• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1242-1246
• /
• 2007

In this study, FSS(Frequency Selective Surface) with Koch Fractal Curve slot is positioned on the conventional single layer microstrip patch antenna. Numerical results of the proposed antenna bandwidth and the antenna gain are increased compared with those of the conventional single layer microstrip patch antenna. In the future, the fractal geometry of the slot in FSS(Frequency Selective Surface) as a supplementary microstrip patch is researched for the enhancement of the microstrip patch antenna characteristics.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.86-91
• /
• 2010

In this paper, a double-layered frequency selective surface(FSS) superstrate was built and tested. The unit cell of the proposed FSS consists of a ring slot and a dipole-shaped structure and shows a complementary frequency response. Each unit cell is printed on two sides of a substrate. By using these double-layered structures, the first resonant frequency of the pass-band can be lowered. As a result, the size of the unit cell is minimized and the spacing between the other cells is reduced. The proposed FSS-dipole composite antenna is designed for the gain enhancement of wide-band code division multiple access(WCDMA) frequency bands(1.92~2.17 GHz) with a low quality factor(Q=0.17). To verify the gain enhancement performance of the FSS, an FSS-dipole composite antenna was created. Although the FSS layer enhances the gain of the primary radiation source of the dipole antenna, the FSS-dipole complex antenna cannot show a uniform gain over the entire desired frequency band. The experimental results show a gain enhancement of 3 dBi with an FSS superstrate in the WCDMA frequency band.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.607-615
• /
• 2019

In this paper, the electromagnetic effects on the discontinuity structures of the frequency selective radome in manufacturing process based on the X-band were analyzed. In order to fabricate a curved radome using a planar frequency selective surface structure, it is assumed that gaps, slanted gaps, pattern damage, and pattern misalignment between FSS patterns, which are discontinuous elements that can occur at the joint surface of the FSS panel. FSS specimens including continuous elements were fabricated and the frequency transmission characteristics were measured in a free space measurement environment. From the measurement results, resonance frequency shift, transmission performance degradation, and bandwidth variations were found to be the largest when the damaged pattern was bonded to the junction of FSS panels.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.512-520
• /
• 2016

In this paper, a miniaturized frequency selective surface(FSS) for bandstop operation that provides stability for an angle of incidence and polarization is presented. The proposed miniaturized FSS has the unit cell of hexagonal structure with triangular loops and size of the unit cell is $0.081{\lambda}{\times}0.081{\lambda}$ at 2.5 GHz operating frequency, which is very small compared to operating wavelength. In addition, unlike the conventional design, which requires complicated design parameters, the proposed FSS is easily expanded to the desired operating frequency for 2~8 GHz, by controlling the specific design parameters. To validate the simulation results, the FSS structures having different operating frequencies, 2.5 GHz, 5 GHz and 8.2 GHz were designed, fabricated and measured. The comparisons between the simulation and the measured results show good agreement. The proposed miniaturized FSS can provide better frequency stability for different incidence angles and polarizations.

• Composites Research
• /
• v.30 no.5
• /
• pp.273-279
• /
• 2017

This paper describes the fabrication techniques and analysis of hybrid composite plates with an active frequency selective surface (FSS). For fabricating hybrid composite plate with active FSS, an active FSS with a resonance frequency located in the C band can obtained using varactor diodes. The hybrid composite plate was first designed and simulated to determine its electromagnetic properties using the commercial software HFSS. After simulation, active FSSs and hybrid composite plates were fabricated by mounting with varactor diodes. After fabrication, free space measurement was used to determine the electromagnetic properties of active FSS and the hybrid composite plates. The simulation and experimental results were in good agreement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1180-1183
• /
• 2011

In this paper, we present a design of AEM radome with frequency selective surface using unit-cell EM simulation method and verified the performance of AEM radome by the radiation pattern measurements of $16{\times}16$ array-antenna. Measured results under near-field condition showed a good agreement with the simulation and far-field measured ones. And there were no radiation pattern variation between antenna only and antenna with AEM radome. From these results, we verified that AEM radome with frequency selective surface can be a solution to reduce the RCS of conventional mast and radar.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.77-79
• /
• 2009

The wave concept iterative procedure (WCIP) is used to analyze a quasi-square open metallic ring frequency selective surface (FSS). The quasi-square open metallic ring FSS is dual-polarized. When the incident plane wave is polarized in a direction parallel to the FSS' coupled parallel strips, it shows two rejecting bands. Moreover, another rejecting band can be obtained if the source plane wave is perpendicularly polarized with respect to the FSS' coupled parallel strips. The three resonant frequencies are inversely proportional to the length of the FSS' coupled strips to provide an easy fine tuning of the FSS structure. The simulated results obtained using WCIP are compared to the measured results, and a good agreement is reported.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.36-44
• /
• 2007

The wave concept iterative procedure (WCIP) is used to analyze arbitrarily shaped frequency selective surfaces (FSS). The WCIP method is developed from the fast modal transform based on a two-dimensional fast Fourier transform algorithm. Using the proposed procedure, less computing time and memory are needed to calculate the scattering parameters of the FSS structure. The method is applied to the modeling of an FSS structure of a rectangular patch and a comparison with experimental results confirms good agreement.

• Composites Research
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2011

In this paper, Particle Swarm Optimization(PSO) is applied to the design of the Frequency Selective Surface(FSS) and residual stresses of hybrid radome is predicted. An equivalent circuit model with Square Loops arrays was derived and then PSO was applied for acquiring the optimized geometrical parameters with proper resonant frequency. Residual stresses occur in the FSS embedded composite structures after cocuring and have a great influence on the strength of the FSS embedded composite structures. They also effect transmission quality because of delamination. Therefore, the thermal residual stresses of FSS embedded composite structures were analyzed using finite element analysis with considering the effects of FSS pattern, and composite stacking sequence.