• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.293-304
• /
• 2020

In this paper, various modulation techniques, including the legacy Global Navigation Satellite System (GNSS) signal modulation techniques, are introduced and the spectral characteristics and correlation characteristics of signals with various modulation techniques are analyzed based on numerical simulation. With the development of various GNSS services, the limited frequency band has become increasingly saturated, and issues of interoperability and compatibility have emerged in the new GNSS design. Since the efficient allocation of frequency resources is closely related to spectrum design, modulation techniques are one of the important signal design parameters of new signal design. Signal modulation techniques are closely related to various figure of merits (FoMs) as well as spectrum characteristic, and in some cases there is a complicated trade-off between FoMs. Thus, the FoMs associated with modulation technology should be analyzed and the best signal candidates should be chosen carefully via the trade-off analysis for FoMs. In this paper, we define the modulation technique based on Phase Shift Keying (PSK), Binary Offset Carrier (BOC) and Continuous Phase Modulation (CPM) for the design of KPS signals, and the FoMs of signals in terms of spectrum and correlation function are evaluated. Signals with various modulation techniques are implemented through a numerical simulation, and the relevant FoMs are analyzed.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1628-1635
• /
• 2006

A new frequency-modulated m-sequence correlation technique was described. It has. been seen that the frequency modulation scheme leads to higher signal-to-noise ratio than direct sequencing and less hardware effort than PSK modulation scheme. The operating frequency of the correlation system was deduced. The optimal frequency for the frequency-modulated m-sequence correlation system should be 1.35 times of the center frequency of the transducer. The application of this correlation technique to electromagnetic ultrasonic system was computer-simulated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1177-1181
• /
• 2000

Usually, in many applications. high frequency resonant inverters are used, and the PAM(Pulse Amplitude Modulation), PFM(Pulse Frequency Modulation) or PWM(Pulse Width Modulation) techniques are used to control the output power of resonant inverters. And the resonant inverters have to control the output frequency for the reliable operation under the variable load conditions. In this paper, a new switching scheme is proposed as a resonant frequency following control of resonant inverters. With the proposed method. it can be obtained that optimum resonant frequency and unity output displacement factor under the variable resonant frequency adaptively. The detail algorithm of the proposed switching scheme and its characteristics are discussed. And the veridity of the proposed method is confirmed with the experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.299-306
• /
• 2002

The load frequency control(LFC) of power system is one of important subjects in view of system operation and control. That is, even though the rapid load disturbances are applied to the given power system, the stable and reliable power should be supplied to the users, converging unconditionally and rapidly the frequency deviations and the tie-line power flow ones of each area into allowable boundary limits. Nonetheless of such needs, if the internal parameter perturbation and the sudden load variation are given, the unstable phenomena of power systems can be often brought out because of the large frequency deviation and the unsuppressible power line one. So, an optimal modulation controller for UC of multi-area power system is designed by a recursive algorithm that determines the state weighting matrix Q of a linear quadratic performance criterion. The optimal modulation controller is based on optimal control and can obtain the exact dynamic response of the UC of multi-area power system in the time domain. The performances of the resultant optimal modulation control, that is, the steady-state deviations of frequency and tie-line power flow and the related dynamics, were investigated and analyzed in detail by being applied to the UC of multi-area power system in the perturbations of predetermined internal parameters. Through the simulation results tried variously in this paper for disturbance of stepwise load changes, the superiorities of the proposed optimal modulation controller in robustness and stability were proved.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.301-304
• /
• 2008

This paper presents a lossless inductor snubber-assisted series resonant high frequency inverter using the trench gate IGBTs for the electromagnetic induction eddy current-heated fixing roller in copy and printing machines in a new generation. This soft switching high-frequency inverter can completely achieve zero current soft switching (ZCS) commutation mode transitions and wide power regulation under its constant frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally presented for a constant frequency PDM strategy under a ZCS operation, together with its output power regulation characteristics-based on the pulse density modulation. The effectiveness of this soft switching high-frequency inverter is confirmed for the fixing equipment with the induction-heated fixing roller.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.28-36
• /
• 2011

