• 생물환경조절학회지
• /
• 제29권4호
• /
• pp.448-455
• /
• 2020

본 연구에서는 서리의 피해 저감을 위하여 과수 무봉지 재배를 목적으로 사용하고 있는 그물망을 이용하고자, 서리의 양을 관측하는 장치를 대조구와 시험구에 설치하여 그 비교를 통해 서리 저감 효과를 구명하였다. 시험 결과 실제 서리가 관측된 날을 기준으로 시험구에서 37%에서 59%까지 저감 효과를 확인할 수 있었다. 또한 서리의 양을 자동으로 관측하는 장치를 개발하고 풍동실험을 통해 서리 측정 장치의 방풍함 높이를 30 cm로 결정하였다. 이러한 연구 결과는 그물망 설치함으로써 과수 개화기에 서리 피해를 저감할 수 있을 것으로 판단되며, 그물망의 농업적 이용에 대한 기초자료로 활용될 수 있을 것으로 기대된다.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.1-4
• /
• 2011

The object of this experimental study is to investigate the effect on frost prevention and delay by the method of alternating the function of outdoor coil rows under the frost conditions ($2^{\circ}C/1^{\circ}C$). The heat pump system with the new method can make frost delay time longer and eliminate frost effectively. It is withstand over 280 minutes without a conventional defrosting method. Maximum COP in case of adopting new method is 13% higher than that in case of reverse cycle defrosting method. Also in case of moving air injection duct faster, the frost delay time is lengthened and its COP is enhanced more.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권2호
• /
• pp.66-75
• /
• 2006

The effect of antifreeze solution liquid film on the frost prevention is experimentally investigated. It is desirable that the antifreeze solution spreads widely on the heat exchanger surface forming thin liquid film to prevent frost nucleation while having small thermal resistance across the film. A porous layer coating technique is adopted to improve the wettability of the antifreeze solution on a parallel plate heat exchanger. The antifreeze solution spreads widely on the heat exchanger surface with $100{\mu}m$ thickness by the capillary force resulted from the porous structure. It is observed that the antifreeze solution liquid film prevents a parallel plate heat exchanger from frosting. The reductions of heat and mass transfer rate caused by the thin liquid film are only $1{\sim}2%$ compared with those for non-liquid film surface.

• 설비공학논문집
• /
• 제17권5호
• /
• pp.459-467
• /
• 2005

The effect of anti freezing solution liquid film on the frost prevention is experimentally investigated. It is desirable that the antifreezing solution spreads widely on the heat exchanger surface forming thin liquid film to prevent frost nucleation and reduce the thermal resistance across the film. A porous layer coating technique is adopted to improve the wettedness of the anti freezing solution on a parallel plate heat exchanger. The antifreezing solution spreads widely on the heat exchanger surface with 100 $\mu$m thickness by the capillary force resulting from the porous structure. It is observed that the antifreezing solution liquid film prevents a parallel plate heat exchanger from frosting. The reductions of heat and mass transfer rate caused by thin liquid film are only $1\~2\%$ compared with those for non-liquid film surface.

• 설비공학논문집
• /
• 제18권6호
• /
• pp.477-485
• /
• 2006

A study on frost prevention of fin-tube heat exchanger is experimently performed by spreading antifreezing solution on heat exchanger surface. It is desirable that the antifreezing solution spreads completely on the surface forming thin liquid film to prevent frost nucleation and crystal growth and to reduce the thermal resistance across the liquid film. A small amount of antifreezing solution falls in drops on heat exchanger surface using two types of supplying devices, and a porous layer coating technique is adopted to enhance the wettedness of antifreezing solution on the surface. It is observed that the antifreezing solution liquid film prevents fin-tube heat exchanger from frosting, and heat transfer performance does not degrade through the frosting tests. The concentration of supplied antifreezing solution can be determined by heat transfer analysis of the first row of heat exchanger to avoid antifreezing solution freezing due to dilution by moisture absorption.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1129-1135
• /
• 2011

