• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.12-19
• /
• 2015

In this paper, temporal variations of acoustic transmission loss (TL) affected by internal tide are studied by computer simulation using oceanic data measured in the southern sea of Jeju Island in summer. Temperature was measured with depth (bottom depth are nearly 80 m) in two sites near Seogwipo coast every one hour for 25 hours during July 27 and 28, 2009. The periodic fluctuation of temperature due to the internal tide was observed and its vertical displacement was more than 10 m. In order to investigate temporal variation of TL by internal tide, acoustic propagation between two measurement sites (3.8 km distance) was simulated with a source depth of 10 m. TL variation for 1/3 octave band of 100 Hz center frequency highly coincided with tidal period but more complex variation with indistinct tidal period was observed for 1 kHz. Maximun standard deviation of TL variation was 4.2 dB for 100 Hz at 2.8 km distance from a source and it was 3.7 dB for 1 kHz. The tidal variation was also shown in detection range and its maximum variance was less than 1 km. These results imply that temporal variation of TL should be considered for acoustic researches at the southern sea of Jeju Island.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1240-1246
• /
• 2006

Generally, there are two types of main factors to affect output power quality of a auxiliary power supply an EMU(electric multiple unit). One is a voltage flicker by amplitude modulation of short time and air compressors. The other is repetitive motion of large capacity motor such as air compressors, HVAC unit etc. in main factors. This paper compared two kinds of fluorescent lamp, 32W (after remodeling interior) and 40W(before remodeling interior) and measured the light output varying input power(AC220V) for a flicker phenomenon related power supply of lamps in EMU. Also, we analyzed a flicker considering EMU operating time and density in order to grasp main factors of a load change to cause a voltage change. As a results of test, a 40W fluorescent lamp was more insensitive with 20.26% degree an eye recognition degree sides about changes of the input power and lower with 19.9% voltage side generating flicker compare with fluorescent lamp 32W. Also, we confirmed the fact which the fluorescent lamp flicker was generated by varying fluorescent lamp output voltage when the commercial EMU was in high driving density and at the busy time. Additionally, we confirmed the frequency band which an EMU passenger could feel sensitively blinking of a fluorescent lamp was visually $8Hz{\sim}15Hz$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.4
• /
• pp.431-439
• /
• 2010

Cross-interferometic synthetic aperture radar (CInSAR) technique from ERS-2 and Envisat images is capable of generating submeter-accuracy digital elevation model (DEM). However, it is very difficult to produce high-quality CInSAR-derived DEM due to the difference in the azimuth and range pixel size between ERS-2 and Envisat images as well as the small height ambiguity of CInSAR interferogram. In this study, we have proposed an efficient method to overcome the problems, produced a high-quality DEM over northern Alaska, and compared the CInSAR-derived DEM with the national elevation dataset (NED) DEM from U.S. Geological Survey. In the proposed method, azimuth common band filtering is applied in the radar raw data processing to mitigate the mis-registation due to the difference in the azimuth and range pixel size, and differential SAR interferogram (DInSAR) is used for reducing the unwrapping error occurred by the high fringe rate of CInSAR interferogram. Using the CInSAR DEM, we have identified and corrected man-made artifacts in the NED DEM. The wave number analysis further confirms that the CInSAR DEM has valid Signal in the high frequency of more than 0.08 radians/m (about 40m) while the NED DEM does not. Our results indicate that the CInSAR DEM is superior to the NED DEM in terms of both height precision and ground resolution.

