• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권2호
• /
• pp.713-725
• /
• 2022

Mostly, artificial intelligence does not show any definite change in emotions. For this reason, it is hard to demonstrate empathy in communication with humans. If frequency modification is applied to neutral emotions, or if a different emotional frequency is added to them, it is possible to develop artificial intelligence with emotions. This study proposes the emotion conversion using the Generative Adversarial Network (GAN) based voice frequency synthesis. The proposed method extracts a frequency from speech data of twenty-four actors and actresses. In other words, it extracts voice features of their different emotions, preserves linguistic features, and converts emotions only. After that, it generates a frequency in variational auto-encoding Wasserstein generative adversarial network (VAW-GAN) in order to make prosody and preserve linguistic information. That makes it possible to learn speech features in parallel. Finally, it corrects a frequency by employing Amplitude Scaling. With the use of the spectral conversion of logarithmic scale, it is converted into a frequency in consideration of human hearing features. Accordingly, the proposed technique provides the emotion conversion of speeches in order to express emotions in line with artificially generated voices or speeches.

• 한국통신학회논문지
• /
• 제40권9호
• /
• pp.1699-1709
• /
• 2015

고속열차와 같은 이동체는 높은 도플러 주파수 천이가 발생하고, 이에 따라 높은 캐리어 주파수 옵셋이 생겨서 이를 보상하지 않으면 통신 성능의 열화를 가져온다. OFDMA 방식의 다중 단말 접속 방식에서 기지국이 상향링크 주파수 옵셋을 보상하기 위해서 복잡한 하드웨어가 필요하다. 본 논문은 기지국의 부담을 줄이고, 간단하게 주파수 옵셋 추정 및 보상을 하기 위한 방법을 제안한다. 제안한 방법은 주파수 옵셋 보상을 위해 하드웨어로 단말은 추가로 곱셈기 하나만 필요하여, 기지국 직접 보상에 비해서 많은 하드웨어를 감소시킬 수 있다. 제안한 방법은 밀리미터 통신 기반 고속철도 통신 시스템 환경에서 시뮬레이션을 수행하였다. 시뮬레이션을 통해서 제안한 방법이 5G 이동통신의 요구사항인 500 km/h 속도의 높은 도플러 주파수 천이 상황에서도 효과적으로 동작함을 확인 하였다.

• Journal of information and communication convergence engineering
• /
• 제19권1호
• /
• pp.48-53
• /
• 2021

Herein, we propose a document analysis system that analyzes papers or reports transformed into XML(Extensible Markup Language) format. It reads the document specified by the user, extracts keywords from the document, and compares the frequency of keywords to extract the top-three keywords. It maintains the order of the paragraphs containing the keywords and removes duplicated paragraphs. The frequency of the top-three keywords in the extracted paragraphs is re-verified, and the paragraphs are partitioned into 10 sections. Subsequently, the importance of the relevant areas is calculated and compared. By notifying the user of areas with the highest frequency and areas with higher importance than the average frequency, the user can read only the main content without reading all the contents. In addition, the number of paragraphs extracted through the deep learning model and the number of paragraphs in a section of high importance are predicted.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.972-983
• /
• 1996

This paper proposes a new technique for frequency offset correction for OFDM systems on a frequency selective fading channel. Frequency offset in OFDM introduces interchannel interference among the multiple subcarriers of OFDM signal. To compensate the interference, this paper describes an algorithm with two stages:acquisition and tracking. At both stages, the proposed algorithm oversamples the received OFDM signal to obtain a couple of demodulated symbol sets. At acquisition stage the frequency offset is reduced to half or less of the intercarrier spacings by matching the sign pattern of each element of the sets. Next, at tracking stage the frequency offset is corrected with a frequency detector which is controlled by the correlation of the two sets. It is shown that the proposed algorithm can correct the frequency offset in the event of uncertainty in the initial offset that exceeds one half of the intercarrier spacing. In addition, the proposed algorithm is robust to transmitted symbols and channel characteristics by using oversampled symbol sets.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.371-378
• /
• 2015

