• 제목/요약/키워드: Frequency-tension curve

검색결과 11건 처리시간 0.018초

쥐의 좌심방에서 세포막을 통한 $Ca^{2+}\;Flux$에 영향을 주는 약물이 자극빈도-장력 곡선에 미치는 영향 (The Influence of Several Drugs Affecting $Ca^{2+}$ Influx on Frequency-tension Curve of Rat Left Atrium)

  • 김찬윤;안석균;서창국;강두희
    • The Korean Journal of Physiology
    • /
    • 제23권2호
    • /
    • pp.329-337
    • /
    • 1989
  • Cardiac muscles show stimulation frequency-dependent tension changes i.e. Bowditch phenomenon and Woodworth phenomenon, the former is an increase of tension with the increase of stimulation frequency, whereas the latter is an increase of tension with a decrease of stimulation frequency. Bowditch phenomenon is seen in the range of frequency 1.0 cps and above, and Woodworth phenomenon below the frequency 1.0 cps in the most of mammalian cardiac atrium. To throw some light on the possible mechanism of both phenomena in rat atrium, influences of drugs affecting $Ca^{2+}$ influx through the plasma membrane $(verapamil,\;La^{3+},\;norepinephrine)$ and $Ca^{2+}$ release from sarcoplasmic reticulum (SR) on frequency-tension curve were studied. The results obtained are summarized as follows: 1) At low temperature $(27.5^{\circ}C)$, both Bowditch and Woodworth phenomenon were demonstrated. But Bowditch phenomenon disappeared at the temperature above $(32.5^{\circ}C)$. 2) At $(27.5^{\circ}C)$, in the presence of verapamil, a $Ca^{2+}$ channel blocker, a time course of change in the frequency-tension was studied. It was found that Bowditch phenomenon was affected before the Woodworth phenomenon, then the former was completely disappeared. At $(32.5^{\circ}C)$, where no Bow-ditch is seen in normal atrial muscle, Bowditch phenomenon was reappeared by an administration of norepinephrine suggesting again that slow inward current of such as $Ca^{2+}$ channel is closely related to Bowditch phenomenon. 3) At $27.5^{\circ}C$, in the presence of $La^{3+}$, although tensions were decreased at all stimulation frequencies, Bowditch and Woodworth phenomenon were still demonstrated. However in the presence of both $La^{3+}$ and verapamil, Bowditch phenomena was disappeared suggesting that $La^{3+}$ is less effective in blocking $Ca^{2+}$ channel than verapamil. 4) At $27.5^{\circ}C$, in the presence of ryanodine, an inhibitor of calcium release from SR, Woodworth phenomenon was disappeared, which was consistent with previous reports of others, suggesting that $Ca^{2+}$ release from SR is closely related to Woodworth phenomenon. From the above findings, it may be concluded that Bowditch phenomenon is dependent on the magnitude of $Ca^{2+}$ influx through slow channel and Woodworth phenomenon is dependent on the amount of $Ca^{2+}$ stored in SR.

  • PDF

바이올린 브릿지의 음향적 특성 및 SDM 시뮬레이션에 관한 연구 (Studies on the Acoustical Characteristics of Violin Bridges and SDM Simulation)

  • 정우양
    • 한국가구학회지
    • /
    • 제12권1호
    • /
    • pp.47-55
    • /
    • 2001
  • Violin bridge blank cut from maple wood with good quality has typical pattern of the radial direction in the side edge with minimal dispersion. This experimental study was designed and carried out to examine the effect of the physical and macroscopical characteristics on the compressive creep of violin bridge blank which had been imported from European manufacturer. This research arose from the idea that the maple solid wood with heterogeneous wood density and ray direction in the side edge would have uneven rheological property of violin bridge blank which is supposed to be pressed by the tension of strings. Experimentally, the compressive creep of bridge blank became smaller with the higher density of imported maple wood and showed clear density-dependence for the duration of load under the string tension of 5 kgf. Every bridge blank showed the behavior of primary creep stage(stress stabilization) having logarithmic regression creep curve with high correlation coefficient under the designed stress level. Even though the relationship between compressive creep and ray direction on the side edge of bridge was not so clear contrary to expectation, we could conclude that wood density and ray direction should be the quality decisive factors affecting the acoustical characteristics and performance of the bridge, the core member of violin-family bow instruments.

