• 한국환경보건학회지
• /
• 제30권1호
• /
• pp.15-21
• /
• 2004

In an attempt to analyze the characteristics of domestic pathogenic strains of S. pneumoniae, the basic epidemiological charactristics of pathogenic strains such as their serotypes and frequency of penicillin resistance, and pattern of chromosomal DNA from PFGE(pulsed-field gel electrophoresis) were observed. For this study,56 strains of S. pneumoniae isolated from inpatients and outpatients in the four domestic university hospitals were collected from January to December in 1998. Among those strains, a total of 56 pathogenic strains from blood(39 isolates), cerebrospinal fluid(8 isolates) and other specimen(9 isolates) were selected and isolated. The penicillin resistance frequency of those 56 strains was identified with disk diffusion method with 66.1％. From the invasive strains, predominant serotypes were isolated in the order of 19F(12.5％), 23F(10.7%), 14(10.7%) and 9V(10.7％), totalling 45 percent. This experiment also used PFGE patterns to compare the correlations among genetic subtypes in several serotypes. The DNA fragments digested with Sma I and Apa I were resolved by PFGE. The PFGE patterns digested with Sma I were better than Apa I for analysis. In the DNA fragments digested with Sma 1, PFGE analysis of 56 S. pneumoniae isolates showed 25 different patterns. As a result, serotype was on the whole correlated to PFGE pattern on the ground that each different PFGE pattern by serotype was observed. This study can be utilized not only fur the study of incidence trend of domestic pneumococcal diseases but also as a useful basic data for the development of identification tool and treatment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.414-427
• /
• 2020

The finite element method is used to simulate the navigation of an ice-area bulk carrier in broken ice fields. The ice material is defined as elastic, and the simulations are accomplished at four model speeds and three ice concentrations. The movements of ice floes in the simulation are consistent with those in the model test, and the percentage deviation of the numerical ice resistance from the ice resistance in the model test can be controlled to be less than 15 %. The key characteristics of ice loads, including the average ice loads, extreme ice loads, and characteristic frequency, are analyzed thoroughly in a comprehensive manner. Moreover, the effects of sailing speed and ice concentration on the ice loads are analyzed. In particular, the stress distribution of ice floes is presented to help understand how model speed and concentration affect the ice loads. The "ice pressure" phenomenon is observed at 90 % ice concentration, and it is realistically reflected both in the time―and frequency―domain ice force curves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.400-405
• /
• 2004

In this study, the optimal welding condition of the input power was selected experimentally through the ERW simulator, which is equal to welding status of ERW part in pipe. This condition is the input power 250kW in the heat treatment of the $900^{\circ}C$ normalizing derived from the nondestructive technique and impact energy. In order to evaluate the variation of the fatigue life in the pipe, fatigue surface crack growth test of base and optimal welded metal were performed statistically. As stress intensity factor range (${\Delta}K_s$) increases, the fatigue crack propagation rate (da/aN) of the base metal is faster than that of the welded joint. The variation of the fatigue life in the ERW pipe was estimated statistically using Monte-Carlo simulation with the standard deviation of material constants (C and m) of the paris law in the specimen.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.655-668
• /
• 2009

본 총설에서는 수정진동자 센서의 원리와 질량, 점성, 점탄성의 변화에 기초한 수정진동자 센서의 응용에 관하여 고찰하였다. 수정진동자의 기본원리와 공진주파수-공진저항 다이어그램에 관하여 상세히 기술하였다. 카본을 피막한 가스센스, 혈액응고를 이용한 센스, 전기화학분석, 결정화 분석 등에 관한 응용 예를 소개하였다. 이러한 연구 결과를 토대로 새로운 바이오센서나 화학센서 개발 가능성에 관하여 고찰하였다.

• 한국환경보건학회지
• /
• 제35권4호
• /
• pp.278-286
• /
• 2009

The total of 181 students in Seoul were made up questions to analysis hand washing awareness from 2007 to 2008. And their hands were sampled to isolate Staphylococcus aureus for testing antibiotic resistance. The average of hand washing frequency was $2.8{\pm}2.6$ per day in their schools. The rates of the students washing hands before eating food, after outdoor activity and after using bathroom were 22.2%, 24.4% and 49.4%, respectively. The rate of students washing hand less than 20 seconds was 64.4%. The students of 43.3% answered that they thought they were washing hands well. The middle school students were worse than elementary and high school students were aware of the frequency, duration and activity of hand washing. The isolation rate of S. aureus on the hands was 29.4%. The isolates were resitant to ampicillin (28.6%), chloramphenicol (6.1%), erythromycin (31.0%), gentamycin (2.0%), penicillin (79.6%) and tetracycline (6.1%) of 17 antibiotics tested. They were all sensitive to oxacillin and vancomycin.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.127-137
• /
• 1987

