• 제목/요약/키워드: Frequency component

검색결과 1,818건 처리시간 0.029초

사다리꼴 PZT/Ag Laminate 외팔보 발전기의 압전 에너지 하베스팅 특성 (Piezoelectric Energy Harvesting Characteristics of Trapezoidal PZT/Ag Laminate Cantilever Generator)

  • 나용현;이민선;윤지선;홍연우;백종후;조정호;이정우;정영훈
    • 한국전기전자재료학회논문지
    • /
    • 제31권7호
    • /
    • pp.462-468
    • /
    • 2018
  • The piezoelectric energy harvesting characteristics of a trapezoidal cantilever generator with lead zirconate titanate (PZT) laminate were investigated with various Ag inner electrodes. The piezoelectric mode of operation was a transverse mode by using a planar electrode pattern. The piezoelectric cantilever generator was fabricated using trapezoidal cofired-PZT/Ag laminates by five specimens of 2, 3, 4, 7, and 13 layers of Ag. As the number of Ag electrodes increased, impedance and output voltage at resonant frequency significantly decreased, and capacitance and output current showed an increasing tendency. A maximum output power density of $7.60mW/cm^3$ was realized for the specimen with seven Ag layers in the optimal condition of acceleration (1.2 g) and resistive load ($600{\Omega}$), which corresponds to a normalized power factor of $5.28mW/g^2{\cdot}cm^3$.

최근 5년간 국내 연근해에서 발생한 해양사고에 대한 주성분분석 (Principal Component Analysis on Marine Casualties Occurred at Korean Littoral Sea in Recent 5 Years)

  • 김영식
    • 수산해양교육연구
    • /
    • 제28권2호
    • /
    • pp.465-472
    • /
    • 2016
  • 본 연구에서는 2010년부터 2014년까지 최근 5년간 우리 나라 주변해역에서 발생하여 중앙해양안전심판원의 재결을 마친 1417건의 해양사고에 대해 이를 25개 요인별로 분류하고, SPSS 통계 프로그램에 의한 주성분분석(Principal Component Analysis; PCA)을 행하여 이들 각 요인들의 상관성 및 주요 해양원인을 분석 고찰하였다. 얻어진 주요한 결과들을 요약하면 다음과 같다. 1. 해양사고의 주된 원인은 기관설비취급불량, 화기취급불량, 항행법규소홀, 침로선정유지불량, 경계소홀 등 기관실 및 조타실 관련 인적요인에 의해 발생한다. 2. 조타실 관련 인적요인에 의해 발생하는 사고는 충돌과 좌초 등이 큰 비중을 차지하며, 기관실 관련 인적요인에 의해 발생하는 사고유형은 주로 기관손상이나 화재폭발 등이다. 3. 주성분분석의 결과 제1주성분은 해양사고의 출현율을, 제2주성분은 해양사고의 원인을, 제3주 성분은 해양사고의 유형을 나타낸다.

연속 웨이브렛 Ridge를 이용한 순간주파수 결정 (Determination of Instantaneous Frequency By Continuous Wavelets Ridge)

  • 김태형;윤동한
    • 한국정보통신학회논문지
    • /
    • 제9권1호
    • /
    • pp.8-15
    • /
    • 2005
  • 비선형적인 위상 변화를 지닌 비정상(non-stationary)신호는 레이더, 통신, 지질탐사, 음향, 생체공학 응용등 여러 분야에서 쉽게 접하는 신호이다. 비정상 신호는 일반적으로 시간의 변환에 따라 신호의 스페트럼 특성이 변화하는 신호를 의미하며, 순간 주파수는 신호의 특정시간에 해당하는 신호성분의 주파수를 의미한다. 따라서 열거한 레이더, 음향, 생ㅊ신호등에 있어서 순간 주파수는 신호의 물리적 특성을 파악하기 위한 중요한 변수이다. 이 논문에서는 연속 웨이브렛 변환을 이용한 비정상 신호의 순간 주파수를 결정에 대하여 연구하였고, 기존의 방법과 비교하였다. 신호에 잡음이나 여러 가지의 주파수가 중첩되어 있는 경우, 기존에 방법들로서는 정확한 순간 주파수를 결정할 수 없는 반면, 웨이브렛 변환을 이용한 경우, 신호의 성분에 관계없이 상당히 정확한 순간주파수를 결정할 수 있음에 대하여 설명하였다.