  • PDF

칼슘, 베라파밀, 란타눔이 흰쥐 자궁근의 자발적 수축과 칼륨 경축에 미치는 효과 (Effects of $Ca^{++}$, Verapamil and $La^{+++}$ on the Spontaneous Contraction and K-contracture in the Isolated Rat Uterine Smooth Muscle)

  • 황상익
    • The Korean Journal of Physiology
    • /
    • 제18권1호
    • /
    • pp.37-50
    • /
    • 1984
  • The effects of $Ca^{++}$ and its antagonists (verapamil and $La^{+++}$) upon the spontaneous contraction and the contracture induced by 60 mM K-Tyrode solution were studied in the isolated uterine muscle. Longitudinal muscle strips were prepared from the rat uteri at estrous stage. All experiments were performed in tris-buffered Tyrode solution which was aerated with 100% $O_2$ and kept at 35^{\circ}$. The results obtained were as follows: 1) In the uterine strips contracting spontaneously, both the amplitude of peak tension and the area of contraction curve increased dose-dependently in the range of $0.5${\sim}8$ mM $Ca^{++}$. The frequency of contraction increased as the concentration of $Ca^{++}$ increased up to 2 mM, but above this concentration the frequency decreased. In $Ca^{++}-free$ media, however, contraction did not develop. In the contracture induced by 60 mM K-Tyrode solution, the developed tension increased dose-dependently as the concentration of external $Ca^{++}$ increased to 8 mM. In the absence of external $Ca^{++}$ K-contracture appeared, but it was not sustained. 2) The spontaneous contraction of rat uterus was suppressed by verapamil in proportion to an increase of its concentration and totally abolished at the concentration of $3{\times}10^{-4}\;g/l$, but the spontaneous contraction re-appeared by addition of $Ca^{++}$. The amplitude of peak tension recovered completely but the recovery of frequency was incomplete. K-contracture decreased in a dose-dependent manner after the treatment with verapamil and totally disappeared at its concentration of $3{\times}10^{-4}\;g/l$. Even in this case contracture developed again by extra $Ca^{++}$. 3) The spontaneous contractile activity was inhibited by $La^{+++}$. At the concentration of $10^{-4}$M $La^{+++}$, fibrillation appeared. In the strip inhibited by $10^{-5}M\;La^{+++}$, contractility recovered completely by extra $Ca^{++}$ while in the $10^{-4}M\;La^{+++}$ treated preparation, the rhythmic spontaneous contraction did not develop even at the concentration of 16 mM $Ca^{++}$. After the initial transient depression of contracture tension by $10^{-3}M$ of $La^{+++}$, the strip stowed considerably large size of contracture, hardly influenced by external $Ca^{++}$ or verapamil. The results obtained in this experiment suggest that in the rat uterine muscle there would be some competitive actions between $Ca^{++}$ and its antagonists. It is speculated that $Ca^{++}$ plays an important role in the conduction of excitation, and $La^{+++}$ influences upon cellular $Ca^{++}$ mobilization and re-uptake process as well as transmembrane $Ca^{++}$ transport in a K-depolarized state.

  • PDF

Frequency domain analysis of Froude-Krylov and diffraction forces on TLP

  • Malayjerdi, Ebrahim;Tabeshpour, Mohammad Reza
    • Ocean Systems Engineering
    • /
    • 제6권3호
    • /
    • pp.233-244
    • /
    • 2016
  • Tension Leg Platform (TLP) is a floating structure that consists of four columns with large diameter. The diffraction theory is used to calculate the wave force of floating structures with large dimensions (TLP). In this study, the diffraction and Froude-Krylov wave forces of TLP for surge, sway and heave motions and wave force moment for roll, pitch degrees of freedom in different wave periods and three wave approach angles have been investigated. From the numerical results, it can be concluded that the wave force for different wave approach angle is different. There are some humps and hollows in the curve of wave forces and moment in different wave periods (different wavelengths). When wave incidents with angle 0 degree, the moment of diffraction force for pitch in high wave periods (low frequencies) is dominant. The diffraction force for heave in low wave periods (high wave frequencies) is dominant. The phase difference between Froude-Krylov and diffraction forces is important to obtain total wave force.

Electrophysiological and Mechanical Characteristics in Human Ileal Motility: Recordings of Slow Waves Conductions and Contractions, In vitro

