• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1409-1414
• /
• 2013

A new calculation method for iron loss coefficients is proposed by using the Steinmetz equation from Epstein data. The hysteresis loss must have linear characteristic according to the frequency. However, the existing iron loss coefficients are defined by formula of frequency. In this case, the hysteresis loss has non-linear characteristics by frequency. So, in this paper, the iron loss coefficients were defined by a function of the magnetic flux density, and the iron loss calculation is applied for Interior Permanent Magnet Synchronous Motor(IPMSM) of 600(W) and 200(W). The iron loss calculation results and the experimental results are compared according to the various materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.338-341
• /
• 1993

A EEG(ElectroEncephaloGram) compression scheme based on subband coding techniques is presented in this paper. Considering the frequency characteristics of EEG, the raw signal was decomposed into different frequency bands. After decomposition, optimal bit allocation was done by adapting to the standard deviation in each frequency bands, and decomposed signals were quantized using pdf(probability density function)-optimized nonuniform quantizer. Based on the above mentioned coding scheme, coding results of various multichannel EEG signal were shown with compression ratio and SNR(signal-to-noise ratio).

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.521-528
• /
• 2006

The vibration fatigue is suitable case of fatigue problem that system is exposed to the random or other irregular sources. Even some kinds of effort using power spectral density (PSD) and statistical concept was presented to cope with the intangible force signal, it is still lack of providing a reasonable solution when its exciting frequency is near or beyond of first eigenvalue. In this paper, energy approach method is presented to calculate a vibration induced fatigue damage in frequency domain. Since the corresponding damage become much larger than nominal case when the vibration is coupled with a mode shape of given structure, the new technique compensate the characteristics of structure with a measured frequency response function (FRF) between forcing acceleration and responding stress.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.130-135
• /
• 1995

Wind-induced vibration of buildings with viscoelastic dampers are studied analytically. The added viscoelastic dampers change the damping distribution and reduce the response of buildings. The distribution of damping resistance that results from these viscoelastic dampers is known as non-classical or non-proportional. Non-classically damped structures are analyzed by state-space approach. However, this approach is complex and time-consumming compared to classical approach. This paper is aimed at the analysis of wind-induced Vibration Of buildings With Viscoelastic dampers. The Process Of State-Space approach is studied and the approximate analysis is suggested to overcome the complex and time-consuming access. For numerical certification, PSDF(Power Spectral Density Function) is obtained. Autocorrelation function is obtained in time domain and PSDF is obtained by fourier transformation of this function in frequency domain. It is found that Approximate method can give close approximation to exact solution.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.123-126
• /
• 2002

Acoustic vibration analysis has been performed using random vibration analysis module of MSC/NASTRAN to evaluate the safety of the composite satellite antenna structure under the acoustic pressure from the launch vehicle. It was found that maximum $3\sigma$ stress by acoustic excitation was less than allowable stress.

• 한국세라믹학회지
• /
• 제17권3호
• /
• pp.129-132
• /
• 1980

The effect of the additive on the dielectric property of TiO2 containing 0-2.5 wt. % ZnO was investigated as a function of frequency $5$\times$10^4$ to $6.3$\times$10^7$ cps and temperature from 25 to 375$^{\circ}C$. The dielectric constant decreased due to increasing density and grain size effect with increasing ZnO concentration.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.32-36
• /
• 2011

가뭄은 홍수와 같이 단기간에 피해를 발생시키는 것이 아니라 장기간에 걸쳐 서서히 진행되므로 그 심각성을 인식하기 어렵고 국가 차원의 대책 또한 미비한 실정이다. 따라서 본 연구에서는 가뭄의 발생특성을 파악하기 위해 기상학적 가뭄지수를 산정하여 가뭄빈도해석을 실시하였다. 빈도해석방법은 weibull분포를 이용한 매개변수적 방법과 경계핵밀도함수(Boundary Kernel Density Function)를 이용한 비매개변수적 방법을 병행하여 재현기간별 가뭄심도를 산정하였다.

• Smart Structures and Systems
• /
• 제9권6호
• /
• pp.473-487
• /
• 2012

GPS has become an established technique in structural health monitoring. This paper presents the application of an on-line GPS RTK system on the Zhujiang Huangpu Bridge (China) for monitoring bridge deck and towers movements. In this study, both the form and functions of movements of the deck and towers of the bridge under affecting loads were monitored in lateral, longitudinal and vertical directions. Such movements were described in time and frequency domains by determining the trend, torsion, periodical of the series using probability density function (PDF). The results of the time series GPS data are practical and useful to bridge health monitoring.

• 한국통신학회논문지
• /
• 제39C권7호
• /
• pp.573-581
• /
• 2014

본 논문에서는 주파수 도약 대역확산 시스템에서 도약에 대한 사전 정보 없이 수신신호를 복조 할 수 있는 도약 위상 추정기를 제안하였다. 복조 과정은 첫째 샘플링 된 수신 신호를 DFT(Discrete Fourier Transform)를 한 후 도약 대역 내에 존재하는 신호 중 가장 큰 크기를 갖는 주파수 성분을 선택한다. 둘째 검출된 신호는 차곱 과정과 다운샘플링을 통하여 기저대역신호로 변환된 후 도약위상 추정기에서 도약 주파수에 의해서 발생된 도약 위상을 추정한다. 제안된 위상 추정기의 수학적 모델에 대한 성능 분석을 위해 확률밀도함수 및 분산 성능을 구하고 모의실험 결과와 비교하여 잘 일치함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1168-1171
• /
• 2003

In contrast to a conventional transformer, the flat transformer is made using a number of small ferrite cores. Two cores for transformer and one core for inductor, which composed one module. Many modules can be connected together to form a flat matrix transformer. This structural arrangement eliminates the single hot spot problem in conventional transformers and permits high current density pertains at high frequency. In this study, the ferrite magnetic cores of Mn-Zn system for the Flat transformer were manufactured and the electrical and magnetic characteristics of its tested. The power loss of sample FO2(Mn-Zn ferrite) sintered at $1350^{\circ}C$ was $350kW/m^3$ in test conditions of 250kHz, 200mT and $100^{\circ}C$, which showed the good power loss property in high frequency. The power loss of FO2 samples has been studied as a function of magnetic flux density and frequency. Steinmetz exponent was 2.82 at 250kHz and 2.73 at 500kHz. These results illustrated the switching of power loss mechanism in ferrite core from hysteresis losses to eddy current losses or others.