• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.2
• /
• pp.111-120
• /
• 2020

This study assessed the reliability of the agricultural water supply based on future climate change scenarios, and suggested plans to improve the reliability in order to promote the adaptability of irrigation water in agricultural reservoirs to climate change. The assessment of agricultural water supply reliability was performed on reservoirs which had a lower water quantity than their design basis and which had recently been subject to drought. In other words, from the irrigation districts of main intake works among the reservoirs managed by the Korea Rural Community Corporation, 1~2 districts in each province-that is, a total of 13 districts -that were recently designated as a district for securing agricultural water (drought prevention district) were selected. Climate change scenarios were applied to the selected districts to analyze their future water supply reliability compared to the current level. All districts selected showed a drought frequency of 4 years or shorter, which demonstrated the need to establish climate change response plans. As plans for responding to climate change, a plan that utilizes supplemental intake works to reduce the area of the irrigation districts of main intake works, and another one that increases the capacity of main intake works were adopted to reanalyze their water supply reliability. When the area of the irrigation districts of main intake works was reduced by about 30~40%, the drought frequency dropped to more than 10 years, securing the reliability of water supply. To secure the reliability by increasing the capacity of main intake works, it was calculated that about 19,000~2,400,000 tons need to be added to each reservoir. In addition, climate change response plans were suggested to improve the reliability of the water supply in each district based on the results of economic analysis.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.76-81
• /
• 2011

Power system frequency is the main index of power quality indicating an abnormal state and disturbances of systems. The nominal frequency is deviated by sudden change in generation and load or faults. Power system is used as frequency relay to detection for off-nominal frequency operation and connecting a generator to an electrical system, and V/F relay to detection for an over-excitation condition. Under these circumstances, power system should maintain the nominal frequency. And frequency and frequency deviation should accurately measure and quickly estimate by frequency measurement device. The well-known classical method, frequency estimation technique based on the DFT, could be produce the gain error in accuracy. To meet the requirements for high accuracy, recently Wavelet transforms and analysis are receiving new attention. The Wavelet analysis is possible to calculate the time-frequency analysis which is easy to obtain frequency information of signals. However, it is difficult to apply in real-time implementation because of heavy computation burdens. Nowadays, the computational methods using the Wavelet function and transformation techniques have been searched on these fields. In this paper, we apply the Recursive Discrete Wavelet Transform (RDWT) for the frequency estimation. In order to evaluate performance of the proposed technique, the user-defined arbitrary waveforms are used.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.4
• /
• pp.271-277
• /
• 2002

This paper was described on the characteristics of bottlenose dolphin (Tursiops truncatus) whistle to develop a warning and attracting acoustic system which can be made friends woith environment and minimized to the fishing pollution from Cetaceans. The experiment for the acoustics of bottlenose dolphin whistle was carried out in dolphin performance hall at Seoul Grand Park during 18th~19th April, 2002. The frequency and the spectrum level of whistle a same pool were revealed 6~10KHz and 85㏈ but those revealed two harmonic waves a 6.7KHz and 21.3KHz for the frequency and 110㏈ and 94㏈ for the spectrum level, respectively, when a dolphin isolated from others. The range of frequency change of whistle was 3.86KHz and continuous time was 0.08 sec. The range of frequency change 10.20 KHz higher as 14.06 KHz and continuous time was 0.11sec longer as 0.19sec when a dolphin isolated from others. By the Mann-Whitney test for the result, there was a significant difference for the range of frequency change and continuous time between normal condition and when a dolphin was isolated from others. The pattern of whistle at the dolphin performance hall was five types and the frequency was getting increased slowly in the range of 5~10KHz at normal condition but there were pattern change of 5~20KHz at the isolated condition. Therefore it is thought that these experiments would be valuable for the development of acoustic system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.1
• /
• pp.81-96
• /
• 2017

Along with climate change, it is reported that the scale and the frequency of extreme climate events (e.g. heavy rain, typhoon, etc.) show unstable tendency of increase. In case of Korea, also, the frequency of heavy rainfall shows increasing tendency, thus causing natural disaster damage in downtown and agricultural areas by rainfall that exceeds the design criteria of hydraulic structures. In order to minimize natural disaster damage, it is necessary to analyze how extreme precipitation event changes under climate change. Therefore a new design criteria based on non-stationarity frequency analysis is needed to consider a tendency of future extreme precipitation event and to prepare countermeasures to climate change. And a quantitative and objective characteristic analysis could be a key to preparing countermeasures to climate change impact. In this study, non-stationarity frequency analysis was performed and inundation risk indices developed by 4 inundation characteristics (e.g. inundation area, inundation depth, inundation duration, and inundation radius) were assessed. The study results showed that future probable rainfall could exceed the existing design criteria of hydraulic structures (rivers of state: 100yr-200yr, river banks: 50yr-100yr) reaching over 500yr frequency probable rainfall of the past. Inundation characteristics showed higher value in the future compared to the past, especially in sections with tributary stream inflow. Also, the inundation risk indices were estimated as 0.14 for the past period of 1973-2015, and 0.25, 0.29, 1.27 for the future period of 2016-2040, 2041-2070, 2071-2100, respectively. The study findings are expected to be used as a basis to analyze future inundation damage and to establish management solutions for rivers with inundation risks.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.125-137
• /
• 2013