• Journal of Life Science
• /
• v.17 no.6 s.86
• /
• pp.756-761
• /
• 2007

Cenus Malus is a long-lived woody species primarily distributed throughout Asia. Many species of this genus are regarded as agriculturally and ecologically important. The phynetics and genetic diversity among eight species of genus Malus were reconstructed using the random amplified polymorphic DNA (RAPD) markers. In a simple measure of intraspecies variability by the percentage of polymorphic bands, the M. micromalus exhibited the lowest variation (34.7%). The M. pumila showed the highest (50.0%). Mean number of alleles per locus (A) ranged from 1.347 to 1.500 with a mean of 1.437. The phenotypic frequency of each band was calculated and used in estimating genetic diversify (H) within species. The mean of H was 0.190 across species, varying from 0.155 to 0.220. In particular, two cultivated species, M. pumila and M. asiatica, had high expected diversity, 0.314 and 0.307, respectively. On a per locus basis, the proportion of total genetic variation due to differences among species ranged from 0.388 to 0.472 with a mean of 0.423, indicating that 42.3% of the total variation was found among species. The phylogenetic tree showed three distinct elates. One includes M. sieversii, M. pumila, and M. asiatica. Another includes three M. baccata taxa. The other includes M. sieboldii, M. floribunsa, and M. micromalus. One variety and one form of M. sieboldii were well separated each other. RAPD markers are useful in germ-plasm classification of genus Malus and evolutionary studies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1076-1084
• /
• 2006

In this paper, we first review a concept of hybrid division duplexing (HDD) scheme, which has been proposed as a new type of duplexing scheme useful for a next generation mobile communication system and its implementation issues, including the unified radio resource management for HDD scheme. The HDD scheme maintains the advantages of both TDD and FDD at the same time while providing a useful structure to control the inter-cell interference, caused by an asymmetric traffic load of multimedia services over uplink and downlink in the TDD scheme. Employing two frequency bands, one for TDD scheme and the other for FDD scheme, uplink is operating under the TDD scheme only, while downlink is operating under the TDD or FDD scheme, depending on the location of mobile station. In the HDD scheme, therefore, it must determine a type of duplexing scheme to employ in the downlink and futhermore, a ratio of uplink and downlink duration to meet a given traffic load of asymmetric service, which requires some unified radio resource management for handling the subsequent inter-cell interference. In this paper, we propose a distributed adaptive control approach as a means of unified radio resource management for a HDD system that maximizes the overall system efficiency by fully utilizing the resource in TDD band, while minimizing the inter-cell interference.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.883-891
• /
• 2016

In this paper, we propose an asymmetric dipole antenna utilizing the metal case as a ground radiator for a pen-type wireless presenter which operates in the ISM frequency band(2.4~2.48 GHz). A normal mode helix mounted on the top end of the long metallic cylinder case which acts as the ground plane takes the form of the asymmetric dipole structure in the proposed antenna. The metallic cylinder case which performs as a radiating element increases the inherent narrow bandwidth and low gain of the helix. The effects of the hand contacts with the metal case on the antenna performance are measured and analyzed with a specially designed human phantom. Experimental results show that the -10 dB return loss bandwidth of the proposed antenna in free space(no hand contact) is 200 MHz that ranges from 2.3 to 2.5 GHz and the maximum gain is measured to be 5 dBi. Under the normal operating condition where the metal case is contacted with a human hand, the bandwidth is 480 MHz from 2.24 to 2.72 GHz. The maximum gain is 2 dBi, lowered by 3 dB due to the hand contact.

• Reproductive and Developmental Biology
• /
• v.28 no.1
• /
• pp.37-43
• /
• 2004

This study was carried out to investigate PSS (Porcine Stress Syndrome) with the PSE (Pale, Soft, Exudative) in 319 different pigs(Yorkshire 150; Landrace 89 and Duroc 80). The PCR-RFLP method was adapted to detect the ryanodine receptor (RYR 1) gene mutation and to estimate the genotype frequency of the RYR1 gene in breeding pig population. The DNA samples were collected from hair follicles of pigs of Yorkshire, Landrace and Duroc. After DNA amplification by PCR, the PCR products were digested by restriction enzyme, Cfo I. Primary PCR products of ryanodine receptor gene were length of 659 bp in hair follicle and their second PCR products were length of 522 bp in hair follicle. The exon region (522 bp) including point mutation ($C \arrow T; Arg \arrow Cys$) in the porcine ryanodine receptor gene, which is a causal mutation for PSS, was digested with Cfo I restriction enzyme. The RYR1 gene was classifed into three genotypes by agarose gel electrophoresis. The normal homozygous (NN) individuals showed two DNA fragments consisted of 439 and 83 bp. The mutant homozygous (nn) individuals showed only one DNA fragment 522 bp. In addition, all three fragments (522, 439 and 83 bp) were showed in heterozygous (Nn) carrier animals. The normal homozygous (NN), heterozygous (Nn) and mutant homozygous (nn) were 98.00, 2.00 and 0.00% in Yorkshire pigs, 87.64, 11.24 and 1.12% in Landrace, 100.00, 0.00 and 0.00% in Duroc, respectively. The gene frequencies of N and n were 0.990 and 0.010 in Yorkshire pigs, 0.933 and 0.067 in Landrace, 1.000 and 0.000 in Duroc, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.697-708
• /
• 2016

