural anisotropies of a molded part from the result of cavity filling simulation. The strength ellipse is devised as and index which represents th spatial distribution of the microstructural anisotropies of a molded part, Heuristic knowledge of injection molding, flow simulation, and mechanical performance prediction is formalized as rules of an expert consultation system. The expert system interprets the analytical results of the process simulation, predicts the performance, evaluates the design and generates recommendations for optimal design alternative.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.136-136
• /
• 2017

In agriculture, the rice is the one of important things. Many farmers and scientists have long tried to increase the yield of rice. So many technologies have been developed these days. One type of technology has given rise to a host of concerns and questions, namely Genetically Modified Organisms (GMOs). The increasing cultivation of GM crops has raised a wide range of concerns with respect to food safety, environmental effects and socio-economic issues and now commercially planted on about 100 million hectares in some 22 developed and developing countries. The scientific evidence concerning the environmental and health impacts of GMOs is still emerging, but so far there is no conclusive information on the definitive negative impacts of GMOs on health or the environment. Nevertheless, public perceptions about GMOs in food and agriculture are divided with a tendency toward avoiding GM food and products in many developed and developing countries. Also Korea is one of that country and is not allow the GMOs now. So I studied whether these GMOs are actually dangerous for environment and whether there are differences in cultivar characteristics such as germination test with TTC tetrazolium, germination test in frozen soil and gene-flow test with glufosinate and strip-bar test. With these experiments, we evaluated the agricultural safety of GM rice and to identify and assess environmental risks.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.327-334
• /
• 2004

Spectroscopic and electrostatic probe measurements were made to examine plasma characteristics with or without a metal plate for a 10-㎾-class direct-current arcjet Heat fluxes into the plate from the plasma were also evaluated with a Nickel slug and thermocouple arrangement. Ammonia and mixtures of nitrogen and hydrogen were used. The NH$_3$ and $N_2$+3H$_2$ plasmas in the nozzle and in the downstream plume without a plate were in thermodynamical nonequilibrium states. As a result, the H-atom electronic excitation temperature and the $N_2$ molecule-rotational excitation temperature intensively decreased downstream in the nozzle although the NH molecule-rotational excitation temperature did not show an axial decrease. Each temperature was kept in a small range in the plume without a plate except for the NH rotational temperature for NH$_3$ gas. On the other hand, as approaching the plate, the thermodynamical nonequilibrium plasma came to be a temperature-equilibrium one because the plasma flow tended to stagnate in front of the plate. The electron temperature had a small radial variation near the plate. Both the electron number density and the heat flux decreased radially outward, and an increase in H$_2$ mole fraction raised them at a constant radial position. In cases with NH$_3$ and $N_2$+3H$_2$ a large number of NH radical with a radially wide distribution was considered to cause a large amount of energy loss, i.e., frozen flow loss, for arcjet thrusters.

• Clinical and Experimental Reproductive Medicine
• /
• v.49 no.2
• /
• pp.87-92
• /
• 2022

Objective: The aim of this study was to determine the effects of melatonin and selenium in freezing extenders on frozen-thawed rat sperm. Methods: Semen samples were collected from 20 adult male Wistar albino rats. Following dilution, the samples were divided into six groups: four cryopreserved groups with 1 mM and 0.5 mM melatonin and selenium supplements, and two fresh and cryopreserved control groups. The rapid freezing technique was used to freeze the samples. Flow cytometry was used to assess plasma membrane integrity, mitochondrial membrane potential, and DNA damage, while computer-assisted sperm analysis was used to assess motility. Results: Total motility was higher in the 1 mM melatonin supplementation group than in the cryopreserved control group (mean±standard error of the mean, 69.89±3.05 vs. 59.21±1.31; p≤0.05). The group with 1 mM selenium had the highest plasma membrane integrity (42.35%±1.01%). The cryopreserved group with 0.5 mM selenium had the highest mitochondrial membrane potential, whereas the cryopreserved control group had the lowest (45.92%±4.53% and 39.45%±3.52%, respectively). Conclusion: Cryopreservation of rat semen supplemented with 1 mM melatonin increased sperm motility after freeze-thawing, while supplementation with 0.5 mM selenium increased mitochondrial activity.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.363-367
• /
• 2011

The purpose of this study was to improve of frozen-thawed sperm using magnetized water in Korean native cattle. Before cryopreservation, without egg-yolk Triladyl$^{(R)}$ solution was flowed though magnet [0, 2000, 4000 and 6000 Gauss(G)] for S min. The freezing of dilluted semen added with Triladyl containing 20% egg-yolk. Analysis of frozen-thawed sperm was estimated viability with SYBR14/PI double stain, membrane intact with hypoosmotic swelling test (HOST), acrosome reaction with FITC-PNA, mitochondria membrane function with Rhodamin 123 by flow- cytometry. Sperm viability was significantly higher in 4000G group than other groups (p<0.05). However, the Hypoosmotic Swelling Test(HOST) was significantly higher in fresh, 4000 and 6000G than 0 and 2000G (p<0.05). In addition, mitochondria membrane damage and acrosome damage were significantly lower in 6000G group than other groups (p<0.05). in conclusion we suggest that magnetized water could be improve ability of sperm on cryopreservation in Korean native cattle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6047-6052
• /
• 2013

A cosmetic manufacturing process requires a mold that is inevitable for mass production. Cosmetic containers are one of major factors affecting the customer's purchase decision. In addition, the manufacturing cost in cosmetic container comprises a large portion of the entire product cost. Therefore, a mold satisfying the economical feasibility, aesthetics and functionality is necessary. Among the cosmetic containers, square shape containers have a tendency of having a short shot defect product. The square shaped cosmetic containers are mostly produced as a side gate shape on the two-plate molds. On the other hand, there are two disadvantages, such as gate trace and post processing requirement. The overlap-gateproposed in this study has the characteristics of intaglio gate cutting and no need for post processing. The delivery system of the overlap gate was simulated and compared with the side gate via Moldflow. The improvement in flow, frozen rate, density, and Air trap was confirmed. Based on the simulation results, the mold and performed injection molding was fabricated. In this study, the possibility of the mass production of high aesthetic and functionality cosmetic containers was verified.