• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.309-316
• /
• 2019

In this paper, a low-jitter delay-locked loop that compensates for local clock skew is presented. The proposed DLL consists of a phase splitter, a phase detector(PD), a charge pump, a bias generator, a voltage-controlled delay line(VCDL), and a level converter. The VCDL uses self-biased delay cells using current mode logic(CML) to have insensitive characteristics to temperature and supply noises. The phase splitter generates two reference clocks which are used as the differential inputs of the VCDL. The PD uses the only single clock from the phase splitter because the PD in the proposed circuit uses CMOS logic that consumes less power compared to CML. Therefore, the output of the VCDL is also converted to the rail-to-rail signal by the level converter for the PD as well as the local clock distribution circuit. The proposed circuit has been designed with a $0.13-{\mu}m$ CMOS process. A global CLK with a frequency of 1-GHz is externally applied to the circuit. As a result, after about 19 cycles, the proposed DLL is locked at a point that the control voltage is 597.83mV with the jitter of 1.05ps.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.699-702
• /
• 1998

This paper presents a 500MHz 1.1㎱ 32kb synchronous CMOS SRAM macro using $0.35\mu\textrm{m}$ CMOS technology. In order to operate at high frequency and reduce power dissipation, the designed SRAM macro is realized with optimized decoder, multi-point sense amplifier(MPSA), selective precharge scheme and etc. Optimized decorder and MPSA respectively reduce 50% and 40% of delay time. Also, a selective precharge scheme reduces 80% of power dissipation in that part.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.185-192
• /
• 2012

Line planning is to determine the frequency of trains on each line to satisfy origin-destination demand while minimizing total operation cost. However, different from the line planning in passenger transportation, it is more important at which intermediate stations each train should be stopped and shunted because the freight car handling works like drop-off or(and) pick-up can incur much time and high cost so that the delay deteriorates the quality of rail freight transportation service. We present an optimization model for constructing line plan in rail freight transportation to simultaneously minimize the train operation cost and total transportation time of freights. And we suggest a column generation approach for our problem, which can solve the real network instances in reasonable computation times.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.563-567
• /
• 2004

In this paper, a remote temperature sensor based on surface acoustic wave is introduced and the issues on design, manufacturing, and test of the sensor are addressed. SAW sensors having single and double electrode are prepared on the 128$^{\circ}$ YX-LiNbO$_3$ Substrate. The frequency responses of SAW sensors on the temperature change are compared. To measure the change of center frequency, two center frequencies on the 3dB and 20dB are measured and compared. Since the center frequency on the temperature change from -30$^{\circ}C$ to 80$^{\circ}C$ is linearly changed, the SAW sensor is applicable to the temperature sensor.

• Journal of The Korean Astronomical Society
• /
• v.4 no.1
• /
• pp.9-16
• /
• 1971

The asymmetry of received intensity pattern within the bandwidth is derived from the analogy of the intensity distribution of two-slit interference. This suggests that the length of $\frac{1}{2}{\lambda}$ delay line should be adjusted to the slightly upper frequency than the central frequency of the radio telescope with a wide bandwith. Some strange communication signals and man-made noises prevented us from obtaining the discernible information from the observed data for the sun. To overcome this difficulties, it is necessary to alter the operating frequency and site. It will be fo1lowed to measure the angular dimensions of the superposed radio sources by changing the distance between two antennas.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.11-24
• /
• 2019

This paper investigates the performance comparison of a Terahertz (THz) communications for a single-carrier and a multi-carrier single antenna point-to-point communication system. The multi-carrier system and single carrier system consider the orthogonal frequency division multiplexing (OFDM) and the minimum mean square error linear equalizer (MMSE-LE), respectively. We compare the frame-error-rate (FER) and throughput performance of both the systems for a THz communication environment with the carrier frequency of 300GHz and the tapped delay line (TDL) channel models described in 3GPP. It is observed from the simulation results that the OFDM systems outperform the MMSE-LE for various configurations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.261-270
• /
• 2007

The Delay Threshold-based Priority Queueing (DTPQ) scheme has been shown useful for scheduling both real-time (RT) and non-real-time (NRT) service traffic in mobile broadband wireless access (MBWA) systems. The overall system capacity can be maximized subject to their QoS requirement by the DTPQ scheme, which takes the urgency of the RT service into account only when their head-of-line (HOL) packet delays exceed a given delay threshold. In practice, the optimum delay threshold must be configured under the varying service scenarios and a corresponding traffic load, e.g., the number of RT and NRTusers in the system. In this paper, we propose an adaptive version of DTPQ scheme, which updates the delay threshold by taking the urgency and channel conditions of RT service users into account. By evaluating the proposed approach in an orthogonal frequency division multiple access/time division duplex (OFDM/TDD)-based broadband mobile access system, it has been found that our adaptive scheme significantly improves the system capacity as compared to the existing DTPQ scheme with a fixed delay threshold.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.98-101
• /
• 1998

The intermodulation distortion(IMD) due to laser diode nonlinearity of an asynhcronous direct sequence code diviion multiple access(DS/CDMA) system in wireless-optical transmission system model is analzed. A third order polynomial is used to represent laser diode nonlinearity. In DS/CDMA system, only one harmonic of the third-order intermodulation term falls on the signal frequency band and influences the system performance characteristics. To cancel multi-user interference and nonlinear distortion in a DS/CDMA wireless-optical transmission system model, the simple transversal filter structure with N-taps of (N-1) tap delay of 1 chip time delay line is used. It is necessary to select an optimal modulation index that provides a maximum signal-to-noise ratio and the results are useful for CDMA system design.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.40-49
• /
• 2008

In this paper, we have described a Simulated Radar Target Generation Equipment(SRTGE) for evaluating the performance of a developed radar system. In order to change a simulated target range(or time delay), the variable optical delay line structure is used in SRTGE, In addition, SRTGE is required to generate a target return signal which is composed of variable amplitude and Doppler velocity. The interference such as noise jamming and clutter is also produced from SRTGE for evaluating ECCM(Electronic-Counter-Counter Measure) capability of radar.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.149-151
• /
• 2005

This paper deals with the novel control algorithm of single-phase hybrid active power filter for the compensation of harmonic current components in nonlinear R-L load with passive active power filters. To construct two-axes coordinate, an imaginary second phase was made by giving time delay to line current. In this proposed method, the new signal, which was the delayed through the filtering by the phase-delay property of low-pass filter, is used as the secondary phase. Because two phases have different phase, instantaneous calculation of harmonic current is possible. In this paper, a reference voltage is created by multiplying gain of filter by compensation current using the rotating reference frames that synchronizes with source-frequency, not applying to instantaneous reactive power theory which has been used with the existing fixed reference frames. This paper shows the experimental results, which provide a high accuracy and extremely fast response of single-phase hybrid active Bower filter under the operation with the proposed control method.