• ETRI Journal
• /
• 제31권5호
• /
• pp.506-509
• /
• 2009

A novel design of a compact square-ring slot microstrip antenna for achieving circular polarization (CP) operation is proposed and experimentally studied. By using an arrow-shaped slot structure as a radiating element, the resonant frequency of the proposed antenna is significantly lowered, which can lead to a large size reduction for fixed frequency operation. The CP radiation characteristics are achieved by loading with proper asymmetry, which can be placed diagonally. A prototype of the proposed design is implemented and its performance is measured. Measured results show that radiation patterns with good CP characteristics are obtained at the resonant frequency.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.299-304
• /
• 1993

A 1/4 car model(2 DOF system) is employed to evaluate the performance included a quadratic cost functional in frequency domain. The design procedure of feedback control to optimize the performance index results in a modified Linear-Quadratic-Gaussian problem and cultivates a quite simple control algorithm. Computer simulation result is shown that the LQG method using frequency shaped performance index is outstanding in ride comfort and its response converges to the steady state very rapidly in comparison with the known passive suspension, classical design methods LQR/ and LQG.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1996년도 The Korean Institute of Navigation 1996년도 한·중 국제학술 심포지움 및 추계학술발표회 논문집
• /
• pp.125-134
• /
• 1996

A design method of double layered electromagnetic wave absorbers with cross-shaped ferrite prominence in the second layer which has broad band frequency characteristics was proposed. The broad band electromagnetic wave absorber can be designed under some approximations by the theoretical model using the equivalent material constants method for the second layer. Based on the developed model broad band electromagnetic wave absorbers with excellent reflectivity frequency characteristics in the frequency range of 30MHz to 3,990MHz were designed.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1835-1840
• /
• 2008

In this paper, a dual band H-shaped microstrip patch antenna is designed for RFID application. Using shorting pin and H shaped for dual resonators and control dual frequency independently. The antenna shows a good performance at the frequency, 912MHz and 2.45GHz for the radiation characteristic and input impedance matching, as well. The reflection is lower than -10dB and a good directivity higher than 3dB is achieved for both frequency.

• 한국수산과학회지
• /
• 제54권6호
• /
• pp.1036-1044
• /
• 2021

A linear array acoustic transducer with 12 tonpilz elements mounted independently on a gradual wedge-shaped tail mass was fabricated, tested and analyzed. The compensated transducer, which is modified by including a series inductance of 137 µH in the developed linear array transducer, attained improved figure of merit (FOM) performance characteristics compared with the uncompensated transducer. The four resonant frequency bands were identified from the measured FOM curve. The FOM response patterns over the frequency ranges of 31 to 40 kHz and 50 to 60 kHz were relatively uniform, whereas sharp resonance peaks were observed at around 73 kHz and 84 kHz. These results indicate that the developed linear array transducer can be used as an enhanced broadband transducer of echo sounder, and the operating frequency can be selected for more effective echo surveys in the fishing ground.

• 대한전자공학회논문지TC
• /
• 제43권5호
• /
• pp.169-175
• /
• 2006

본 논문에서는 GPS 수신용 안테나인 T형 슬릿을 갖는 마이크로스트립 패치 안테나를 설계 제작하였다. T형 슬릿을 삽입한 마이크로스트립 패치 안테나는 슬릿이 없는 패치 안테나 보다 낮은 주파수에서 공진한다. 이것으로부터 패치의 크기를 축소시킬 수 있다. T형 슬릿를 갖는 마이크로스트립 패치 안테나의 공진 주파수를 계산하기 위하여 패치 표면의 전류 분포로 부터 공진 주파수 공식을 유도하였다. Ensemble 6.0을 이용하여 근사식의 정확성을 검증하였다. 이렇게 구해진 공식을 이용하여 1.575GHz에서 동작하는 최적의 안테나를 설계하였으며, 그 결과 T형 슬릿을 갖는 안테나의 경우 29%까지 안테나의 크기를 감소시킬 수 있었다. 또한 슬릿을 갖는 마이크로스트립 안테나는 대역폭은 매우 좁기 때문에 협대역 특성을 개선하기 위해 구형 슬릇을 갖는 마이크로스트립 패치 안테나를 제안하였다. 제작된 T형을 갖는 마이크로스트립 패치 안테나의 공진 주파수는 1.575GHz이고 대역폭은 50MHz를 얻었다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.37-44
• /
• 2020