Recently, In Korea region becoming subtropical climate, freezing index values have been increasing in winter. The climate condition in Korean became polarized. Since freezing index is increased recently, track heaving from frost is often occurred, which is ignored in past couple of years. Methods to prevent frost-heaving are circumfusion of calcium chloride and replacement of gravel ballast in usual. The effects of those methods are minimal, incontinuous, and not eco-friendly. Therefore, maintenances are performed repeatedly every year. This study discussed utilizing the waste-tire-chips and insulators in the small structures(bridge and box etc) for prevention of frost-heaving. In order to prove effect of waste-tire-chips, laboratory and field tests were conducted with CBR and measurement of frost-heaving amount to prove and verify effect of insulators.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.546-552
• /
• 2010

Seasonal frozen ground affects structural behavior in South Korea. Frost and heaving of seasonal frozen ground results in the critical damage of roadway, railroad, and buried pipeline. It has been widely used to substitute frost susceptible soils with granular soils. This paper presents experimental investigation on the effectiveness of soil-shredded tire and soil-expanded polystylene (EPS) mixtures to reduce frost depth and force around a buried pipeline. Experimental data such as measured temperature profile and the deformation of buried pipeline were carefully observed and provide the evidence of the effectiveness of soil mixtures.

• 한국콘텐츠학회논문지
• /
• 제11권11호
• /
• pp.42-48
• /
• 2011

본 논문에서는 교량구간의 도로 결빙예측 및 감지를 위한 시스템 설계를 제안하였다. 센서 노드의 하드웨어는 마이크로프로세서, 온도 센서, 습도 센서, 그리고 Zigbee 무선 통신으로 구성되었다. 관제센터의 소프트웨어는 관제센터에 수집된 교량 온도, 습도 데이터로 관찰하기 위하여 구현되었다. 교량 노면의 결빙은 노면의 온도가 이슬점 온도 이하이면서 영하일 때 발생한다. 제안된 시스템을 이용하여 도로면의 온도 및 습도 분포를 측정하였다. 측정 데이터는 도로 결빙이 발생하는 시점을 예측하기 위하여 사용되었다. 실제 결빙되는 것보다 최소 30분 이전에 결빙시점을 예측하여 경고가 이루어진다. 이 결과로 결빙으로 인한 교통사고를 방지하기 위하여 사용 할 수 있다.

• Geomechanics and Engineering
• /
• 제31권6호
• /
• pp. 583-597
• /
• 2022

Frost heave can cause uneven ground uplift that may damage geo-infrastructure. To assist damage-prevention strategies, standard frost heave testing methods and frost susceptibility criteria have been established and used in various countries. ASTM International standard testing method is potentially the most useful standard, as abundant experimental data have been acquired through its use. ASTM International provides detailed recommendations, but the method is expensive and laborious because of the complex testing procedure requiring a freezing chamber. A simple frost heave testing method using a temperature-controllable cell has been proposed to overcome these difficulties, but it has not yet been established whether a temperature-controllable cell can adequately replace the ASTM International recommended apparatus. This paper reviews the applicability of the ASTM International testing method using the temperature-controllable cell. Freezing tests are compared using various soil mixtures with and without delivering blow to depress the freezing point (as recommended by ASTM International), and it is established that delivering blow does not affect heave rate, which is the key parameter in successful characterization of frost susceptibility. As the freezing temperature decreases, the duration of supercooling of pore water shortens or is eliminated; i.e., thermal shock with a sufficiently low freezing temperature can minimize or possibly eliminate supercooling.

• 농업과학연구
• /
• 제42권4호
• /
• pp.313-318
• /
• 2015

In the year 2013, onions cultivation in Jeonnam province suffered by frost-pillar damage. To reveal the aspects of the cause and outbreak, we surveyed those damaged areas. Usually the frost-pillar damage occurred in February. But the outbreak aspect is so unforeseeable. In 2013, the damage was shown as 10.6% in onion fields including paddy fields, but no damage was noticed in 2014. The damage was noticed as 77.8% in paddy fields and 30.1% in upland. And, by the difference of the onion transplanting date, it occurred as 0.7% by the middle of November to the early of November, 22% by the middle of November and 69.0% by the early of December. If one performed the supplementary planting at $3^{rd}$ week of February, the highest survival percent was observed as 53.3%. If the date is early, another frost-pillar damage was occurred. If it's late, the damaged plant was perished with dry. In any case, we found improper transplanting caused the yield decrease. Therefore, we recommend the timely transplanting is the most important way for the prevention of frost-pillar damage in the onion cultivation.