• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1096-1103
• /
• 2010

This paper proposes CDC (Continuous Damping Control) algorithm and verifies in multi-body dynamic vehicle. In order to distinguish a road profile on driving, waviness calculated by the filtered vertical-accelerations of sprung and unsprung masses is introduced. Sky-hook control is used at a low waviness road and constant damping level control is used at a high waviness road, where the hard damping level is determined by waviness, roll rate, acceleration, and deceleration. The damping levels of ride, anti-roll, anti-squat, and anti-dive modules are calculated by tuning parameters which is dependent upon vehicle velocity. Therefore this high tunable algorithm is useful to improve the ride and handling performance under various driving conditions. In the simulations, tire and dampers are modelled by SWIFT (Short Wavelength Intermediate Frequency Tire) model and 1st order delay model, and results are compared with conventional damper's.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.270-273
• /
• 2003

The design, fabrication, and measured result of a 4.7 GHz differential VCO (Voltage Controlled Oscillator) for a 5.2 GHz WLAN (Wireless Local Area Network) applications is presented. The circuit is designed in a 0.35 mm technology employing three metal layers. The design is based on a fully integrated LC tank using spiral inductors. Measured tuning range is 10% of oscillation frequency with a control voltage from 0 to 3.0 V. Oscillation power of $\square$ 2.3 dBm at 4.63 GHz is measured with 21 mA DC current at 3V supply. The phase noise is $\square$ 104.17 dBc/Hz at 1 MHz offset.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.90-98
• /
• 1996

We have evaluated the theoretical conversion loss and noise temperature of mixer using the quantum mixer theory and the method to determine the embedding impedance of waveguide-type mixer mount. At fixed backshort position of the mixer, the calculated SSB mixer conversion loss and mixer noise temperature are 5 dB and 10K within frequency range form 85 GHz to 115 GHz, respectively. The SIS mixer has been developed by using through on the calculated rsutls to observe cosmic radio waves. SIS junction of mixer is Nb/Al-AlOx/Nb and it consists of four series array. Area of each of junction is about 2.5${\mu}m^{2}$. The average receiver noise temperature of manufactured receiver with this mixer is about 30 K(DSB). The receiver noise temperature is much lower than that of receiver with a mixer using mechanical tuning backshort.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.274-277
• /
• 2004

An integrated photonic radio frequency (RF) phase shifter has been proposed and fabricated using a nested dual Mach-Zehnder modulator configuration in a new electro-optic polymer. The fabricated device shows a continuous voltage control of the RF signal phase. A near-linear phase shift exceeding 108$^{\circ}$was obtained for a 16-GHz microwave signal by tuning the do control voltage over a 7.8- $V_{pp}$ range.e.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.683-689
• /
• 1998

A control algorithm for multi-stage dampers is developed based on the mode skyhook control concept, and implemented on the full vehicle system environment. The test vehicle system is equipped with the real time controller, four-stage variable dampers and sensors. The real time controller is developed using a digital signal processor(DSP), digital I/O, A/D and D/A converters. The dampers are driven by the electromagnetic actuators of less than 20 msec response time. The sensors include accelerometers, relative displacement transducers, and steering wheel rate sensors, etc. Through a series of tests in laboratory and proving ground, the performance of the semi-active suspension system is evaluated and it is shown that the vehicle dynamic characteristics is improved with the developed damping system. Futhermore, the parameter tuning methods to enhance vehicle dynamic performance are propsoed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.337-340
• /
• 2001

We show that the microstrip ring with a narrow gap exhibits a photonic band gap (PBG) that is generally believed to be created by a periodic array. The discontinuity of impedance at the narrow gap induces the multiple reflections with fixed phase correlation necessary to make the PBG. We have also discussed the tuning of the PBG frequency by applying an external voltage on a varactor mounted on the gap and the applications of this PBG ring as a tunable bandstop filter and a microwave switch.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.756-761
• /
• 2009

In this paper, a X band voltage controlled oscillator is proposed. The oscillator uses a transistor as an oscillating element and its oscillating frequencies are controlled by the tuning voltage of varactor diode. Using the circuit simulation tools, the matching circuits between the transistor and varactor diode, its input and output matching circuits, and a feedback circuits are designed. The measured results of the fabricated oscillator show that its oscillation frequencies are from 10.50GHz to 10.88GHz according to the turning voltages of 1V to 18V, its output power levels are about 4.3dBm, and its phase noise is around -43.5dBc/Hz at 100kHz offset frequency of 10.5GHz.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.439-446
• /
• 1994

Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluld mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further development of active elements which are essenclal in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.454-454
• /
• 2000

An active-C biquadratic filter structure is proposed which consists of only seven OTAs and two grounded capacitors. The proposed circuit can simultaneously realize lowpass, bandpass and highpass transfer functions without changing circuit topology. This technique provides many advantages which include low passive and active sensitivities and, moreover, its Q-factor is electronically tunable and separately from the tuning of the natural angular frequency ${\omega}_o$. PSPICE simulation results are obtained that confirm the theoretical analysis.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.221-232
• /
• 2000

A Gunn waveguide-oscillator, mechanically tunable from 60 to 70 GHz, has been developed for use as a local oscillator(LO) is millimeter radio telescope. Disc size, post size and characteristics of Gunn diode have an effect on the frequency tuning characteristics of Gunn oscillator. In this paper we report experimental results and design criteria for a wideband tunable Gunn oscillator. The developed Gunn oscillator has been used in the 100/150 GHz band dual channel receiver for the Taeduk Radio Astronomy Observatory.