  • Ryoo, Seung-Bum;Oh, Heung-Kwon;Moon, Sang Hui;Choe, Eun Kyung;Yu, Sung A;Park, Sung-Hye;Park, Kyu Joo
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제19권6호
    • /
    • pp.533-542
    • /
    • 2015
  • Little human tissue data are available for slow waves and migrating motor complexes, which are the main components of small bowel motility. We investigated the electrophysiological and mechanical characteristics of human ileal motility, in vitro. Ileum was obtained from patients undergoing bowel resection. Electrophysiological microelectrode recordings for membrane potential changes and mechanical tension recordings for contraction from smooth muscle strips and ileal segments were performed. Drugs affecting the enteric nervous system were applied to measure the changes in activity. Slow waves were detected with a frequency of 9~10/min. There were no cross-sectional differences in resting membrane potential (RMP), amplitude or frequency between outer and inner circular muscle (CM), suggesting that electrical activities could be effectively transmitted from outer to inner CM. The presence of the interstitial cell of Cajal (ICC) at the linia septa was verified by immunohistochemistry. Contractions of strips and segments occurred at a frequency of 3~4/min and 1~2/min, respectively. The frequency, amplitude and area under the curve were similar between CM and LM. In segments, contractions of CM were associated with LM, but propagation varied with antegrade and retrograde directions. Atropine, $N^W$-oxide-L-arginine, and sodium nitroprusside exhibited different effects on RMP and contractions. There were no cross-sectional differences with regard to the characteristics of slow waves in CM. The frequency of contractions in smooth muscle strips and ileal segments was lower than slow waves. The directions of propagation were diverse, indicating both mixing and transport functions of the ileum.

Fatigue crack effect on magnetic flux leakage for A283 grade C steel

  • Ahmad, M.I.M.;Arifin, A.;Abdullah, S.;Jusoh, W.Z.W.;Singh, S.S.K.
    • Steel and Composite Structures
    • /
    • 제19권6호
    • /
    • pp.1549-1560
    • /
    • 2015
  • This paper presents the characterization of fatigue crack in the A283 Grade C steel using the MMM method by identifying the effects of magnetic flux leakage towards the crack growth rate, da/dN, and crack length. The previous and current research on the relation between MMM parameters and fatigue crack effect is still unclear and requires specific analysis to validate that. This method is considered to be a passive magnetic method among other Non-Destructive Testing (NDT) methods. The tension-tension fatigue test was conducted with a testing frequency of 10 Hz with 4 kN loaded, meanwhile the MMM response signals were captured using a MMM instrument. A correlation between the crack growth rate and magnetic flux leakage produces a sigmoid shape curve with a constant values which present the gradient, m value is in the ranges of 1.4357 to 4.0506, and the y-intercept, log C in the ranges of $4{\times}10^{-7}$ to 0.0303. Moreover, a linear relation was obtained between the crack length and magnetic flux leakage which present the R-Squared values is at 0.830 to 0.978. Therefore, MMM method has their own capability to investigate and characterize the fatigue crack effects as a main source of fracture mechanism for ferrous-based materials.

Modified sigmoid based model and experimental analysis of shape memory alloy spring as variable stiffness actuator

  • Sul, Bhagoji B.;Dhanalakshmi, K.
    • Smart Structures and Systems
    • /
    • 제24권3호
    • /
    • pp.361-377
    • /
    • 2019
  • The stiffness of shape memory alloy (SMA) spring while in actuation is represented by an empirical model that is derived from the logistic differential equation. This model correlates the stiffness to the alloy temperature and the functionality of SMA spring as active variable stiffness actuator (VSA) is analyzed based on factors that are the input conditions (activation current, duty cycle and excitation frequency) and operating conditions (pre-stress and mechanical connection). The model parameters are estimated by adopting the nonlinear least square method, henceforth, the model is validated experimentally. The average correlation factor of 0.95 between the model response and experimental results validates the proposed model. In furtherance, the justification is augmented from the comparison with existing stiffness models (logistic curve model and polynomial model). The important distinction from several observations regarding the comparison of the model prediction with the experimental states that it is more superior, flexible and adaptable than the existing. The nature of stiffness variation in the SMA spring is assessed also from the Dynamic Mechanical Thermal Analysis (DMTA), which as well proves the proposal. This model advances the ability to use SMA integrated mechanism for enhanced variable stiffness actuation. The investigation proves that the stiffness of SMA spring may be altered under controlled conditions.

자동차용 엔진 마운트의 피로거동에 관한 연구 (Fatigue Characteristics of Engine Rubber Mount for Automotive)

  • 서창민;오상엽;박대규;장주호
    • 한국해양공학회지
    • /
    • 제23권5호
    • /
    • pp.45-53
    • /
    • 2009
  • In this study, Finite Element Analysis (FEA) was used to decide three kinds of material property of vibration proof rubber with the unique characteristic of non-linear and large deformation. As well, three types of hardness (Hs 50, 55, 60) were compared with the result of fatigue tests, fatigue life was able to be predicted. The request for fatigue life becomes strict more and more as increasing stress under conditions like a compaction, high load and high temperature for parts because it is main characteristics of rubber mount for automotive. Regarding to the fatigue life under dynamic deformation condition, it can be predicted as checking forced deformation extends and its frequency and its strain-life curve. As for material property tests of uniaxial tension test, uniaxial compression test, pure shear test, Ogden model was used for FEA by observing relations between stress and strain's rate as curve fitting. As a result of FEA, fatigue life for rubber mount was predicted and accorded well with the experimental data of fatigue test with hourglass specimens. In addition, its property of the predictable fatigue life method suggested in this study was accorded well with the experimental data by comparing the predicted fatigue life of FEA with the result of fatigue test for rubber component of engine rubber mount.