The evaluation of the elastic-plastic fracture toughness $J_{1C}$ was performed on the center of weld metal(CWM), the heat affected zone (HAZ) and the base metal (BM) of API 5LB steel pipes welded by the high frequency electric resistance welding. The $J_{1C}$ was evaluated by the JSME R-Curve and JSME SZW methods using the smooth and side-grooved specimens. The results are as follows; (1) The $J_{1C}$ values by the SZW method are overestimated as compared with those by the R-curve method, because the micro-crack is formed as SZW increase with the deformation at SZ after initiation of the ductile crack. (2) The everage of $J_{1C}$ values by the the R-curve and the SZW methods in side-grooved specimens tended to decrease in comparison with smooth specimens 9.42% at CWM, 4.2% at HAZ, 23.2% at BM, respectively. (3) The boundary of the fatigue pre-crack, stretched zone, and dimple regions appeared more clearly in side-grooved specimens, for the slight change of SZW in the direction of the plate thickness, as compared with smooth specimens.

• 한국안광학회지
• /
• 제4권1호
• /
• pp.21-25
• /
• 1999

RF(radio-frequency) magnetron 스퍼터링 장치에 질소가스와 아르곤가스를 동시에 주입하면서 Ti 타켓을 스퍼터링하여 TiN, 박막을 유리기판위에 제작하였다. 박막제작시 RF power supply 출력은 240W로, 증착기 내부의 온도는 $200^{\circ}C$를 유지하였다. TiN, 박막은 알곤 가스를 20sccm으로 고정시킨 상태에서 질소를 3sccm부터 9secm까지 변화시켜가며 증착시켰다. 이때 박막의 면저항과 화학적 조성과의 관계를 분석하기 위하여 XPS depth profiling과 4점 탐침법을 사용하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.20-24
• /
• 1989

The time optimal position control scheme can be repeatedly taken from the initial state of a dynamic system to a desired one as fast as possible at the industrial drives. In this case, the machine parameters will vary due to temperature, frequency, and saturation effects. In particular, the rotor resistance value changes dramatically with temperature and frequency. These changes affect the command values of the stator current components and slip speed. There is a mismatch between the commanded variables and actual variables of the induction motor drive, and this situation leads to decoupling of the vector controller from the plant, i.e the induction motor. Consequences of such decoupling include the initiation of oscillations of the rotor flux and unsuitable switching of electromagnetic torque of the induction motor servo drive. Therefore, a rotor resistance parameter compensating method for the induction motor is described.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.251-263
• /
• 2008

In this paper, we report an analytical modeling and 2-D Synopsys Sentaurus TCAD simulation of ion implanted silicon carbide MESFETs. The model has been developed to obtain the threshold voltage, drain-source current, intrinsic parameters such as, gate capacitance, drain-source resistance and transconductance considering different fabrication parameters such as ion dose, ion energy, ion range and annealing effect parameters. The model is useful in determining the ion implantation fabrication parameters from the optimization of the active implanted channel thickness for different ion doses resulting in the desired pinch off voltage needed for high drain current and high breakdown voltage. The drain current of approximately 10 A obtained from the analytical model agrees well with that of the Synopsys Sentaurus TCAD simulation and the breakdown voltage approximately 85 V obtained from the TCAD simulation agrees well with published experimental results. The gate-to-source capacitance and gate-to-drain capacitance, drain-source resistance and trans-conductance were studied to understand the device frequency response. Cut off and maximum frequencies of approximately 10 GHz and 29 GHz respectively were obtained from Sentaurus TCAD and verified by the Smith's chart.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.176-183
• /
• 2005

Laser heat treatment technology is used for improving the feature of fatigue resistance and wear resistance in mobile parts. The purpose of this study is to compare the characteristics of laser heat treatment and high frequency heat treatment, which is commonly used in industrial place. For the preemptive experiment, the distribution, depth and size of hardening and its micro-structural features were compared between surface heat treatment case by defocusing and variables of each process for heat treatment by exclusively manufactured heat treatment optical system. As a result, high frequency heat treatment has wide distribution of hardening depth and width about 3 times larger than laser heat treatment, however, its average hardness showed 621.4Hv which is smaller than the average hardness of laser heat treatment with 691Hv.