• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2341-2348
• /
• 2010

In this paper, strain and stress on space frame are analyzed at racing car under crash loads. As the deformation is reduced to a minimum during crash and the vulnerable parts are grasped, the safety of driver is ensured. The vehicle frame is modelled with truss structure by inputting the material property of carbon steel on finite element analysis. The increase of impulse momentum is due to speed change at frontal collision. This influence effected on vehicle frame is also analyzed by ANSYS program. The deformation of the frame is studied by applying the crash loads at front, side and rear directions. Though the influence on the seat of driver is small at frontal and rear crash, the deformation due to impact is progressed into this seat. The safety of frame is enhanced by making up for these weak deformations and these results of simulation analysis can be applied to the production of the actual vehicle frame.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.235-240
• /
• 2015

Active Safety system is requested on the market of the medium and heavy duty commercial vehicle over 4.5ton beside the market of passenger car with advancement of the digital equipment proportionally. Unlike the passenger car, the mounting position of camera in case of the medium and heavy duty commercial vehicle is relatively high, it is disadvantaged conditions for lane recognition in contradiction to passenger car. In this work, we show the method of lane recognition through the Sobel edge, based on the spatial domain processing, Hough transform and color conversion correction. Also we suggest the low error method of front vehicles recognition in order to reduce the detection error through Haar-like, Adaboost, SVM and Template matching, etc., which are the object recognition methods by frontal camera vision. It is verified that the reliability over 98% on lane recognition is obtained through the vehicle test.

• Journal of Biomedical Engineering Research
• /
• v.32 no.4
• /
• pp.336-344
• /
• 2011

This article describes a new recognition algorithm using correlation coefficient for intelligent wheelchair to avoid collision for elderly or disabled people. The correlation coefficient can be used to represent the relationship of two different areas. The algorithm has three steps: Firstly, we extract an edge vector using the Histogram of Oriented Gradients(HOG) which includes gradient information and unique magnitude for each cell. From this result, the correlation coefficients are calculated between one cell and others. Secondly, correlation coefficients are used as the weighting factors for normalizing the HOG cell. And finally, these features are used to classify or detect variable and complicated shapes of two wheelers using Adaboost algorithm. In this paper, we propose a new feature vectors which is calculated by weighted cell unit to classify with multiple view-based shapes: frontal, rear and side views($60^{\circ}$, $90^{\circ}$ and mixed angle). Our experimental results show that two wheeler detection system based on a proposed approach leads to a higher detection accuracy than the method using traditional features in a similar detection time.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.233-250
• /
• 2013

Objectives The purpose of this study was to investigate the characteristics of inpatients who were admitted to Korean medicine hospital due to traffic accident. Methods 1,162 traffic accident patients who were admitted to department of Korean Rehabilitation Medicine of Cheonan Korean Medicine Hospital, Dae-Jeon University from 1st, January, 2011 to 31th, December, 2012 were analyzed according to the medical charts. Results 1. The average treatment result was 3.22 and in most (71.52%) of the patients, symptoms were more than improved. 2. In distribution according to age and sex, people in their 30s numbered the most both in male (12.65%) and female (14.72%). The 1,162 inpatients comprised of 457 (39.33%) male and 705 (60.67%) female. 3. 541 (46.56%) patients admitted in 2011 and 621 (53.44%) patients admitted in 2012. 4. 695 (59.81%) patients visited Cheonan Korean Medicine Hospital within 0~2 days after their traffic accident, followed by 242 (20.83%) patients who visited within 3~5 days after their traffic accident. Patients who admitted earlier showed more improvement in symptoms. 5. The average admission days were 9.32 days. Most (57.66%) patients discharged within 1 week. 6. 825 (71.00%) patients were driving sedan at the time of accident, followed by 105 (9.04%) SUV owners and 71 (6.11%) pedestrians. 7. Rear-end collision accident numbered the most (45.61%), followed by lateral collision (24.35%) and frontal collision (14.72%). 8. Most frequently prescribed examination was X-ray (95.52%), followed by CT (8.69%) and MRI (3.01%). 9. Most frequently given diagnosis was sprain (1,126 (96.90%) patients), followed by concussion & abrasion (178 (15.32%) patients) and fracture (109 (9.38%) patients). 10. Most frequently given Korean medicine treatment was acupuncture (1,162 (100%) patients), followed by anti-inflammatory pharmacopuncture (652 (56.11%) patients) and moxibustion (462 (39.76%) patients). 11. Most frequently given Korean medicine physiotherapy was infra-red (1,161 (99.91%) patients), followed by cupping therapy (1,152 (99.14%) patients) and hotpack (1,137 (97.85%) patients). 12. Most frequently prescribed herb medicine was huishou-san (13.51%), followed by dangguixu-san (12.65%) and yaojiao-tang G (7.06%) Conclusions In this study, people in their 30s, females, within 0~2 days since the accident took the highest percentage from each category of patients who admitted to Korean Medicine Hospital due to traffic accident. Patients who admitted earlier showed more improvement in symptoms and also discharged earlier.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.775-789
• /
• 2008

