• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.211.2-211.2
• /
• 2015

In order to investigate the effect of front channel in DAL (dual active layer) TFT (thin film transistor), we successfully fabricated DAL TFT composed of ITZO and IGZO as active layer using the solution process. In this structure, ITZO and IGZO active layer were used as front and back channel, respectively. The front channel was changed from 0.05 to 0.2 M at fixed 0.3 M IGZO of back channel. When the mol concentration of front channel was increased, the threshold voltage (VTH) was increased from 2.0 to -11.9 V and off current also was increased from 10-12 to 10-11. This phenomenon is due to increasing the carrier concentration by increasing the volume of the front channel. The saturation mobility of DAL TFT with 0.05, 0.1, and 0.2 M ITZO were 0.45, 4.3, and $0.65cm2/V{\cdot}s$. Even though 0.2 M ITZO has higher carrier concentration than 0.05 and 0.1 M ITZO, the 0.1 M ITZO/0.3 M IGZO DAL TFT has the highest saturation mobility. This is due to channel defect such as pores and pin-holes. These defect sites were created during deposition process by solvent evaporation. Due to these defect sites, the 0.1 M ITZO/0.3 M IGZO DAL TFT shows the higher saturation mobility than that of DAL TFT with front channel of 0.2 M ITZO.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제31권12호
• /
• pp.1180-1187
• /
• 2007

In the present work, topology optimization method using adaptive inner-front level set method is presented. In the conventional level set based topology optimization method, there exists an incapability for inner-front creation during optimization process. In this regard, as a new attempt to avoid and to overcome the limitation, an inner-front creation algorithm is proposed. In the inner-front creation algorithm, the strain energy density of a structure along with volume constraint is considered. Especially, to facilitate the inner-front creation process during the optimization process, the inner-front creation map which corresponds to the discrete valued function of strain energy density is constructed. In the evolution of the level set function during the optimization process, the least-squares finite element method (LSFEM) is employed. As an application to shell structures, the lightweight design of doubly curved shell and segmented mirror is carried out.

• Journal of the Korean Home Economics Association
• /
• 제42권5호
• /
• pp.93-106
• /
• 2004

The purpose of this study is to make clear the indoor environmental efficiency and spatial function of the front balcony in apartments using responses from residents'. An interview survey carried out during the 14/sup th/∼24/sup th/ of January 2003, and a questionnaire survey was given during the 17/sup th/∼29/sup th/of January. Interviewees consisted of 31 residents living in renovated apartments, which had the front balcony added onto the living room. The respondents of the questionnaire survey consisted of 37 residents living in ordinary apartments with an existing front balcony. The residents living in ordinary apartments show relatively positive responses on the indoor thermal environment during winter, glare by daylight, and outdoor noise. The average heating charges of the renovated apartments came out to be more expensive than the ordinary apartments. In most renovated apartments, the living area converted from front balcony was used as the same functions ('space for drying the laundry', 'storage space', or 'space for cultivating of flower pots') of ordinary front balcony. From the results of this study, it is undesirable to renovate the front balcony as an addition to the livingroom.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.157-162
• /
• 2007

A new level set based topology optimization employing inner-front creation algorithm is presented. In the conventional level set based topology optimization, the optimum topology strongly depends on the initial level set distribution due to the incapability of inner-front creation during optimization process. In the present work, in this regard, an inner-front creation algorithm is proposed. in which the sizes. shapes. positions, and number of new inner-fronts during the optimization process can be globally and consistently identified by considering both the value of a given criterion for inner-front creation and the occupied volume (area) of material domain. To facilitate the inner-front creation process, the inner-front creation map which corresponds to the discrete valued criterion of inner-front creation is applied to the level set function. In order to regularize the design domain during the optimization process, the edge smoothing is carried out by solving the edge smoothing partial differential equation (PDE). Updating the level set function during the optimization process, in the present work, the least-squares finite element method (LSFEM) is employed. As demonstrative examples for the flexibility and usefulness of the proposed method. the level set based topology optimization considering lightweight design of 3D shell structure is carried out.

• Journal of the Ergonomics Society of Korea
• /
• 제13권1호
• /
• pp.15-25
• /
• 1994

Based on Fatal Accident Reporting System (FARS) data, safety belt effect- tiveness in preventing fatalities is investigated for the following five types of crashes: frontal, left, rear, right, and rollover. Passenger cars containing two occupants, a driver and a right front passenger, are included in this analysis. For each crash type, these cars containing the two occupants are classified into four categories according to the safety belt usage categories for the two front seat occupants, namely, both belted, both unbelted, and either one was belted but not both. Relative risks of driver and right front passenger fatalities are compared among these four cases. For each crash type, two independent estimates of safety belt effectiveness are obtained for drivers and for right front passengers. The weighted average of the two estimates is calculated for drivers and for right front passengers for the five crash types. Using FARS data starting 1978 throught 1983, safety belts are more effective in rollover accidents than in frontal collisions. In rollover accidents, safety belt effectiveness estimate for drivers is $68%{\pm} 6% $ and that for right front passengers is $71%{\pm}6% $ , in which the error limits indicate one standard error. Sfety belt effectiveness estimates for drivers and right front passengers involved in frontal collisions are $41%{\pm} 9% $ and $37%{\pm} 10% $ , respectively. For left and right sided collisions and for both drivers and right-front-passengers, none of the four estimates are significantly different from 0%, statistically : however, when left and right sided collisions are combined with far sided occupants(drivers involved in right sided collisions and right front passengers involved in left sided collisions) safety belt effectiveness is significant, $38%{\pm} 12% $ . For rear collisions, the estimate for drivers shows statistically significant positive effect, $60%{\pm}23% $ . while for right-front-passengers the estimate is not significantly different from 0%. These results show that a safety belt is an effective restraint system not only in frontal crashes but also in a variety of crashes.

