• 복식
• /
• 제34권
• /
• pp.169-182
• /
• 1997

Focusing on khotan located in the southern Silk Route which was one of the most important kingdoms in the Tarim Basin this study attempts to examine the changes of costume in Khotan by compar-ing the costumes in the painted panel showing the story of silk princess with the excavated costumes from ancient tombs. Furthermore this study attempts to inves-tigate the impacts of cultural exchange be-tween China and its western neighboring country Eastern and Western Turkestan on costume. Excavated costumes from the Shanpula ancient tomb in the region of Khotan and from ancient Niya in the esat-ern border of Khotan and discoveries from Rawak and Dandan-oilik near by Yotkan the ancient capital of Khotan are exam-ined. Basic Khotan's costume was the two piece style of tops and trousers. Over the basic costume wearing a top wear with half sleeves was popular. Skirt was worn by women. Even though there were many kinds tops were classified into the two types kaftan and tunic. Thouth Khotan maintained a association with China for a long time the style of Khotan costume had imbued to China. Top wear with half sleeves was worn frequently in Khotan. Also in China top wear with half sleeves was worn as over-wear which was called ban-xiu ban-bi bei-zi Costume style of China is covering the body profoundly and wrapping front edge toward the right. The types of chi-nese top wear with half sleeves for exam-ple round-neck·confronting front edge crossing-neck·confronting front edge tu-nic type discord with the traditional chi-nese costume style There were many cas-es that half sleeved top wear was worn as over wear in T'ang dynasty. The phenom-enon was due to the prevalence of 'ho' (foreign) and half sleeved top wear was introduced by the countries to the west of China Khotan. A round neck garment was a general type for the men of cuntries to the westof China. Also Chinese wore round neck garment since South and North Dynasty The type of Chinese round neck garment was not tunic but kaftan. From costume relics and ancient paintings the type of Khotan's round neck garment was tunic which was recorded on the Chinese histori-cal documents as " guan-tou-shan" that is tunic the type of persian costume, Even thgough the painted panel showing the sto-ry of silk princess was made in the it me when Turks was a dominion on Central Asia Khotan's costume style was not changed toward Turk's costume style and remained tunic style.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.482-492
• /
• 1998

With the purpose of developing a objective fitness evaluation system for knits, the basic bodice pattern for knit was drafted and the suitability of the altered pattern was evaluated. For each of nine different knits, six sleeveless shirts were made with patterns that were altered by different pattern alteration rate: 0%, 30%, 40%, 50%, 60%, or 70% of the stretch rate of the knit. The panel that was composed of 25 clothing specialists evaluated the fitness of the garments. The distance from the dress form landmark to the garment landmark was measured from each experimental garment. And the results of garment fitness evaluation and the measurement of distance from the dress form landmark to garment landmark were compared. The results of this study are as follows: There was high correlation(r$\geq$0.9) between the evaluation of the panel about the garment fit and the landmarks distance. The stretch rate of knits affected the evaluation of the garment fit. The stretch rate in course of knits affected on the garment fit at crosswise direction. The suitable pattern alteration rate was lower than 30% for the knits with high stretch rate in course. It was concluded that in order to get the appropriate knit bodice pattern length, the front bodice pattern must be less shorten than the back bodice pattern. The alteration rate at hip line must be lower than for waist or bust line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.48-51
• /
• 2000

플라즈마 디스플레이 패널의 발광효율을 개선하기 위하여 sustain 구간의 파형을 변화시킨 새로운 구동파 형을 제안하였다. 제안된 sustain 파형은 기존의 구형파에 기울기를 가진 ramp 형태의 파형을 덧붙여 줌으로써 Self-Erasing을 유도하는 파형이다. 기존에 제안된 Self-Erasing을 이용한 구동방식은 높은 구동주파수(>150kHz)에서만 발광효율이 개선되는 반면, 본 논문에서 제안하는 파형은 낮은 구동주파수(25kHz)에서도 30％정도의 발광효율이 개선되었다. 본 논문의 결과로부터 주파수, 듀티, 기울기 등의 다양한 구동조건에서의 연구가 진행된다면 더 큰 발광효율개선이 기대된다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.254-259
• /
• 1995

Large scale display panel(LSDP) is a main component in the next generation main control rooms. LSDP is located at the front of VDU-based operator's workstation and plays an important role in providing operators with overall information of plant status through mimic diagram, text/digit, graph, and so on. A critical matter determined at the first stage of LSDP design is how much information is displayed, because the information density of LSDP affects operator's performance. Many human factors guidelines recommend low information density of displays to avoid degrade of operator's performance, but doesn't provide a useful limit of information density. In this paper, we considered information density as the number of plant parameters and investigated the proper number of plant parameters through a human factors experiment. The experiment with 4 subjects was carried out and response time, error, and heart rate variation as criterion measures were recorded and analyzed. As the results, it is identified that the proper number of parameters in a LSDP is about thirty.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.383-391
• /
• 2015