The Office for Government Policy Coordination announced in 2006, september that a scheme of pre-signal would show remarkable outcome to reduce traffic accidents. Therefore, the Ministry recommended applying preferentially the pre-signal scheme to enhancement projects for high accident frequency areas. In case that the suggested pre-signal was unilaterally introduced to the enhancement projects at intersections, it might rather cause a big trial and error in terms of traffic safety. Hence, on the basis of quantitative analysis, this study was to indicate a pre-signal's effectiveness to reduce the traffic accidents, to illustrate a trend of the accident type due to the pre-signal, and to introduce intersection type that could be appropriate for the pre-signal. The methodology adopted Comparison-Group Method which was developed by Hauer. Through this methodology, overall effectiveness to reduce the accidents is considered positive but individual effectiveness by intersection and by accident case was different. All cases of the accidents at small scale intersection demonstrated positive results to reduce its accidents, while in case of frontal collision and side-right angle collision out of the accident types, the installation of pre-signal rather caused a negative result increasing the accident in terms of the traffic safety. I hope that this study would be a useful reference for future development of the estimation of accident effectiveness. Thus, when the pre-signal is being installed in the big intersection, it is recommended operating the installation concerning carefully improvements about muliple aspects as traffic operation, traffic facility, human factor etc.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.20-26
• /
• 2018

It was a pilot study for developing an algorithm to determine the presence or absence of cervical spine injury by analyzing the severity factor of the patients in motor vehicle occupant accidents. From August 2012 to October 2016, we used the KIDAS database, called as Korean In-Depth Accident Study database, collected from three regional emergency centers. We analyzed the general characteristics with several factors. Moreover, cervical spine injury patients were divided into two groups: Group 1 for from Quebec Task Force (hereinafter 'QTF') grade 0 to 1, and group 2 for from QTF grade 2 to 4. The score was assigned according to the distribution ratio of cervical spine injured patients compared to the total injured patients, and the cut-off value was derived from the total score by summation of the assigned score of each factors. 987 patients (53.0%) had no cervical spine injuries and 874 patients (47.0%) had cervical spine injuries. QTF grade 2 was found in 171 patients (9.2%) with musculoskeletal pain, QTF grade 3 was found in 38 patients (2.0%) with spinal cord injuries, and QTF grade 4 was found in 119 patients (6.4%) with dislocation or fracture, respectively. We selected the statistically significant factors, which could be affected the cervical spine injury, like the collision direction, the seating position, the deformation extent, the vehicle type and the frontal airbag deployment. Total score, summation of the assigned each factors, 10 was presented as a cut-off value to determine the cervical spine injury. In this study, it was meaningful as a pilot study to develop algorithms by selecting limited influence factors and proposing cut-off value to determine cervical spine injury. However, since the number of data samples was too small, additional data collection and influencing factor analysis should be performed to develop a more delicate algorithm.