In this paper, a different type of pulse width modulation (PWM) control scheme for a buck converter is introduced. The proposed buck converter uses PWM with frequency hopping and a low quiescent.current low dropout (LDO) voltage regulator with a power supply rejection ratio enhancer to reduce high spurs, harmonics and output voltage ripples. The low quiescent.current LDO voltage regulator is not described in this paper. A three-bit binary-to-thermometer decoder scheme and voltage ripple controller (VRC) is implemented to achieve low voltage ripple less than 3mV to increase the efficiency of the buck converter. An internal clock that is synchronized to the internal switching frequency is used to set the hopping rate. A center frequency of 2.5MHz was chosen because of the bluetooth low energy (BLE) application. This proposed DC-DC buck converter is available for low-current noise-sensitive loads such as BLE and radio frequency loads in portable communications devices. Thus, a high-efficiency and low-voltage ripple is required. This results in a less than 2% drop in the regulator's efficiency, and a less than 3mV voltage ripple, with -26 dBm peak spur reduction operating in the buck converter.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권6호
• /
• pp.404-409
• /
• 2014

This paper presents a Spread Spectrum Clock Generator (SSCG) based on Relaxation oscillator using Up/Down Counter. The current is controlled by a counter and the spread spectrum of the Relaxation Oscillator. A Relaxation Oscillator with temperature compensation using the BGR and ADC is presented. The current to determine the frequency of the Relaxation Oscillator can be controlled. The output frequency of the temperature can be compensated by adjusting the current according to the temperature using the code that is the output from the ADC and BGR. EMI Reduction of SSCG is 11 dB, and Spread down frequency is 150 kHz. The current consumption is $600{\mu}A$ from 5V and the operating frequency is from 2.3 MHz to 5.75 MHz. The rate of change of the output frequency with temperature was approximately ${\pm}1%$. The SSCG is fabricated in a 0.35um CMOS process with active area $250um{\times}440um$.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.861-875
• /
• 2015

This paper presents a wide frequency range LLC resonant controller IC for LED backlight units. In this paper a new phase-domain resonance deviation prevention circuit (RDPC), which covers a wide frequency and input voltage range, is proposed. In addition, a wide range gate clock generator and an automatic dead time generator are proposed. The chip is fabricated using 0.35 μm BCD technology. The die size is 2 x 2 mm2. The frequency of the clock generator ranges from 38 kHz to 400 kHz, and the dead time ranges from 300 ns to 2 μs. The current consumption of the LLC resonant controller IC is 4 mA for a 100 kHz operation frequency using a supply voltage of 15 V.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.495-513
• /
• 2020

The correlation identification of the subsurface is a novel electrical prospecting method which could suppress stochastic noise. This method is increasingly being utilized by geophysicists. It achieves the frequency response of the underground media through division of the cross spectrum of the input & output signal and the auto spectrum of the input signal. This is subject to the spectral leakage when the cross spectrum and the auto spectrum are computed from cross correlation and autocorrelation function by Discrete Fourier Transformation (DFT, "To obtain an accurate frequency response of the earth system, we propose an improved correlation identification method which uses all phase Fast Fourier Transform (APFFT) to acquire the cross spectrum and the auto spectrum. Simulation and engineering application results show that compared to existing correlation identification algorithm the new approach demonstrates more precise frequency response, especially the phase response of the system under identification.

• ETRI Journal
• /
• 제28권1호
• /
• pp.45-50
• /
• 2006

An RC oscillator using amorphous silicon thin film transistors was developed. The oscillation frequency and its dependence on resistance and bias voltage were studied. The frequency was controlled by adjusting the feedback resistance of the oscillator. The highest measured frequency of the oscillator was around 140 kHz, which is acceptable for low-end radio frequency identification (RFID). Since a low-end RFID circuit needs low cost and a simple process, an amorphous silicon oscillator is suitable.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.226-229
• /
• 2003

Under the prsence of the frequency and timing offset, we evaluate the BER performance of the FFH-MA system using noncoherent M-ary FSK modulation in the Rayleigh fading channel. The numerical resuts show that while the frequency and timing offset increases at a given SNR, the BER is severely degraded. The threshold level used in the envelope detector increases with the increase of the frequency and timing offset, and with the proper selection of the threshold level, the BER can be improved under the presence of such offsets.