• 한국지반공학회논문집
• /
• 제35권8호
• /
• pp.31-42
• /
• 2019

최근에 시공된 건축현장의 73개 설계 자료를 분석하여 매입 PHC말뚝에 대한 설계 현황을 고찰하였다. 매입 PHC말뚝의 설계에서 사용하고 있는 극한지지력 산정공식에 따라 산정한 전체지지력에 대한 주면마찰력의 분담율(SRF)는 20~53%로 나타났다. 극한주면마찰력이 과소평가되는 지지력 산정공식에 대한 개선이 필요한 것으로 판단되었다. PHC말뚝의 재료 성능에 대한 평균 설계 효율은 약 70%이었으며 지반 지지력에 대한 평균 설계 효율은 약 80%이었다. 즉, 지반의 설계 효율은 PHC말뚝의 설계 효율보다 약간 높은 수준으로 나타나고 있었다. 이는 지반 지지력을 설계하중보다 동등한 수준 또는 그것보다 약간 높은 수준으로 계산하고 있는 설계 현황에 기인한 것으로 판단되었다. 지반의 허용지지력을 PHC말뚝의 허용연직압축하중보다 높은 수준으로 산정하여야 할 것으로 판단되었다. 매입 PHC말뚝의 지지력 산정공식에서는 극한주면마찰력이 극한선단지지력보다 상대적으로 2.2배 정도 낮은 수준으로 계산되었다. 매입 PHC말뚝의 설계에서 적용하고 있는 극한지지력 산정공식들은 모두 국외 지반을 대상으로 개발되었으며 국내 지반에 대한 적용성 검증 없이 도입되어 사용되어 오고 있었다. 매입 PHC말뚝의 설계에서 적용할 지지력 산정공식의 개선이 이루어져야 할 것으로 판단되었다.

• 대한토목학회논문집
• /
• 제41권5호
• /
• pp.523-531
• /
• 2021

일반적으로 기초는 여러 개의 단일말뚝이 상부 구조체에 의해 연결된 상태로 군말뚝을 의미한다. 하지만, 군말뚝에 상부 하중 재하 시 지반에 작용하는 응력 범위는 단일말뚝에 비해 더 넓은 폭과 깊이로 확장되고, 중복되기 때문에 전체적인 지지력은 감소할 수 있다. 이러한 지지력 감소비를 군말뚝 효율이라 하나 일반적인 말뚝과 지반의 접촉 조건에 따른 영향을 분석한 연구는 부족한 실정이다. 따라서 본 연구에서는 지반 구성 및 군말뚝의 배치, 간격, 지반과 말뚝간의 접촉 특성을 해석 변수로 설정하고, 군말뚝 효율 및 군말뚝을 구성하는 개별말뚝의 거동을 분석하였다. 해석 결과, 지반 종류에 따라 마찰계수 증가 시 군말뚝 효율은 수렴 또는 감소하는 경향을 보였으며, 이를 통해 최적 군말뚝 효율을 분석하였다. 또한, 개별말뚝 분석을 통한 하중 감소비 파악 결과, 군말뚝 내부에 위치한 말뚝의 경우 하중을 상대적으로 적게 받았으며, 이는 내부 지반에 대한 영향인 것으로 판단된다.

• 한국대기환경학회지
• /
• 제16권6호
• /
• pp.633-640
• /
• 2000

The effects of structure modification of the vortex finder on the collection efficiency and pressure drop have been investigated. The pressure drop in a cyclone having the two stage vortex finder is higher than that in a conventional cyclone and increases proportionally with the increase of square of gas inlet velocity in both cases. The pressure drop of both conventional cyclone of friction resistance at the boundary layer. The collection efficiency of fine dust has been enhanced by addition of vortex finder in a conventional cyclone and gas inlet velocity showing maximum dust removal efficiency increase to 17 m/s(1.7 times of saltation velocity). Optimum size of two stage vortex finder has been induced to 13 cm I.D$\times$2.6cm Length from the results of overall dust collection efficiency. Previous models were tested for the simulation of collection efficiency of cyclone having two stage vortex finder and the Dietz model predict the similar value with experimental results of the present study.

• Computers and Concrete
• /
• 제8권6호
• /
• pp.693-715
• /
• 2011

The main object of this study is to evaluate the seismic response effects on a reinforced concrete building isolated by triple concave friction pendulum (TCFP) bearings. The site-response effects arise from the difference in the local soil conditions at the support points of the buildings. The local soil conditions are, therefore, considered as soft, medium and firm; separately. The results on the responses of the isolated building are compared with those of the non-isolated. The building model used in the time history analysis, which is a two-dimensional and eight-storey reinforced concrete building with and without the seismic isolation bearings and/or the local soil conditions, is composed of two-dimensional moment resisting frames for superstructure and of plane elements featuring plane-stress for substructure. The TCFP bearings for isolating the building are modelled as of a series arrangement of the three single concave friction pendulum (SCFP) bearings. In order to investigate the efficiency of both the seismic isolation bearings and the site-response effects on the buildings, the time history analyses are elaborately conducted. It is noted that the site-response effects are important for the isolated building constructed on soft, medium or firm type local foundation soil. The results of the analysis demonstrate that the site-response has significant effects on the response values of the structure-seismic isolation-foundation soil system.

