• 한국안전학회지
• /
• 제25권3호
• /
• pp.66-70
• /
• 2010

This paper analyzes difference between current tunnel ventilation calculation method and advanced one which considers effects of polluted air recirculation near tunnel portals. For the calculation, CFD(Computational fluid dynamics) technique was utilized. From the result, it was found that 4.38% more fresh air is required when there is polluted air recirculation near tunnel portal areas. Hence, it is recommanded that the consideration of polluted air recirculation should be made when deciding the ventilation requirements for tunnel.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.321-332
• /
• 2001

In this study, a design program for ventilation requirements of a longitudinal raod tunnel were developed and investigated. The control volume method was applied to calculate the local air velocity and the local concentration distribution of pollutants, CO, $NO_x$, soot along the tunnel for various tunnel ventilation system. This program was validated by comparing with the practical design data for the road tunnel ventilation system. The calculation results were in good agreement with the practical design data.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.277-284
• /
• 2013

In this paper, the ventilating and heating system of T-103 trainer aircraft were investigated and redesigned to improve its poor performance. The ventilation system of the trainer was designed to increase the mass flow rate of fresh air by using air intake valves. The flow-in air through the air intake valve is supplied to the cabin by the ram effect of aircraft and the propeller. And the additional heating system was installed to improve the temperature of the cabin inside. The wasted heat from the exhaust gas of the engines was used as heat source of the additional heating system by installing an heat exchanger around the exhaust nozzle. The additional fresh air and the heated air enter the cabin via two ducts mounted under the instrument panel and behind the pedal in the cabin. The additional ventilating and heating system can be controlled by the first pilot and the secondary pilot individually using the control knob equipped separately. After mounting the additional ventilating and heating system, evaluations such as inspection of parts and component, ground run-up test, in-flight test, user test, etc. were conducted. The result of the tests was sufficient to meet the requirements of the manuals, and the pilots were satisfied with the additionally mounted systems.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.127-129
• /
• 2011

빌딩에서 쾌적한 환경을 유지하기 위해 온도제어가 필요하다. 온도를 제어하기 위해서 적정 온도를 유지시켜주는 매체인 상변화물질을 이용할 수 있다. 상변화물질은 고유의 상변화온도가 있고 상변화물질은 열을 얻고/방출할 때 녹거나/굳게 된다. 이러한 장점이 있으므로 상변화물질은 공기-상변화물질 열교환기에 적용할 수 있다. 본 연구에서는 시스템 성능에 만족하도록 공기-상변화물질 열교환기를 설계하였고 열교환기의 성능을 연구하기 위해서 실험을 수행한다.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.995-1002
• /
• 2012

In a refrigerator, many food boxes are stored, so the flow of chilly air has very complicate stream paths inside the room of a refrigerator. Moreover, on some occasions, there is no flow of chilly air in a space due to blocking flow paths by food boxes, which is an important issue to be settled for improving the ability of food storage with fresh states. One of methods to solve this problem is to redesign the flow-pattern of chilly air to be uniform flow inside room, if possible. In this work, we have tried to design the duct-structure for the uniform flow of a chilly air using a FE-analysis method. And we conducted real commercial tests using a refrigerator having the redesigned duct. The results showed that good agreements with general requirements.

• Journal of Forest and Environmental Science
• /
• 제36권4호
• /
• pp.267-273
• /
• 2020

Diospyros mespiliformis is a highly valued and threatened tree species within the Sahelo-Sudanian zone of Africa, but its seed germination requirements under cultivation are not well researched. In a first experiment which aimed at determining germination response of seeds to dehydration, fresh seeds were dried at room temperature for 26 days during which their moisture content, their germinability, and their viability were monitored at two-day intervals. In the second experiment, 14 pre-germination treatments were tested for their effect on the germination of dried seeds. Results showed that fresh seeds had 52.7% moisture and achieved 97.7% germination. As seeds were dried, percentage germination gradually decreased with decreasing moisture content and reached 0% when moisture content had dropped to 18%. Meanwhile, seed viability remained at 100% over drying duration. Seeds that were not germinated after air dry also recorded 100% viability. The most effective treatment for inducing germination of dried seeds was scarification using 98% sulfuric acid for 30 min which resulted in 96.6% germination. This study reports for the first time in D. mespiliformis seeds a desiccation-induced dormancy which can be efficiently alleviated by acid scarification. This study provides useful information that will contribute to efficient management of D. mespiliformis seed resources for propagation.