• Korean Institute of Interior Design Journal
• /
• 제26권4호
• /
• pp.84-92
• /
• 2017

Just as the front gate is located at the meeting point between the house and the street, the Subject and the Other face each other the same way. This study examines the relationship between House(subject) and Stree (other) at the boundary of the Front Gate-Face. Pursuing the aspects of the changing Front Gate-Face accordingly to the attitude of the Subject facing the Other, this study tries to analyze the possibilities and significance of the hospitality Front Gate-Face with the ethical point of view of Levinas. As architectural instance, results of examining the Front Gate-Face of traditional houses in Korea, China and Japan are as follows. Front Gate-Face of China is characterized by self-centered introversion to interact with the external world (the other). Front Gate-Face of Japan is characterized by a humble submission to the group. Front Gate-Face of Korea shows however more flexible relationship orientations in terms of hospitality, compared to Japan or China. When looking through hospitality factors, accordingly to the above mentioned Korean hospitality characteristics, the possibilities seem not be exclusively bordered inside the conceptual category perimeter suggested by Levinas' concept of hospitality. It is almost impossible for the nowadays ever-strong privacy culture to not allow room for the architectural structure of an absolute hospitality toward others. However, this impossibility not being absolute, still yields a space for a significant possibility to explore.

• Phonetics and Speech Sciences
• /
• 제5권4호
• /
• pp.99-107
• /
• 2013

The purpose of this study is to examine the relative distances among English front vowels in a message produced by 47 Korean and American speakers in order to better instruct pronunciation skills of English vowels for Korean English learners. A Praat script was developed to collect the first and second formant values(F1 and F2) of eight words in each sound file which was recorded from an internet speech archive. Then, the Euclidean distances were measured between the three vowel pairs: [i-ɛ], [i-ɪ], and [ɛ-æ]. The first vowel pair [i-ɛ] was set as the reference from which the relative distances of the other two vowel pairs were measured in percent in order to compare the vowel sounds among speakers of different vocal tract lengths. Results show that F1 values of the front vowels produced by the Korean and American speakers increased from the high front vowel to the low front vowel wih differences among the groups. The Korean speakers generally produced the front vowels with smaller jaw openings than the American speakers did. Secondly, the relative distance of the high front vowel pair [i-ɪ] showed a significant difference between the Korean and American speakers while that of the low front vowel pair [ɛ-æ] showed a non-significant difference. Finally, the Korean speakers in the higher proficiency level produced front vowels with higher F1 values than those in the lower proficiency level. The author concluded that Korean speakers should produce the front high vowels distinctively by securing sufficient relative distance of the formant values. Further studies would be desirable to examine how strong the Korean speakers' English proficiency correlate with the relative distance of target words of comparable productions.

• The Research Journal of the Costume Culture
• /
• 제28권3호
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제51권12호
• /
• pp.66-71
• /
• 2014

This paper presents an analog front-end integrated circuit (IC) for medical ultrasound imaging systems using standard $0.18-{\mu}m$ CMOS process. The proposed front-end circuit includes the transmit part which consists of 15-V high-voltage pulser operating at 2.6 MHz, and the receive part which consists of switch and a low-power low-noise preamplifier. Depending on the operation mode, the output driver in the transmit pulser can be reconfigured as the switch in the receive path and thus the area of the overall front-end IC is reduced by over 70% in comparison to previous work. The designed single-channel front-end prototype consumes less than $0.045mm^2$ of core area and can be utilized as a key building block in highly-integrated multi-array ultrasound medical imaging systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제15권6호
• /
• pp.1201-1208
• /
• 2020

A mass of seawater with similar properties in the ocean is called a water mass, and the front is a sea area where two masses of different properties meet. The gradient algorithm is a method of extracting where the sea water temperature pixel changes rapidly assuming that the slope is large, and the place with the large slope is assumed to be a front. This method is able to process large amounts of satellite data at once. Therefore, in this study, we tried to find the front lines in the sea area around the Korean Peninsula by using a gradient algorithm. The study data used gridded sea surface temperature satellite data. The resolution was 1/4°, and the monthly average data from January 1993 to December 2018 were used. There were major five fronts representatively, China Coastal Front, South Sea Coastal Front, Kuroshio Front/ Kuroshio Extension Front, Subpolar Front and the Subarctic Front. As a result of comparing the distribution of front by season, more types of front were distributed in winter and spring than in summer and autumn, and the distribution range was wider.