• Journal of Biosystems Engineering
• /
• 제33권1호
• /
• pp.14-20
• /
• 2008

An agricultural unmanned helicopter was suggested for an alternative to current pesticide application methods to solve such problems as high cost, low efficiency, shirking task and unsafe work. To pursuit this trend, researches on the development of unmanned helicopters have been accelerated in Korea as well. In this research, a guide type centrifugal clutch that plays an important role in the unmanned helicopter was studied. Theoretical analyses and experimental tests were conducted for designing an optimal clutches. Main design factors of the guide type centrifugal clutch were found to be spring constant, free length of spring, mass of friction sector, contact area, allowable pressure, number of friction sector, friction coefficient, radius of drum, and clutch arrangement. And these design factors could be the functions of engaging engine speed and desired power transfer capacity. The result of the single clutch test showed the power transfer capacity of 14.1 PS at 5,800 rpm and the result of the dual clutch test showed that the capacity of 17.7 PS at 5,600 rpm. These experimental results agreed well the theoretical simulations.

• 한국해양공학회지
• /
• 제7권2호
• /
• pp.121-130
• /
• 1993

A study off riction welding of high speed steel(SKH 51) bar for blade side to carbon steel(STC 3)bar for shank side was carried out experimentally through tensile test, hardness test, microstructure, and acoustic emission (AE) test. So, this paper deals with optimizing the welding conditions and the real-time quality (strength) evaluation of friction weleded joints by acoustic emission technique. The results obtained are summarized as follows: (1) For friction welded joints of SKH 51to STC 3 steel bars, the total upset (U) increases linearly with an increase of heating time (t sub(1)). (2) The determined optimum welding conditions are heating time (t sub(1)) 7-9 sec, upsetting time (t sub(2)) 5 sec, heating pressure(P sub(1)) 12 kg sub(f)mm supper(2), upsetting pressure (P sub(2)) 15 kg sub(f) mm supper(2) and rotating speed (n) 2, 000 rpm, resulting in a computed relationship between the tensile strength of the joint .sigma. (kg sub(f) mm supper(2)) and the heating time t sub(1) (sec) as the following. sigma.=2.39t sub(1)

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1340-1347
• /
• 2002

Finite element simulations are being widely used to increase the efficiency and effectiveness of design of bulk metal forming processes. In such simulations, proper consideration of friction condition is crucial in obtaining reliable results. For this purpose, tip test based on backward extrusion was proposed recently. In this lest, a cylindrical billet is positioned in a shallow groove of a counter punch for centering purpose and formation of a radial tip is induced on the extruded end of the workpiece. In this study, the effect of centering groove on tip test was investigated. The quantitative ratio of the shear friction factors between the punch and die was numerically determined depending on the shape of centering groove. Also, surface expansion and pressure distribution along the punch and die were considered in order to better understand the reason that friction condition at the punch compared to the one of die was more severe.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.65-71
• /
• 2002

Friction welding has may merits such as energy efficiency, simple processing, etc. but it is difficult to obtain good welding at the welded interfaces and heat affected zone. It is discovered that stress singularity exists at the interferes and heat affected zone. The computer program based on boundary element method is utilized in this study. A mathematical model is implemented based on results from several experiments performed at and around the welded interfaces and heat affected zone of disimilar metals under static and dynamic loadings. This stay is to investigate the characteristics of the deformation and fracture behavior around interfaces for friction welded materials under static tensile load. Also, the stress distribution at the tip of crack is analyzed by using BU based on Kelvin's solution of 2-dimensional binding zone. The results of BEM are identical with those in case of considering interfaces of both heat affected zone. Also, stress singularity at the tip of interfaces appears when the elastic modulus ratio is 1.07.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.358-365
• /
• 2006

The hydraulic pump of an Electro-hydrostatic Actuator should be able to quickly feed large volume of oil into hydraulic cylinder in order to reduce the response time. On the other hand, it should be also able to precisely dispense small amount of oil through low-speed operation so that the steady state position control error of the actuator can be accurately compensated. Within the scope of axial piston type hydraulic pumps, this paper is focused on the investigation how the surface treatment of their cylinder barrel with TiN plasma coating can contribute to the reduction of the friction and wear rate of valve plate in the low-speed range with mixed lubrication. The results showed that the friction torque of the valve plate mated with a TiN coated cylinder barrel could be reduced to 22% of that with an uncoated original one when load pressure was 300 bar and rotational speed 100 rpm. It means that the torque efficiency of the test pump was expected to increase more than 1.3% under the same working condition. At the same time, the wear rate of the valve plate could be reduced to $40\sim50%$.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.8-15
• /
• 2016

Most machines lose a lot of energy due to friction. Wear due to friction also reduces performance. Therefore, it is important to reduce friction on the surface to improve energy efficiency and decrease wear. Surface texturing refers to making patterns on the surface for reducing friction. There are many surface texturing methods, such as using lasers, abrasive jet machining, and so on. Recently, mechanical manufacturing methods, such as cutting and grinding, have been highlighted. Among them, the grinding method has the advantage of making patterns in large areas quickly. Therefore, it is appropriate for surface texturing on large machines. This paper is a study on the slope change of the surface texturing pattern using grinding. Therefore, we researched the slopes of the patterns corresponding to "spindle speed and feed rate" and "curvature of workpiece surface" using a mathematical model and experiment. As a result, we made a proper mathematical model concerning our research. Therefore, using the mathematical model in this paper, we could predict the slope change of the pattern according to grinding conditions.