• Advances in concrete construction
• /
• 제5권1호
• /
• pp.1-15
• /
• 2017

This research project aimed at evaluating experimentally the effect of natural perlite powder as an alternative supplementary cementing material (SCM) on the performance of fiber reinforced self-consolidating repair mortars (FR-SCRMs). For this purpose, four FR-SCRMs mixes incorporating 0%, 10%, 20%, and 30% of natural perlite powder as cement replacements were prepared. The evaluation was based on fresh (slump flow, flow time, and unit weight), hardened (air-dry unit weight, compressive and flexural strengths, dynamic modulus of elasticity), and durability (water absorption test) performances. The results reveal that structural repair mortars confronting the performance requirements of class R4 materials (European Standard EN 1504-3) could be designed using 10%, 20%, and 30% of perlite powder as cement substitutions. Bonding results between repair mortars containing perlite powder and old concrete substrate investigated by the slant shear test showed good interlocking justifying the effectiveness of these produced mortars.

• Agricultural and Biosystems Engineering
• /
• 제4권2호
• /
• pp.58-65
• /
• 2003

An understanding of the cooling requirements of horticultural commodities begins with adequate knowledge of their biological responses. All fresh horticultural products are living organisms, carrying on the many biological processes that are essential to the maintenance of life. The pre-cooling is essential technique for the construction of cold chain system, which is necessary to maintain marketing quality of fresh produces during the transportation and distribution. The purpose of this study is to develop the pressure cooling tunnel using conveyer for the reduction of labor and improvement of pre-cooling efficiency. Performance of developed facility was tested for the strawberries, tomatoes and Chinese cabbages. Cooling ratio as a result of pre-cooling efficiency was 1.57, 1.56 and 1.32 for strawberries, tomatoes, and Chinese cabbages respectively. Cooling ratio decreased with increasing the distance of heat conduction from surface to center. The cooling ratio of Chinese cabbages was lower than that of fruit because of its head and leaf. In aspect of cooling uniformity, there was no significant difference of final temperature among inlet, outlet and middle layers of cold air in fresh produces. After pre-cooling treatment, quality changes were measured for the weight loss, Vit. C content, and titratable acidity. The quality of pre-cooling treatment was better than that of non-treatment and was kept on well during long-term storage.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.1-4
• /
• 2004

In this paper. applicability of high early strength type AE water reducing agent(HESAEWA) developed by the authors is discussed by applying Mock-up test. For fresh concrete properties, concrete using existing AE water reducing agent(EAEWRA) and HESAEW A meets the target slump and air content at jobsite. Setting time of concrete using HESAEWA is shorter than that using EAEWRA. Remarkable variance of bleeding and settlement is not observed with type of AE water reducing agent. For hardened concrete properties, use of HESAEW A results in higher strength development compared with that of EAEWRA at standard curing and in field curing condition. Reaching time to accomplish 5MPa of compressive strength. which is possible to remove side form. is taken using HESAEWA earlier than that of EAEWRA by 1day. Therefore, it is confirmed that use of HESAEWA can meet the requirements of general quality of concrete and achieve high early strength development as well as has a desirable field applicability.

• 한국건축시공학회지
• /
• 제18권3호
• /
• pp.211-218
• /
• 2018

이 연구에서는 국내산 인공 경량골재를 사용한 콘크리트의 실험결과를 바탕으로 콘크리트 표준시방서의 관련내용에 대한 합리성 및 개정의 필요성을 평가하였다. 국내 표준시방서의 내용은 ACI 211.2, ACI 213, ACI 301, JASS 5 및 CEB-FIP 시방내용들과 비교하였다. 국내산 인공 경량 잔골재의 연속적 입도분포를 위해서는 최대직경 2.5mm 이하의 천연모래 혼입이 요구되었다. 경량골재 콘크리트의 재료분리 및 과도한 블리딩을 제어하기 위해서는 현재 시방서에서 제시된 최대 물-결합재비와 단위수량에 대한 수정이 요구되었다. 특히, 배합 목표성능인 초기 슬럼프, 28일 압축강도, 공기량 및 기건 단위용적중량에 대해 경량골재 콘크리트의 합리적인 배합설계 절차의 확립이 요구되었다. 결과적으로 콘크리트 표준시방서는 국내산 인공 경량골재의 특성을 고려하여 전반적이 개정이 요구되었다.