• 펄프종이기술
• /
• 제33권1호
• /
• pp.16-23
• /
• 2001

Hydraulic transport of fines up to the surface of flotation cell was supposed to be a mechanism of fines fractionation through the froth-flotation. Efficient fractionation of fines means efficient skimming out of flotation rejects as much as possible with least long fiber loss. The selectivity of fines fractionation was found to be mainly affected by long fibers flocculation degree in this study. Lack of sufficient flocculation of long fibers could lead to extensive loss of long fibers. It was also found that higher flotation flux caused higher flotation reject as well as the increase of long fiber loss, but did not affect the fine content ratio in the flotation reject. We controlled the flotation flux and the stock consistency, and chose a cationic polymer to maximize the flocculation of long fibers and to increase the amount of flotation reject. The highest efficiency of fines fractionation was obtained at 1.3% of stock consistency and at 100L/min of flotation flux in our experimental set up. The cationaic polymer we chose was found to be very effective in fiber flocculation and flotation froth stabilization. New definitions of fractionation efficiency were introduced in this study to compare the results more clearly.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.18-26
• /
• 2000

In order to investigate the influencing factors in flotation fractionation, flotations were performed at varied conditions. The selectivity of fines fractionation was mainly affected by long fiber flocculation degree and if there were not sufficient flocculation of long fibers, more loss of long fibers could not be avoided. The amount of flotation rejects were totally dependent on the stability of froth floated on the stock surface. Only small size fines could stabilize the froth as they hindered the drainage of liquid lamella in flotation-froth. More flotation reject and better flocculation of long fibers were two important factors for improving flotation. Changing a flotation flux or an air-mixing ratio to increase the flocculation of fibers increased long fiber ratio in the reject. In order to satisfy the both conditions of reducing long fiber loss and of increasing flotation reject, search of fractionation promoter is needed.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.27-33
• /
• 2000

A new technique for fractionating pulp stock into a long fiber portion and fines fraction was developed by KRICT in order to enhance the drainage and strength properties of recycled OCC pulp. In order to investigate the effect of fines contents in stock and stages of flotation on fractionation efficiency, flotations were performed at varied fines contents and flotation stages. Based on the result of multi-stage flotation fractionation it could be said that fines smaller than 15${\mu}{\textrm}{m}$ stabilize flotation froth of OCC. Although the amounts and the fines contents of flotation reject could be increased by multi-stage flotation fractionation of OCC, flotation stages more than 3 times were found to be inefficient in terms of fines concentrating degree. In order to satisfy the both conditions of reducing long fiber loss and of increasing flotation reject, several kinds of fractionating promoters were searched and investigated. And high molecular weight cationic polyacrylamide was chosen as a long fiber flocculating and flotation froth-stabilizing agent.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 추계학술발표논문집
• /
• pp.205-214
• /
• 1999

In order to investigate the influencing factors of flotation fractionation. flotations were performed at varied conditions. The selectivity of fines fractionation is mainly affected by long fibers flocculating degree and if it were not for sufficient flocculation of long fibers, increase of long fibers loss could not be avoided. The amount of flotation reject totally depends on the stability of forth floated on the stock surface. only the small size fines stabilize the froth as they hinder the drainage of liquid lamella in flotation-froth. Two important factors of flotation conditions are improving the flocculation of long fibers and increasing the amount of flotation reject. Changing a flotation flux or an air-mixing ratio with aims of increasing the flocculation of fibers and reject ratios is in conflict. In order to satisfy the both conditions for reducing long fiber loss and for increasing flotation reject a new fractionation promoter is urgently required.

• 대한환경공학회지
• /
• 제38권7호
• /
• pp.343-352
• /
• 2016

이 논문은 실험실 규모의 표면분쇄와 부유선별을 이용하여 비소로 오염된 중국 농경지 토양을 처리하기 위한 분쇄시간의 변화 및 $C_5H_{11}OCS_2K$, $Na_2S$와 $CuSO_4$의 사용량 변화에 대한 평가를 제시한다. 현장시료는 비소농도 76.51 mg/kg으로 한국과 중국의 기준치를 모두 초과하였고, 토양시료 내 비소화합물의 형태는 단계추출법에 의해 '잔류상'이 지배적인 것으로 나타났다(80% 이상). 또한 X-선 회절분석을 통하여 밝혀진 비소성분은 FeAsS, $As_4O_6$, $As_2O_5$ 화합물형태로 존재하는 것으로 확인되었다. 표면분쇄공정에 의해 원시료로부터 탈리된 입자의 비소농도는 분쇄경과시간 5분경 최대치에 달했으며, 이때의 농도는 981.66 mg/kg를 나타냈다. 비소함량이 높은 분쇄입자를 원시료로부터 선택적으로 분리하기 위해 부유선별공정에 사용된 $C_5H_{11}OCS_2K$, $Na_2S$과 $CuSO_4$의 최적 주입량은 각각 200 g/ton으로 결정되었고, 추가로 수행된 2차 부유선별인 청소부선을 통해서 침강물에서의 최대 비소제거 효율은 72.74%까지 증가하였다. 표면분쇄와 포말부선공정을 조합하여 처리된 정화토양의 입도는 >2, 0.075-2 mm와 <0.038 mm이었고, 이 정화토양의 중량분율은 각각 1.76, 18.00, 64.44 wt% 그리고, 최종정화산물의 평균 비소농도는 16.45 mg/kg로 산출되었다.