As the needs for fast wireless communication technology in various fields, including companies, individuals, etc., grows, many research projects related to the coverage of propagation are being carried out for plaining optimized communication services. On the other hand, there are some limitations in surveying and analyzing propagation in highland areas. To provide a better communication service of a new service, a range of radio environment conditions based on a wide radio bandwidth (selection of propagation model, correction of value in accordance with radio bandwidth, etc.) should be considered. In particular, radio environment conditions are becoming increasingly sophisticated. By the early detection of real-time changes in the radio spectrum, which is based on an examination and research of regional occupied band width condition, proper measures should be established. To make a proper solution of above, the basic real-time analysis of spectrum distribution status by regional groups is necessary. In addition, the establishment of prompt measures should be enable by stored or analyzed radio data. In an attempt to predict reliable propagation coverage, this thesis examines the limited propagation data with HTZ Warfare, which were collected from domestic high land sites faced with limited access. Furthermore, a comparative result value evaluation for an optimized propagation model was performed through testing simulations, and frequency-dependent and propagation model-dependent analysis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.195-201
• /
• 2016

Eddy current testing (ECT) is commonly applied for the inspection of automated production lines of metallic products, because it has a high inspection speed and a reasonable price. When ECT is applied for the inspection of a metallic object having an uneven target surface, such as the spline gear of a spline shaft, it is difficult to distinguish between the original signal obtained from the sensor and the signal generated by a defect because of the relatively large surface signals having similar frequency distributions. To facilitate the detection of defect signals from the spline gear, implementation of high-order filters is essential, so that the fault signals can be distinguished from the surrounding noise signals, and simultaneously, the pass-band of the filter can be adjusted according to the status of each production line and the object to be inspected. We will examine the infinite impulse filters (IIR filters) available for implementing an advanced filter for ECT, and attempt to detect the flaw signals through optimization of system design parameters for detecting the signals at the system level.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.293-302
• /
• 1991

The anomalous sea level deviation or storm surge caused by the typhoon Thelma in 1987 are studied analysing tidal observation data at 7 stations in the south coast of Korean peninsula. The surges are calculated by subtracting the predicted tidal height from the observed tidal record. The tidal deviation at these stations along the coast are discussed in association with meteorological data. The sea level anomalies are studied by means of the empirical orthogonal function (EOF) analysis and the fast fourier transform (FFT) method. The results of analysis suggest that the peak value of surges are higher at the tidal stations in semi-enclosed bay and in long narrow channel than at the ones facing with the open sea. From the result of EOF analysis, the temporal and spatial fluctuations of storm surge can be described by the first EOF mode, which explains 63% of the total variances during the passage of typhoon Thelma. The deviation of storm surge in the studied areas indicates bi-modal peak during the passage of typhoon Thelma. From the results of FFT spectrum analysis, the peak of energy of autospectrum for surge, atmospheric pressure, and wind stress appeared at low frequency fluctuations band of 0.008-0.076 cph over the 4 stations. Auto-correlation function of surge showed periodicity, while that of atmospheric pressure and wind stress indicates no periodicity. The result of FFT analysis shows that the typhoon surges are related chiefly with the change of atmospheric pressure in an open bay (Cheju Harbor), but with the wind stress in a semi-enclosed bay (Yeosu Harbor).