무정형 PET 재료의 플라스틱 냉간 변형에서의 열처리 효과 (Annealing Effect in the Cold-Plastic Deformation of Amorphous PET Material)

  • 이종영;박성수
    • 폴리머
    • /
    • 제25권1호
    • /
    • pp.56-62
    • /
    • 2001
  • Polyethylene terephthalate(PET) 필름 시편을 약 0.5~500 mm/min의 속도까지 단계적으로 연신시켰을 때, 플라스틱 변형이 일어나는 동안에 투명 및 불투명 밴드들이 존재하는 넥킹영역이 형성되었다. 상기 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 뚜렷하게 발생하였음을 확인할 수 있었다. 한편, 열처리된 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 발생하지 않았음을 확인할 수 있었다. 시편들의 미세구조는 광학 현미경을 통하여 동적으로 관찰하였고, 시편들의 열적 특성은 시차 주사 열량기를 사용하여 10 ${\circ}C$/min의 승온 속도에서 측정하였다. 또한, 시편들의 배향화 및 결정화 정도는 단색-핀홀법을 이용하여 측정하였고, 시편들의 탄성계수는 동적 기계 분석기를 통하여 -150~70 ${\circ}C$의 온도 범위에서 1 Hz의 주파수 대에서 측정하였다. PET 펠렛을 전기로에서 약 83${\circ}C$에서 30분 동안 열처리하여 투명한 PET 제품을 제작하였다.

  • PDF

모세관 작용에 의한 콘택트 렌즈의 운동 모델 (Model on the Capillary Action-Induced Dynamics of Contact Lens)

  • 김대수
    • 한국안광학회지
    • /
    • 제6권2호
    • /
    • pp.85-97
    • /
    • 2001
  • 눈물 층을 사이에 두고 각막 위에 부착되어 있는 렌즈(하드렌즈)에는 모세관작용에 따른 장력이 렌즈가장자리에 균일하게 방사형으로 향하여 작용한다. 순목등에 의한 충격으로 평형상태의 렌즈가 평형 위치에서 벗어나게 되면 눈물층의 간격에 변화가 발생하고 이 변화에 의해 불균일 모세관작용에 기인하는 장력에 따라 렌즈에는 복원력이 발생하고 이 힘에 의해 렌즈는 감쇄운동(진동)을 하게 된다. 이러한 복원력을 계산하고 렌즈의 운동을 예측할 수 있는 미분방정식과 컴퓨터프로그램을 수립하였으며 이 컴퓨터 모델을 사용하여 렌즈의 구경, 베이스 커브, 눈물 층의 두께 등의 변수가 렌즈의 운동에 미치는 영향을 모사(模寫)하였다. 눈물층의 점성에 의한 마찰력이 관성력에 비해 크기 때문에 렌즈는 진동을 하지 않고 시간의 경과에 따라 일률적으로 변위가 감소하는 운동양상을 나타내고 있으며 렌즈의 구경이 증가할수록, 눈물층의 두께가 얇아질수록 복원력이 증가하며 따라서 렌즈가 원위치로 되돌아오는데 걸리는 시간이 짧아지고 있다. 그러나 렌즈의 베이스커브는 그 값이 특정 값을 가질 때 원위치 도달 시간이 최소가 된다. 렌즈의 공진진동수는 눈물층의 두께가 증가할수록 렌즈구경이 감소할수록 낮아지고 있으며 베이스커브가 특정 값을 가질 때 공진진동수 역시 최대가 된다. 실제로 콘택트렌즈를 착용한 상태에서 렌즈의 공진진동수와 동일한 진동수의 외부 충격이 렌즈에 가해지는 경우 급격한 렌즈의 상하 또는 좌우 진동이 예상되며 따라서 렌즈가 탈착 된다든지 또는 렌즈의 형상변형으로 인해 각막에 통증이 발생할 수도 있을 것이다. 고함수(高含水) 소프트렌즈와 강은 diaphragm 그 자체는 탄성이 거의 없다. 그러나 함수 소프트렌즈가 각막 상에 눈물 층을 사이에 두고 부착되어 있는 경우에는 눈물의 표면 장력에 의해 탄성이 유기(誘起)될 수 있으므로 진동의 영향이 있을 것으로 본다.

  • PDF