• 자원리싸이클링
• /
• 제22권5호
• /
• pp.43-49
• /
• 2013

상동광산 광물찌꺼기로부터 As를 제거하기 위하여 부유선별을 실시하였다. 상동광산 광물찌꺼기를 토양오염공정시험법으로 분석한 결과, As가 282 mg/kg 으로 1지역 대책기준(75 mg/kg)을 초과하고 있어 심각한 수준 이였다. 먼저 포수제와 기포제를 K.A.X와 DF250으로 선정 한 후, pH 변화에 따른 실험을 통해 pH 6일 때 제거율이 91%로 성적이 가장 우수하였다. 교반속도(rpm)에 따른 실험에서는 rpm이 1,500일 때 As 제거율이 80%로 가장 높았다. K.A.X 첨가량에 따른 실험에서는 300 g/ton 에서 93%로 높은 제거효율을 보였으며, 광액의 농도에 따른 실험에서는 30%일 때 93%의 높은 제거효율을 보였으며 침강물의 As 함량이 22.5 mg/kg으로 1지역 대책기준(75 mg/kg)을 초과하던 As를 1지역 우려기준치(25 mg/kg) 이하로 만족시킬 수 있었고, 최종적으로 상동광산 광물찌꺼기로부터 As를 원천적으로 제거할 수 있었다.

• 자원리싸이클링
• /
• 제8권3호
• /
• pp.43-48
• /
• 1999

석탄회로부터 미연탄소분을 제거하기 위한 처리방법으로 습식부유선별법을 적용하였고 이에 사용된 포수제는 한국자원연구소에서 개발한 "Carbon zero(C.Z)"서 기초 실허 a 및 Pilot 실험을 하여 미연탄소분 함량이 0.1%, 실수율 72%wt.와 Pilot 실험은 미연탄 소분 함량이 0.1%, 실수율 73%wt.을 얻었다.%wt.을 얻었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.129-136
• /
• 2006

Although cleaner and cheaper deinking of ONP could be performed at the neutral or low alkaline condition excessive loss from froth-flotation is unavoidable and so reduction of alkali or caustic soda dosage sacrifices recycling yield. Now the new trade-off regarding alkali dosage versus flotation yield is urgently required in order to set the optimized neutral or low alkaline deinking process of ONP. Lipase from Thermomyces Lanuginosus has an effect on desizing and deacetylation reaction and it could be applied to the stock of pre flotation secondary stage in order to reduce the flotation reject without the sacrifice of optical properties of flotation accepts. Instead of inorganic base, lipase could be applied as a biochemical catalyst for the selective modification of valuable hydrophobic particles in deinking stock, for example cellulose fines and inorganic fillers covered by hydrophobic additives or contaminants. When the enzymatic hydrolysis of ester bond could be made on the surface of hydrophobic particulates, unwanted float of fine particles could be prevented. Now the enhancement of flotation selectivity or the modification of the hydrophobicity of deinking stock is expected to be promoted by the enzymatic pre treatment. And the reduction of recycling cost with the saves of raw material, recovered paper would be possible as a result.

• 자원리싸이클링
• /
• 제19권6호
• /
• pp.77-85
• /
• 2010

가행중인 금(gold) 광산에서 발생하는 광미(tailing)로부터 금 및 실리카와 같은 유가자원을 회수하기 위해 선별특성을 검토하였다. 금 선별에는 고비증액(heavy liquid}을 이용한 비중선별(gravity separation)을 하였고, 실리카 선별에는 하이드로싸이클론을 이용한 분급/비중선별, 부유선별(froth-flotation) 그리고 마찰대전형 정전선별 (triboelectrostatic separation)을 하였다. 실험결과 금은 비중액의 비중이 2.72일 때 품위가 최고 5.58 g/ton인 정광을 약 3 wt.% 회수하였으며, $SiO_2$의 함량이 약 94%인 고순도 실리카를 회수할 수 있었다. 따라서, 본 연구를 통하여 환경을 훼손하는 광미의 감량 및 무해화는 물론 유가자원 회수를 위한 공정을 수립 할 수 있을 것으로 기대된다.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.88-95
• /
• 2015

The main sources of recovered paper for newsprint are old newsprint (ONP) and old magazine (OMG). Recently, a lot of advertisement flyers are flowing into bales of ONP and portion of OMG is increasing in recovered paper because the consumption level of coated paper increases. In this study, nonionic surfactant and fatty acid were used as the de-inking agent for froth-flotation process of mixed recovered paper to investigate the effect of increased mixing ratio of OMG. De-inking efficiency of nonionic surfactant decreased as the mixing ratio of OMG increased; ink removal efficiency of froth-flotation is poor, however, the reject ratio increases due to ash from OMG. In comparison with nonionic surfactant, the ash from OMG had a little effect on reject ratio and optical properties of fatty acid applied flotation accept. If nonionic surfactant and fatty acid are added to pulper and flotation cell sequentially, excessive ash from OMG may not give an adverse effect on de-inking efficiency of mixed recovered paper.