Global warming and climate change have influence on abnormal weather pattern and the rainstorm has a localized and intensive tendency in Korea. IPCC(2007) also reported the rainstorm and typhoon will be more and more stronger due to temperature increase during the 21st century. Flood Estimation Handbook(Institute of Hydrology, 1999) published in United Kingdom, in the case that the data period is shorter than return period, recommends the regional frequency analysis rather than point frequency analysis. This study uses Regional Climate Model(RCM) of Korea Meteorological Administration(KMA) for obtaining the rainfall and for performing the regional frequency analysis. We used the rainfall data from 58 stations managed by KMA and used L-moment algorithm suggested by Hosking and wallis(1993) for the regional frequency analysis considering the climate change. As the results, in most stations, the rainfall amounts in frequencies have an increasing tendency except for some stations. According to the A1B scenario, design rainfall is increased by 7~10% compared with the reference period(1970-2010).

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.215-217
• /
• 2008

The most widely used method for searching contents of mot ion picture compares contents by extracted cuts. The cut extract ion methods, such as CHD(Color Histogram Difference) or ECR(Edge Change Ratio), are very weak at modifications such as cropping, resizing and low bit rate. The suggested method uses audio contents for indexing and searching to make search be robust against these modification. Scenes of audio contents are extracted for modification-robust search. And based on these scenes, make spectral powers binary on each frequency bin. in the time-frequency domain. The suggested method shows failure rate less than 1% on the false positive error and the true negative error to the modified(using cropping, clipping, row bit rate, addtive frame) contents.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.8
• /
• pp.88-95
• /
• 2006

This paper proposes an analog type Active Power Filter that adapts to the frequency change of a distributed power supply system. The proposed system removes the harmonic currents in the source power by injecting a compensation current that has the same frequency, 180 degree out of phase with the harmonic currents generated by the load. The detection of the harmonics in the source power for creating the compensating current is realized by a PLL(Phase Lock Loop) and a VCGIC(Voltage Controlled Generalized Impedance Converter). The operation of the proposed system is verified by simulation and experiment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.423-426
• /
• 2001

Recently we have reported that the meander-patterned amorphous FeCoSiB films exhibit large change in their high frequency impedance by applying a strain, suggesting that the films are very attractive for making of a highly sensitive strain sensor elements. In this study, the effect of anisotropy on a change in the impedance of sputtered amorphous film patterns was investigated in the frequency range from 1MHz to 1GHz. As a function of applied strains, the high frequency impedance was extremely changed in the case of film patterns with transverse anisotropy due to excellent magnetomechanical coupling properties. As a summary, the maximum figure of merit f has measured about 2600 in the case of transverse anisotropy, and about 500 in the case of longitudinal anisotropy at 500 MHz. These values of F are approximately more than 1000 times higher than that of a conventional metal strain gauge (F 2) and more than 10 times higher than that of a semiconductor gauge (F 200).

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.215-219
• /
• 2001

The resonators made of piezoelectric crystals such as a quartz crystal are widely used. Their frequency-temperature characteristics are of primary importance for their applications to the frequency control devices. The characteristics estimation is useful for determining their design parameters. In the present paper, several types of resonators are numerically analyzed. The numerical solutions are made using 3-D Finite Element Modeling, and the results are compared with the theoretical values whenever they are available. To demonstrate the validity of the present numerical approach, the application is made to the analysis of the plates with some well-established cutting angles. For the resonator stable with temperature change, the cutting angle is important in which the temperature coefficient of the first order is chosen to be zero. The rotated Y-cut plates in thickness-shear mode are considered. The equivalent circuit representation is often used fur describing the characteristics at the electrical terminals which enables the circuit analysis including the effect of temperature change by using the circuit simulators. The equivalent circuit parameters are obtained by fitting the admittance-frequency curve from the finite element analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.110-113
• /
• 2000

In general, speed control method of the elevator system has used motor pole change type or motor primary voltage control type. But it will change to vector control type in order to increase it's reliability, riding comfort and decrease material cost. It is the conception of vector control type in order to increase it's reliability, riding comfort and decrease material cost. It is the conception of vector control that primary current of the induction motor be controlled independently with magnetizing current(field current of DC motor) and torque current(armature current of DC motor). In this paper, by analyzing the effect of the time constant variation of rotor of the induction motor on the slip frequency type indirect vector control, a drive system for the motor will be constructed using a fuzzy slip frequency type indirect vector controller with fuzzy control method for estimating the vector time constant in the slip frequency type indirect vector control. The goal of this study is to enabling even more efficient speed control by constructing on elevator driver based on the newly developed drive system.