In this paper, we proposed a compact printed monopole antenna with an inverted L-shaped slot for dual-band operations. Two operating frequency bands are achieved with the use of an inverted L-shaped slot etched on the radiating strip for bandwidth enhancement and a defected ground structure for return loss improvement in the higher frequency band. The measured results showthat the proposed antenna has impedance bandwidths (S₁₁< -10 dB) of 270 MHz (1.81-2.08 GHz) and 340 MHz (2.36-2.70 GHz), covering the required bandwidths for PCS (1850.5-1989.5 MHz), CDMA 2000 (1850-1990 MHz), TD-SCDMA (1880-2025 MHz) and 2.4 GHz WLAN (2400-2484 MHz). The measured return loss of the proposed antenna has a good value of approximately 27.2 dB at 2.4 GHz WLAN. The antenna's peak gains also have a high value of 1.92 dBi at 2 GHz and 2.12 dBi at 2.45 GHz. The proposed antenna shows omnidirectional radiation patterns over the entire frequency range of interest.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.464-467
• /
• 2003

In this paper, to reduce the patch size of microstrip antenna, folded surface-type patch antenna is designed and fabricated. Size reduction could be achieved because of the downed resonant frequency by the extended current path passing along below the transformated patch surface. Comparison of the patch size at the 1.575 GHz between plane type(length 82 mm${\times}$width 90 mm) and "ㄷ"-shaped folded type is carried and comparision of frequency variation at the same patch size is carried. The result is like that the patch size was reduced than the plane type by 60 mm(73.17 %) at the same frequency. Therefore, it could be checked that "ㄷ"-shaped folded type antenna is advantageous than the plane type in size reduction.

• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.508-512
• /
• 2007

본 연구에서는 십자형 평판 모노폴 안테나에 L자형 슬릿을 두어 이중공진 특성이 발생하는 새로운 형태의 안테나 구조를 제안하였다. 제안하는 안테나 구조에서 이중공진 특성이 발생하도록 하기 위해서는 먼저 십자형 평판 모노폴 안테나의 높이와 길이를 중심주파수에 맞게 설정한 후, 안테나 표면에 L자형 슬릿을 두어 슬릿의 길이 조절에 의해서 가능하다. 본 연구에서 제안하는 안테나의 구조적인 장점은 L자형 슬릿의 길이 조절에 의해 특정 주파수 대역에서 이중공진 특성이 발생하도록 설계 가능하다는 것이다. 또한, 안테나의 특성을 이중공진 대역에서 살펴보면 두 대역에서 모두 무지향성의 방사패턴과 함에 일정 수준 이상의 고이득을 가져 이동체용 안테나에 적합한 특성을 보인다.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.1-8
• /
• 2017

This paper introduces a technique to obtain the broadband characteristics of circularly polarized antennas using an L-shaped probe. A waveguide antenna is suitable for obtaining high gain and handling convenience in some applications; however, the asymmetrical structure of the L-shaped probe results in cross-polarization and frequency dependence on the field distribution of higher-order modes (HOM). In addition to the basic characteristics of a waveguide antenna with an L-shaped probe, the author discusses some techniques to reduce the HOM and cross-polarization. As a result, the 3-dB axial ratio (AR) is obtained with the fundamental mode even when the frequency is expanded to the region for HOM of TM. This reduction is mainly due to the cutoff structure to the TM mode around the short wall of the waveguide. Furthermore, some aperture modification techniques can reduce the cross-polarization in a wide range of angles in the radiation pattern. Such techniques and their mechanisms are discussed in this paper. The obtained performance shows that the proposed antennas have a wide range of angles of 3-dB AR in the radiation pattern, broadband characteristics in impedance and AR, and low variation in group velocity.