• Title/Summary/Keyword: Frost density

Search Result 33, Processing Time 0.022 seconds

Thermal Conductivity Measurement of Saturated Clayey Mixtures using Oedometer Consolidation and Constant Rate of Strain Consolidation Tests (표준압밀시험 및 일정변형율 압밀시험 결과를 이용한 포화된 혼합 점성토의 열전도계수 측정에 관한 실험적 연구)

  • Kim, HakSeung;Kwon, HyungSeok;Lee, Jangguen;Cho, Nam Jun;Kim, Hyun-Ki
    • The Journal of Engineering Geology
    • /
    • v.22 no.3
    • /
    • pp.275-281
    • /
    • 2012
  • Thermal distribution in soils must be considered in engineering designs and constructions, including estimates of frost heave and thaw settlement, infrastructure in cold regions, and geothermal systems. Because thermal conductivity is a key parameter for evaluation of thermal distribution in soils, it must be accurately estimated. The thermal conductivity of fine-grained soils has been widely studied in recent years; however, few studies have reported a reliable method for experimental measurement. The present study presents the results of an experimental investigation of the thermal conductivity of a saturated kaolinite-silica mixture with respect to the variation of dry density. Thermal conductivities were measured in Constant Rate of Strain (CRS) consolidation tests, and the experimental data were analyzed to evaluate the accuracy of the new measurement system. In addition, we present an evaluation method for predicting thermal conductivity in fine-grained soils.

Evaluation of Cold Tolerance of Blueberry (Vaccinium corymbosum L.) and Diagnosis of Freezing Injury Using Timber Moisture Meter (블루베리의 내한성 평가 및 목재수분계측기를 이용한 동해피해 진단)

  • Kim, Ki-Deog;Lee, Jun-Gu;Ryu, Myeong-Sang;Yoo, Dong-Lim;Kwon, Young-Seok;Lee, Jong-Nam
    • Journal of Bio-Environment Control
    • /
    • v.21 no.4
    • /
    • pp.354-361
    • /
    • 2012
  • This study was conducted to evaluate on the freezing tolerance of introduced blueberry cultivars in Korea and to investigate availability of portable timber moisture meter for simple and rapid diagnosis of blueberry-shoot damage by freezing during wintering. Frost tolerance of blueberry cultivars showed big difference that rates of blueberry-shoot death were widely distributed from about 0% to 100% after wintering. Optical density in TTC reduction of blueberry twig treated low temperature was low in order of $-40^{\circ}C$ < $-21^{\circ}C$ < $4^{\circ}C$. Hardiness evaluation of visible injury in the cross-sectional surface color did not agree with that of rates of blueberry-shoot death during wintering. Lowest water content of blueberry stem measured by timber moisture tester during wintering was about 15%. During wintering, water contents of blueberry stems were higher at lower part of tree, but were low at end part of stems, and then when the blueberry grew again for spring, the water content gradually increased to 20~40%. Water content of blueberry stem with freezing injury during wintering decreased to under 5% by desiccation. Therefore it is assummed that the moisture content of blueberry stem injured by freezing during wintering was about under 14%, and it is expected that portable timber moisture meter could be available for rapid diagnosis of blueberry freezing injury in field.

Physical and Chemical Properties of Chlorine Bypass System-Dust from Cement Manufacturing (시멘트 생산 시 발생하는 Chlorine Bypass System-dust의 물리 및 화학적 특성)

  • Han, Min-Cheol;Lee, Dong-Joo
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.7 no.4
    • /
    • pp.310-315
    • /
    • 2019
  • This study conducted a series of studies to find alternative ways to use Chlorine Bypass System-dust(CBS-dust) in cement production. The results of engineering characteristics of CBS-dust are summarized as follows. First of all, the density of CBS-dust is 2.40, lighter than cement and the pH was 12.50 which was strong alkaline. In terms of particle size, it was 11.70 ㎛ which was finer than cement. With chemical properties, calcium oxide(CaO) was the highest as 35.10%, potassium oxide(K2O) was 32.43%, potassium chloride(KCl) was 19.46%, sulfur oxide(SO3) was 6.81%, and the remaining chemical components are SiO2, Fe2O3, Al2O3, MgO, and the like. Therefore, if CBS-dust is used as early-strength chemical admixtures in the concrete secondary products that use a large amount of mineral admixtures without rebar, it can be an effective method for increasing the strength of concrete as an alkali activator and preventing early-frost damage of Cold Weather Concrete.