Frequency analysis of GPS data for structural health monitoring observations

  • Pehlivan, Huseyin
    • Structural Engineering and Mechanics
    • /
    • 제66권2호
    • /
    • pp.185-193
    • /
    • 2018
  • In this study, low- and high-frequency structure behaviors were identified and a systematic analysis procedure was proposed using noisy GPS data from a 165-m-high tower in ${\dot{I}}stanbul$, Turkey. The raw GPS data contained long- and short-periodic position changes and noisy signals at different frequencies. To extract the significant results from this complex dataset, the general structure and components of the GPS signal were modeled and analyzed in the time and frequency domains. Uncontrolled jumps and deviations involving the signal in the time domain were pre-filtered. Then, the signal was converted to the frequency domain after applying low- and high-pass filters, and the frequency and periodic component values were calculated. The spectrum of the tower motion obtained from the filtered GPS data had dominant peaks at a low frequency of $1.15572{\times}10-4Hz$ and a high frequency of 0.16624 Hz, consistent with two equivalent GPS datasets. Then, the signal was reconstructed using inverse Fourier transform with the dominant low frequency values to obtain filtered and interpretable clean signals. With the proposed sequence, processing of noisy data collected from the GPS receivers mounted very close to the structure is effective in revealing the basic behaviors and features of buildings.

Laboratory study on the modulation evolution of nonlinear wave trains

  • Dong, G.H.;Ma, Y.X.;Zhang, W.;Ma, X.Z.
    • Ocean Systems Engineering
    • /
    • 제2권3호
    • /
    • pp.189-203
    • /
    • 2012
  • New experiments focusing on the evolution characteristics of nonlinear wave trains were conducted in a large wave flume. A series of wave trains with added sidebands, varying initial steepness, perturbed amplitudes and frequencies, were physically generated in a long wave flume. The experimental results show that the increasing wave steepness, increases the speed of sidebands growth. To study the frequency and phase modulation, the Morlet wavelet transform is adopted to extract the instantaneous frequency of wave trains and the phase functions of each wave component. From the instantaneous frequency, there are local frequency downshifts, even an effective frequency downshift was not observed. The frequency modulation increases with an increase in amplitude modulation, and abrupt changes of instantaneous frequencies occur at the peak modulation. The wrapped phase functions show that in the early stage of the modulation, the phase of the upper sideband first diverges from that of the carrier waves. However, at the later stage, the discrepancy phase from the carrier wave transformed to the lower sideband. The phase deviations appear in the front of the envelope's peaks. Furthermore, the evolution of the instantaneous frequency exhibits an approximate recurrence-type for the experiment with large imposed sidebands, even when the corresponding recurrence is not observed in the Fourier spectrum.

비침습적 관절질환 진단을 위한 관절음의 시주파수 분석 (Time-frequency Analysis of Vibroarthrographic Signals for Non-invasive Diagnosis of Articular Pathology)

  • 김거식;송철규;서정환
    • 전기학회논문지
    • /
    • 제57권4호
    • /
    • pp.729-734
    • /
    • 2008
  • Vibroarthrographic(VAG) signals, emitted by human knee joints, are non-stationary and multi-component in nature and time-frequency distributions(TFD) provide powerful means to analyze such signals. The objective of this paper is to classify VAG signals, generated during joint movement, into two groups(normal and patient group) using the characteristic parameters extracted by time-frequency transform, and to evaluate the classification accuracy. Noise within TFD was reduced by singular value decomposition and back-propagation neural network(BPNN) was used for classifying VAG signals. The characteristic parameters consist of the energy parameter, energy spread parameter, frequency parameter, frequency spread parameter by Wigner-Ville distribution and the amplitude of frequency distribution, the mean and the median frequency by fast Fourier transform. Totally 1408 segments(normal 1031, patient 377) were used for training and evaluating BPNN. As a result, the average value of the classification accuracy was 92.3(standard deviation ${\pm}0.9$)%. The proposed method was independent of clinical information, and showed good potential for non-invasive diagnosis and monitoring of joint disorders such as osteoarthritis and chondromalacia patella.