In this paper, a three phase cycloconverter type high frequency AC link inverter is discussed. The configuration consists of a high frequency full-bridge inverter and a high frequency transformer followed by a three phase cycloconverter whose switch is composed of anti-series connected MOSFETs with a common source. A simple digital control strategy based on space vector modulation (SVM) and repetitive control for the cycloconverter is proposed although its input voltage is a high frequency AC pulse. The operation principle of the proposed control strategy is analyzed and the equivalent working modes during one interval are also presented. The effectiveness of the proposed control strategy is verified through Matlab/Simulink simulations and experiments on a 1.45kW prototype.

• 한국음향학회지
• /
• 제35권1호
• /
• pp.8-15
• /
• 2016

Fractional 푸리에 변환(Fractional Fourier Transform : FrFT)은 기존의 푸리에 변환의 일반화된 형태로서, 변환차수 ${\alpha}$에 따라 임의의 시간-주파수 영역에서의 신호해석이 가능하다. FrFT는 특히 LFM(Linear Frequency Modulation) 신호의 분석에 있어 잡음에 강한 특성으로 인해 많은 장점을 가진다. 본 논문에서는 능동소나에서 표적에 맞고 반향된 수신신호의 FrFT 스펙트럼으로부터 표적과의 거리를 추정하는 새로운 방법을 제안하였다. 합성한 표적 신호를 통해 제안한 방법의 타당성을 검증하였으며, 실제 수중 실험을 통해 얻은 잡음 및 잔향 환경에서의 신호에서도 신뢰성 있는 표적과의 거리 추정이 가능함을 확인하였다.

• 전력전자학회논문지
• /
• 제5권2호
• /
• pp.192-199
• /
• 2000

본 논문은 고주파 유도 가열기의 전력조절을 위해 뉴로-퍼지 알고리즘을 이용하고, IGBT를 사용한 위상 전이 펄스변조(PSPM)와 주파수 추종 펄스변조(FEPM) 가 조절되는 공진 고주파 인버터를 응용한 유도가열기를 설명한다. 이는 실제로 산업 현장에서 20KHz~500KHz 유도 가열 및 유도 용해 전원장치용으로 쓰인다. 위상 전이 펄스변조 (PSPM) 정전력 조절 기술을 바탕으로 한 적응 주파수 추종기법은 스위칭 손실을 최소화하고 전력조절을 용이하게 하기 위해 소개되어졌다. 뉴로-퍼지제어기를 사용하여 만들어진 실험장치는 성공적인 논증과 토의가 되어졌다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.166-171
• /
• 2012

본 논문에서는 가시광 LED를 이용한 근거리 수중 광무선 통신 기술을 제안하였다. 수중 통신을 위한 기존 음향 시스템의 대안으로 부상하는 가시광 LED 통신은 고품질의 높은 통신 속도를 보장한다. 수중에서 근거리 통신을 위하여 주파수 변조 방식을 적용한 광 무선 오디오 시스템을 개발하였으며 CD4046B 위상잠김루프를 이용하여 주파수 변조와 복조 회로 부분을 구현하였다. 수조내에서 송신단과 수신단을 30 cm 떨어뜨린 후 100 kHz의 변조 중심 주파수에서 오디오 신호를 전송하여 성공적으로 수신됨을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1129-1133
• /
• 2002

This paper presents an electronic ballast using a novel multiplex modulation method for the metal halide lamp. The proposed modulation method, which has a modulating signal of swept multiplex frequency, can eliminate the acoustic resonance more effectively than the conventional modulation method, which has a modulating signal of constant frequency. For the purpose of future application specific integrated circuits (ASIC), the controller of the proposed ballast has been designed only with erasable programmable logic devices (EPLDs), but without a microprocessor. In this paper, detailed proposed modulation schemes are described and experimental results on the proto-type 150W metal halide lamp ballast with the proposed modulation method are discussed.