Transparent type noise barrier is a desirable facility since it provides a secure view to drivers and passengers. However, reflection from this type of barrier could annoy dwellers on the sides of the road. To reduce reflection noise by transparent type barrier, modification can be made to the shapes on the front side and hence get effects by distortion of sound transmission. To achieve this, we have conducted simulation by which the effects of patterned screens of noise barrier on high-ways were investigated. The reduction effects of reflected sounds were evaluated for swelling, swelling with curved, rectangular and V-shaped screen type barriers, compared to the planar panel. The emitting noise was generated by 6-lane road and the patterned noise barriers had shown the reduction effects, especially in swelling and swelling with curved type for middle height dwellers, and the V-shaped screen type for higher elevation dweller. The swelling-type showed a decrease of 0.7~1.2 dB, performing the best diminution effect among the tested noise barriers.

• 소성∙가공
• /
• 제15권6호
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• The International Journal of Costume Culture
• /
• 제3권1호
• /
• pp.61-68
• /
• 2000

In recognition of the necessity to research on dresses of the past to lead future fashion, this study is focused on plastron basque that has constructed or decorated upper garments in various forms from the ancient times to modern times. Especially through reproduction and restoration of Victorian dress with plastron basque, the study approaches the problem in positive manner, As a result, studied 1887∼9 day dress is a plastron of pouched style with pleats panel in front center connected to jacket style bodice by buttons: and it shows changes into modern day dress form by constructing fitted line with decorative effects. By actually making the plastron that was only seen in picture, we expect this study will be a valuable resource for developing patterns, sewing and decoration techniques.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.333-338
• /
• 2011

This paper describes the design process of floor damping material optimization to reduce structure borne noise. This process uses finite element analysis(FEA) along with experimental techniques to complement each other. The objective of this approach was to develop an optimized damping material application layout and thickness at the initial design stage. The first step is to find the sensitivity areas of vehicle body without damping material applied using FEA. In order to determine the high vibration areas of the floor panel, the velocity was measured using a scanning laser vibrometer from 20 Hz to 300 Hz. To excite the floor panel vibration, shaker was placed at the front suspension attachment point. The second step is the optimization process to determine the light weight solution of damping material. The design guideline of damping material was suggested that the lightweight solution was verified using test result of road noise. Design engineer could efficiently decide the design variable of damping material using parameter analysis results in early design stage.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.129-134
• /
• 2012

We analyzed the movement and response time of charged particles according to particle-inserting methods to understand the variation of quantity of q/m of charged particles, which is a very important factor in electrical and optical characteristics of the charged particle type display, such as lifetime, response time, contrast ratio, reflectivity, etc. For our study we used white and black charged particles of which diameter is $20{\mu}m$, prepared pieces of ITO(indium tin oxide) coated glass substrate, and formed ribs on the glass substrates. The width of a rib is $30{\mu}m$ and the cell size is $220{\mu}m{\times}220{\mu}m$. As the particle-inserting methods, the white and black charged particles were respectively inserted into a front and a rear panel with a very small electric field and also the mixture of the white and black charged particles were inserted into a rear panel. As a result of the driving characteristics of charged particles, the factors about variation of quantity of q/m according to the particle inserting method was experimentally demonstrate, showing very different driving voltage, response time, the particle movement, etc.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5172-5177
• /
• 2011

본 논문은 박막 실리콘 태양전지에 적용되는 반사방지 또는 고반사 코팅 기술에 관한 연구이다. 태양광 흡수율을 개선하기 위하여 박막 실리콘 태양전지의 앞면에는 반사를 줄이는 반사방지막 기술이 필요하며, 뒷면에는 반대로 반사를 높이는 고반사 기술이 필요하다. 반사방지막 기술에서 단층의 구조에서는 코팅의 두께에 따라 반사율이 틀려지고, 적절한 범위에서 두께를 제어하면 낮은 반사율을 얻을 수 있다. 대칭형태의 다층의 구조에서는 단층구조에 비해서 넓은 파장대에 걸쳐서 낮은 반사율을 얻을 수 있다. 또한 뒷면에 적용되는 고반사막 기술에서는 높은 굴절율을 갖는 매질과 낮은 굴절율을 갖는 매질을 대칭 구조로 구성하여 계산한 결과 높은 반사율을 얻을 수 있다는 것을 확인하였다.