주파수 성분을 이용한 TR-UWB 시스템의 성능분석 (Performance analysis of TR-UWB systems using Frequency-components)

  • 장동헌;양훈기
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 춘계종합학술대회 A
    • /
    • pp.985-988
    • /
    • 2008
  • 본 논문에서는 기준 펄스와 데이터 펄스로 구성된 TR(Transmitted-reference) 신호를 전송하는 TR-UWB 시스템에서 시간 영역의 수신 신호를 주파수 영역의 신호로 변환하는 과정을 거쳐서 얻어 낸 주파수 성분을 수신기에서 상관연산을 통해서 신호대잡음비를 개선하는 TR-UWB 시스템을 제안한다. 또한, TR-UWB 신호의 복소수 성분, 주파수 변환 특성을 이용한 이론적인 분석을 통해 시스템성능을 유도하고 기존 시스템과의 성능을 비교 분석한다. 모의 실험을 통해 제시한 TR-UWB 시스템에 의해 성능이 개선됨을 검증한다.

  • PDF

Optimal Design of High Frequency Transformer for 150W Class Module-Integrated Converter

  • Yoo, Jin-Hyung;Jung, Tae-Uk
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권1호
    • /
    • pp.288-294
    • /
    • 2015
  • Recently, the module-integrated converter has shown an interest in the photovoltaic generation system. In this system, the high frequency transformer should be compact and efficient. The proposed method is based on the correlation characteristic between the copper and core loss to minimize the loss of transformer. By sizing an effective cross-sectional area and window area of core, the amount of loss is minimized. This paper presents the design and analysis of high frequency transformer by using the 3D finite element model coupled with DC-DC converter circuit for more accurate analysis by considering the nonlinear voltage and current waveforms in converter circuit. The current waveform in each winding is realized by using the ideal DC voltage source and switching component. And, the thermal analysis is performed to satisfy the electrical and thermal design criteria.

Suppression of Cavitation Instabilities in an Inducer by Circumferential Groove and Explanation of Higher Frequency Components

  • Kang, Dong-Hyuk;Arimoto, Yusuke;Yonezawa, Koichi;Horiguchi, Hironori;Kawata, Yutaka;Hah, Chunill;Tsujimoto, Yoshinobu
    • International Journal of Fluid Machinery and Systems
    • /
    • 제3권2호
    • /
    • pp.137-149
    • /
    • 2010
  • The purpose of the present research is to suppress cavitation instabilities by using a circumferential groove. The circumferential groove was designed based on CFD so that the tip leakage vortex is trapped by the groove and does not interact with the next blade. Experimental results show that the groove can suppress rotating cavitation, asymmetric cavitation and cavitation surge. However, weak instabilities with higher frequency could not be suppressed by the groove. From the analysis of pressure pattern similar to that for rotor-stator interaction, it was found that the higher frequency components are caused by the interaction of backflow vortices with the inducer blades.

전력시스템의 부하주파수 제어를 위한 IA-Fuzzy 전 보상 PID 제어기 설계 (Design of a IA-Fuzzy Precompensated PID Controller for Load Frequency Control of Power Systems)

  • 정형환;이정필;정문규;김창현
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제26권4호
    • /
    • pp.415-424
    • /
    • 2002
  • In this paper, a robust fuzzy precompensated PID controller using immune algorithm for load frequency control of 2-area power system is proposed. Here, a fuzzy precompensated PID controller is designed as a fuzzy logic based precompensation approach for PID controller. This scheme is easily implemented by adding a fuzzy precompensator to an existing PID controller. We optimize the fuzzy precompensator with an immune algorithm for complementing the demerit such as the difficulty of the component selection of fuzzy controller, namely, scaling factor, membership function and fuzzy rules. Simulation results show that the proposed robust load frequency controller can achieve good performance even in the presence of generation rate constraints.